Response time of electromagnetic field strength probes

Robert Vogt-Ardatjew; Ramiro Serra; Frank Leferink

doi:10.1109/APEMC.2013.7360654

Response time of electromagnetic field strength probes

Robert Vogt-Ardatjew, Ramiro Serra, Frank Leferink

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

6 Citations (Scopus)

Abstract

Modern signals in for instance wireless communication systems and radars use very complex modulation with high peakto- average ratio. Other signals, such as in reverberation chambers with mode stirring, vary very fast with a high dynamic range. Conventional probes, using thermocouples or diode detection, show wrong measurement results due to the slow response time of the detector or the analog-to-digital converter, or the limited dynamic range of the detector. These response times are often missing in data sheets, and in case they are listed the numbers are not always correct. This paper describes pulse response experiments performed with a radiation hazard meter, a diode detector, several commercial field strength probes and probes using logarithmic detectors.

Original language	English
Title of host publication	Proceedings of the Asia-Pacific International Symposium and Exhibition on Electromagnetic Compatibility: 20-23 May, 2013, Melbourne, Australia
Publisher	Institute of Electrical and Electronics Engineers
Pages	1-6
ISBN (Electronic)	9781509018857
ISBN (Print)	9781922107022
DOIs	https://doi.org/10.1109/APEMC.2013.7360654
Publication status	Published - 21 Dec 2015
Event	Asia-Pacific Symposium on Electromagnetic Compatibility, APEMC 2013 - Melbourne, Australia Duration: 20 May 2013 → 23 May 2013

Conference

Conference	Asia-Pacific Symposium on Electromagnetic Compatibility, APEMC 2013
Country/Territory	Australia
City	Melbourne
Period	20/05/13 → 23/05/13

Keywords

electromagnetic field strength probes
sensors

Access to Document

10.1109/APEMC.2013.7360654

Cite this

Vogt-Ardatjew, R., Serra, R., & Leferink, F. (2015). Response time of electromagnetic field strength probes. In Proceedings of the Asia-Pacific International Symposium and Exhibition on Electromagnetic Compatibility: 20-23 May, 2013, Melbourne, Australia (pp. 1-6). Article 7360654 Institute of Electrical and Electronics Engineers. https://doi.org/10.1109/APEMC.2013.7360654

@inproceedings{070f42898fe84d8598864bb9041b9268,

title = "Response time of electromagnetic field strength probes",

abstract = "Modern signals in for instance wireless communication systems and radars use very complex modulation with high peakto- average ratio. Other signals, such as in reverberation chambers with mode stirring, vary very fast with a high dynamic range. Conventional probes, using thermocouples or diode detection, show wrong measurement results due to the slow response time of the detector or the analog-to-digital converter, or the limited dynamic range of the detector. These response times are often missing in data sheets, and in case they are listed the numbers are not always correct. This paper describes pulse response experiments performed with a radiation hazard meter, a diode detector, several commercial field strength probes and probes using logarithmic detectors.",

keywords = "electromagnetic field strength probes, sensors",

author = "Robert Vogt-Ardatjew and Ramiro Serra and Frank Leferink",

year = "2015",

month = dec,

day = "21",

doi = "10.1109/APEMC.2013.7360654",

language = "English",

isbn = "9781922107022",

pages = "1--6",

booktitle = "Proceedings of the Asia-Pacific International Symposium and Exhibition on Electromagnetic Compatibility: 20-23 May, 2013, Melbourne, Australia",

publisher = "Institute of Electrical and Electronics Engineers",

address = "United States",

note = "Asia-Pacific Symposium on Electromagnetic Compatibility, APEMC 2013 ; Conference date: 20-05-2013 Through 23-05-2013",

}

Vogt-Ardatjew, R, Serra, R & Leferink, F 2015, Response time of electromagnetic field strength probes. in Proceedings of the Asia-Pacific International Symposium and Exhibition on Electromagnetic Compatibility: 20-23 May, 2013, Melbourne, Australia., 7360654, Institute of Electrical and Electronics Engineers, pp. 1-6, Asia-Pacific Symposium on Electromagnetic Compatibility, APEMC 2013, Melbourne, Australia, 20/05/13. https://doi.org/10.1109/APEMC.2013.7360654

Response time of electromagnetic field strength probes. / Vogt-Ardatjew, Robert; Serra, Ramiro; Leferink, Frank.
Proceedings of the Asia-Pacific International Symposium and Exhibition on Electromagnetic Compatibility: 20-23 May, 2013, Melbourne, Australia. Institute of Electrical and Electronics Engineers, 2015. p. 1-6 7360654.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

TY - GEN

T1 - Response time of electromagnetic field strength probes

AU - Vogt-Ardatjew, Robert

AU - Serra, Ramiro

AU - Leferink, Frank

PY - 2015/12/21

Y1 - 2015/12/21

N2 - Modern signals in for instance wireless communication systems and radars use very complex modulation with high peakto- average ratio. Other signals, such as in reverberation chambers with mode stirring, vary very fast with a high dynamic range. Conventional probes, using thermocouples or diode detection, show wrong measurement results due to the slow response time of the detector or the analog-to-digital converter, or the limited dynamic range of the detector. These response times are often missing in data sheets, and in case they are listed the numbers are not always correct. This paper describes pulse response experiments performed with a radiation hazard meter, a diode detector, several commercial field strength probes and probes using logarithmic detectors.

AB - Modern signals in for instance wireless communication systems and radars use very complex modulation with high peakto- average ratio. Other signals, such as in reverberation chambers with mode stirring, vary very fast with a high dynamic range. Conventional probes, using thermocouples or diode detection, show wrong measurement results due to the slow response time of the detector or the analog-to-digital converter, or the limited dynamic range of the detector. These response times are often missing in data sheets, and in case they are listed the numbers are not always correct. This paper describes pulse response experiments performed with a radiation hazard meter, a diode detector, several commercial field strength probes and probes using logarithmic detectors.

KW - electromagnetic field strength probes

KW - sensors

UR - http://www.scopus.com/inward/record.url?scp=85002188864&partnerID=8YFLogxK

U2 - 10.1109/APEMC.2013.7360654

DO - 10.1109/APEMC.2013.7360654

M3 - Conference contribution

SN - 9781922107022

SP - 1

EP - 6

BT - Proceedings of the Asia-Pacific International Symposium and Exhibition on Electromagnetic Compatibility: 20-23 May, 2013, Melbourne, Australia

PB - Institute of Electrical and Electronics Engineers

T2 - Asia-Pacific Symposium on Electromagnetic Compatibility, APEMC 2013

Y2 - 20 May 2013 through 23 May 2013

ER -

Response time of electromagnetic field strength probes

Abstract

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this