Simulations and calculations as verification tools for design and performance of high-voltage equipment

M. Kriegel; X. Zhu; H. Digard; S. Feitoza; M. Glinkowski; A. Grund; H.K. Kim; J. Lopez Roldan; P. Robin-Jouan; L. Sluis, van der; R.P.P. Smeets; T. Uchii; D. Yoshida

Simulations and calculations as verification tools for design and performance of high-voltage equipment

M. Kriegel, X. Zhu, H. Digard, S. Feitoza, M. Glinkowski, A. Grund, H.K. Kim, J. Lopez Roldan, P. Robin-Jouan, L. Sluis, van der, R.P.P. Smeets, T. Uchii, D. Yoshida

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

11 Downloads (Pure)

Abstract

Recognizing an increasing role of commercial modelling software in the power industry, Study Committee A3 decided to evaluate existing simulation technologies to determine the extent to which they can be used as verification tools to enhance understanding of equipment performance, to extrapolate test results, to provide an alternative to testing, or to replace some of the tests. WG A3.20 compiled an inventory of electrical, mechanical, thermal, magnetic, and other stresses which "A3-type" components (substation equipment except transformers) are subjected to in service, based on the relevant tests mandated by IEC/ANSI standards. For all investigated applications, WG A3.20 listed expected simulation results and the preferred numerical methods to be used for different specific problems. An assessment has been made to determine to what degree such stresses can be simulated.

Original language	English
Title of host publication	Proceedings of the Cigre conference 2008,25-28 August 2008, Paris, France
Place of Publication	Paris
Publisher	CIGRE
Pages	A3-210
Publication status	Published - 2008
Event	CIGRE Session 2008 - Paris, France Duration: 25 Aug 2008 → 28 Aug 2008

Conference

Conference	CIGRE Session 2008
Country/Territory	France
City	Paris
Period	25/08/08 → 28/08/08

Cite this

Kriegel, M., Zhu, X., Digard, H., Feitoza, S., Glinkowski, M., Grund, A., Kim, H. K., Lopez Roldan, J., Robin-Jouan, P., Sluis, van der, L., Smeets, R. P. P., Uchii, T., & Yoshida, D. (2008). Simulations and calculations as verification tools for design and performance of high-voltage equipment. In Proceedings of the Cigre conference 2008,25-28 August 2008, Paris, France (pp. A3-210). CIGRE.

@inproceedings{cae3ab28b9394f91ba6b83767c333021,

title = "Simulations and calculations as verification tools for design and performance of high-voltage equipment",

abstract = "Recognizing an increasing role of commercial modelling software in the power industry, Study Committee A3 decided to evaluate existing simulation technologies to determine the extent to which they can be used as verification tools to enhance understanding of equipment performance, to extrapolate test results, to provide an alternative to testing, or to replace some of the tests. WG A3.20 compiled an inventory of electrical, mechanical, thermal, magnetic, and other stresses which {"}A3-type{"} components (substation equipment except transformers) are subjected to in service, based on the relevant tests mandated by IEC/ANSI standards. For all investigated applications, WG A3.20 listed expected simulation results and the preferred numerical methods to be used for different specific problems. An assessment has been made to determine to what degree such stresses can be simulated.",

author = "M. Kriegel and X. Zhu and H. Digard and S. Feitoza and M. Glinkowski and A. Grund and H.K. Kim and {Lopez Roldan}, J. and P. Robin-Jouan and {Sluis, van der}, L. and R.P.P. Smeets and T. Uchii and D. Yoshida",

year = "2008",

language = "English",

pages = "A3--210",

booktitle = "Proceedings of the Cigre conference 2008,25-28 August 2008, Paris, France",

publisher = "CIGRE",

note = "CIGRE Session 2008 ; Conference date: 25-08-2008 Through 28-08-2008",

}

Kriegel, M, Zhu, X, Digard, H, Feitoza, S, Glinkowski, M, Grund, A, Kim, HK, Lopez Roldan, J, Robin-Jouan, P, Sluis, van der, L, Smeets, RPP, Uchii, T & Yoshida, D 2008, Simulations and calculations as verification tools for design and performance of high-voltage equipment. in Proceedings of the Cigre conference 2008,25-28 August 2008, Paris, France. CIGRE, Paris, pp. A3-210, CIGRE Session 2008, Paris, France, 25/08/08.

Simulations and calculations as verification tools for design and performance of high-voltage equipment. / Kriegel, M.; Zhu, X.; Digard, H. et al.
Proceedings of the Cigre conference 2008,25-28 August 2008, Paris, France. Paris: CIGRE, 2008. p. A3-210.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

TY - GEN

T1 - Simulations and calculations as verification tools for design and performance of high-voltage equipment

AU - Kriegel, M.

AU - Zhu, X.

AU - Digard, H.

AU - Feitoza, S.

AU - Glinkowski, M.

AU - Grund, A.

AU - Kim, H.K.

AU - Lopez Roldan, J.

AU - Robin-Jouan, P.

AU - Sluis, van der, L.

AU - Smeets, R.P.P.

AU - Uchii, T.

AU - Yoshida, D.

PY - 2008

Y1 - 2008

N2 - Recognizing an increasing role of commercial modelling software in the power industry, Study Committee A3 decided to evaluate existing simulation technologies to determine the extent to which they can be used as verification tools to enhance understanding of equipment performance, to extrapolate test results, to provide an alternative to testing, or to replace some of the tests. WG A3.20 compiled an inventory of electrical, mechanical, thermal, magnetic, and other stresses which "A3-type" components (substation equipment except transformers) are subjected to in service, based on the relevant tests mandated by IEC/ANSI standards. For all investigated applications, WG A3.20 listed expected simulation results and the preferred numerical methods to be used for different specific problems. An assessment has been made to determine to what degree such stresses can be simulated.

AB - Recognizing an increasing role of commercial modelling software in the power industry, Study Committee A3 decided to evaluate existing simulation technologies to determine the extent to which they can be used as verification tools to enhance understanding of equipment performance, to extrapolate test results, to provide an alternative to testing, or to replace some of the tests. WG A3.20 compiled an inventory of electrical, mechanical, thermal, magnetic, and other stresses which "A3-type" components (substation equipment except transformers) are subjected to in service, based on the relevant tests mandated by IEC/ANSI standards. For all investigated applications, WG A3.20 listed expected simulation results and the preferred numerical methods to be used for different specific problems. An assessment has been made to determine to what degree such stresses can be simulated.

M3 - Conference contribution

SP - A3-210

BT - Proceedings of the Cigre conference 2008,25-28 August 2008, Paris, France

PB - CIGRE

CY - Paris

T2 - CIGRE Session 2008

Y2 - 25 August 2008 through 28 August 2008

ER -

Simulations and calculations as verification tools for design and performance of high-voltage equipment

Abstract

Conference

Fingerprint

Cite this