Simulation of coupled electromagnetic and heat dissipation problems

H.H.J.M. Janssen; E.J.W. Maten, ter; D. Houwelingen, van

doi:10.1109/20.312651

Simulation of coupled electromagnetic and heat dissipation problems

H.H.J.M. Janssen
, E.J.W. Maten, ter
, D. Houwelingen, van

Research output: Contribution to journal › Article › Academic › peer-review

16 Citations (Scopus)

503 Downloads (Pure)

Abstract

A description is given of an integrated simulation environment for the solution of coupled electromagnetic and heat dissipation problems in two dimensions, in particular for the field of induction heating, dielectric heating, and hysteresis heating. The equations are coupled because the most important physical parameters (permeability, conductivity, permittivity) may depend on temperature in a nonlinear way. The software has been constructed with the high level language PDL, using the general 'Mammy' design concept. All heating problems under consideration may involve thermal convection and radiation at the boundaries of the objects. Also, additional temperature dependent heat sources (e.g. resistor heating) can be defined. One can include instantaneous effects of movement in the plane on the temperature transfer. Effects around Curie temperature transitions can be analyzed.

Original language	English
Pages (from-to)	3331-3334
Journal	IEEE Transactions on Magnetics
Volume	30
Issue number	5
DOIs	https://doi.org/10.1109/20.312651
Publication status	Published - 1994

Access to Document

10.1109/20.312651

Metis234981Final published version, 397 KB

Cite this

@article{36c6ba684cdd4a558591a41893c7cda2,

title = "Simulation of coupled electromagnetic and heat dissipation problems",

abstract = "A description is given of an integrated simulation environment for the solution of coupled electromagnetic and heat dissipation problems in two dimensions, in particular for the field of induction heating, dielectric heating, and hysteresis heating. The equations are coupled because the most important physical parameters (permeability, conductivity, permittivity) may depend on temperature in a nonlinear way. The software has been constructed with the high level language PDL, using the general 'Mammy' design concept. All heating problems under consideration may involve thermal convection and radiation at the boundaries of the objects. Also, additional temperature dependent heat sources (e.g. resistor heating) can be defined. One can include instantaneous effects of movement in the plane on the temperature transfer. Effects around Curie temperature transitions can be analyzed.",

author = "H.H.J.M. Janssen and \{Maten, ter\}, E.J.W. and \{Houwelingen, van\}, D.",

year = "1994",

doi = "10.1109/20.312651",

language = "English",

volume = "30",

pages = "3331--3334",

journal = "IEEE Transactions on Magnetics",

issn = "0018-9464",

publisher = "Institute of Electrical and Electronics Engineers",

number = "5",

}

TY - JOUR

T1 - Simulation of coupled electromagnetic and heat dissipation problems

AU - Janssen, H.H.J.M.

AU - Maten, ter, E.J.W.

AU - Houwelingen, van, D.

PY - 1994

Y1 - 1994

N2 - A description is given of an integrated simulation environment for the solution of coupled electromagnetic and heat dissipation problems in two dimensions, in particular for the field of induction heating, dielectric heating, and hysteresis heating. The equations are coupled because the most important physical parameters (permeability, conductivity, permittivity) may depend on temperature in a nonlinear way. The software has been constructed with the high level language PDL, using the general 'Mammy' design concept. All heating problems under consideration may involve thermal convection and radiation at the boundaries of the objects. Also, additional temperature dependent heat sources (e.g. resistor heating) can be defined. One can include instantaneous effects of movement in the plane on the temperature transfer. Effects around Curie temperature transitions can be analyzed.

AB - A description is given of an integrated simulation environment for the solution of coupled electromagnetic and heat dissipation problems in two dimensions, in particular for the field of induction heating, dielectric heating, and hysteresis heating. The equations are coupled because the most important physical parameters (permeability, conductivity, permittivity) may depend on temperature in a nonlinear way. The software has been constructed with the high level language PDL, using the general 'Mammy' design concept. All heating problems under consideration may involve thermal convection and radiation at the boundaries of the objects. Also, additional temperature dependent heat sources (e.g. resistor heating) can be defined. One can include instantaneous effects of movement in the plane on the temperature transfer. Effects around Curie temperature transitions can be analyzed.

U2 - 10.1109/20.312651

DO - 10.1109/20.312651

M3 - Article

SN - 0018-9464

VL - 30

SP - 3331

EP - 3334

JO - IEEE Transactions on Magnetics

JF - IEEE Transactions on Magnetics

IS - 5

ER -

Simulation of coupled electromagnetic and heat dissipation problems

Abstract

Access to Document

Fingerprint

Cite this