Requirements for 3-D magnetostriction measurement instruments

B.J.H. Bruyn, de; N.H. Vrijsen; G. Gersem, de; E.A. Lomonova

doi:10.1109/TMAG.2014.2362572

Requirements for 3-D magnetostriction measurement instruments

B.J.H. Bruyn, de, N.H. Vrijsen, G. Gersem, de, E.A. Lomonova

Research output: Contribution to journal › Article › Academic › peer-review

4 Citations (Scopus)

292 Downloads (Pure)

Abstract

This paper concerns the requirement analysis and implementation of a measurement instrument, which can identify the 3-D magnetostriction strain. To measure magnetostriction, a high-accuracy magnetic flux density and strain measurement are required, while the mechanical stress in the sample is minimized. The full block tester is proposed as a measurement instrument. In this instrument, homogeneity of flux density within the measured sample and the strain measurement resolution are sufficient, but stress caused by magnetic forces is higher than required.

Original language	English
Pages (from-to)	1-4
Number of pages	4
Journal	IEEE Transactions on Magnetics
Volume	51
Issue number	3
DOIs	https://doi.org/10.1109/TMAG.2014.2362572
Publication status	Published - 2015

Access to Document

10.1109/TMAG.2014.2362572

355650007869829Final author version , 1.42 MB

Cite this

@article{2b92e653898b4bd1927956dbd28d8044,

title = "Requirements for 3-D magnetostriction measurement instruments",

abstract = "This paper concerns the requirement analysis and implementation of a measurement instrument, which can identify the 3-D magnetostriction strain. To measure magnetostriction, a high-accuracy magnetic flux density and strain measurement are required, while the mechanical stress in the sample is minimized. The full block tester is proposed as a measurement instrument. In this instrument, homogeneity of flux density within the measured sample and the strain measurement resolution are sufficient, but stress caused by magnetic forces is higher than required.",

author = "{Bruyn, de}, B.J.H. and N.H. Vrijsen and {Gersem, de}, G. and E.A. Lomonova",

year = "2015",

doi = "10.1109/TMAG.2014.2362572",

language = "English",

volume = "51",

pages = "1--4",

journal = "IEEE Transactions on Magnetics",

issn = "0018-9464",

publisher = "Institute of Electrical and Electronics Engineers",

number = "3",

}

TY - JOUR

T1 - Requirements for 3-D magnetostriction measurement instruments

AU - Bruyn, de, B.J.H.

AU - Vrijsen, N.H.

AU - Gersem, de, G.

AU - Lomonova, E.A.

PY - 2015

Y1 - 2015

N2 - This paper concerns the requirement analysis and implementation of a measurement instrument, which can identify the 3-D magnetostriction strain. To measure magnetostriction, a high-accuracy magnetic flux density and strain measurement are required, while the mechanical stress in the sample is minimized. The full block tester is proposed as a measurement instrument. In this instrument, homogeneity of flux density within the measured sample and the strain measurement resolution are sufficient, but stress caused by magnetic forces is higher than required.

AB - This paper concerns the requirement analysis and implementation of a measurement instrument, which can identify the 3-D magnetostriction strain. To measure magnetostriction, a high-accuracy magnetic flux density and strain measurement are required, while the mechanical stress in the sample is minimized. The full block tester is proposed as a measurement instrument. In this instrument, homogeneity of flux density within the measured sample and the strain measurement resolution are sufficient, but stress caused by magnetic forces is higher than required.

U2 - 10.1109/TMAG.2014.2362572

DO - 10.1109/TMAG.2014.2362572

M3 - Article

SN - 0018-9464

VL - 51

SP - 1

EP - 4

JO - IEEE Transactions on Magnetics

JF - IEEE Transactions on Magnetics

IS - 3

ER -

Requirements for 3-D magnetostriction measurement instruments

Abstract

Access to Document

Fingerprint

Cite this