Reconfigurable subsampling receiver architecture for wireless body area networks

Duan Zhao, Wouter A. Serdijn, Li Huang, Guido Dolmans

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

4 Citations (Scopus)

Abstract

The wide range of wireless body area network (WBAN) applications gives rise to different system requirements for the carrier frequencies and data rates. In order to accommodate various standards in WBAN applications, a universal receiver system with good performance and low power is highly desirable. The subsampling receiver architecture is one of the promising receiver architectures that might fulfill the features of low power consumption and reconfigurability. However, there are two main concerns, namely the frequency stability and noise performance. In order to overcome these problems, a novel subsampling receiver architecture with two sampling branches as well as a new compensation algorithm are proposed and analyzed in this paper. The frequency stability and noise performance of the receivers can be greatly improved using this architecture. Simulation in different scenarios is carried out, and the results verify the effectiveness of the proposed architecture.

Original languageEnglish
Title of host publication2011 IEEE 22nd International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC'11
PublisherInstitute of Electrical and Electronics Engineers
Pages2153-2157
Number of pages5
ISBN (Print)9781457713484
DOIs
Publication statusPublished - 1 Dec 2011
Externally publishedYes
Event22nd IEEE International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC 2011) - Toronto, ON, Canada
Duration: 11 Sep 201114 Sep 2011

Conference

Conference22nd IEEE International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC 2011)
CountryCanada
CityToronto, ON
Period11/09/1114/09/11

Fingerprint

Frequency stability
Electric power utilization
Sampling
Compensation and Redress

Cite this

Zhao, D., Serdijn, W. A., Huang, L., & Dolmans, G. (2011). Reconfigurable subsampling receiver architecture for wireless body area networks. In 2011 IEEE 22nd International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC'11 (pp. 2153-2157). [6139896] Institute of Electrical and Electronics Engineers. https://doi.org/10.1109/PIMRC.2011.6139896
Zhao, Duan ; Serdijn, Wouter A. ; Huang, Li ; Dolmans, Guido. / Reconfigurable subsampling receiver architecture for wireless body area networks. 2011 IEEE 22nd International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC'11. Institute of Electrical and Electronics Engineers, 2011. pp. 2153-2157
@inproceedings{5a3ceac8e205454284fe60b92ef94857,
title = "Reconfigurable subsampling receiver architecture for wireless body area networks",
abstract = "The wide range of wireless body area network (WBAN) applications gives rise to different system requirements for the carrier frequencies and data rates. In order to accommodate various standards in WBAN applications, a universal receiver system with good performance and low power is highly desirable. The subsampling receiver architecture is one of the promising receiver architectures that might fulfill the features of low power consumption and reconfigurability. However, there are two main concerns, namely the frequency stability and noise performance. In order to overcome these problems, a novel subsampling receiver architecture with two sampling branches as well as a new compensation algorithm are proposed and analyzed in this paper. The frequency stability and noise performance of the receivers can be greatly improved using this architecture. Simulation in different scenarios is carried out, and the results verify the effectiveness of the proposed architecture.",
author = "Duan Zhao and Serdijn, {Wouter A.} and Li Huang and Guido Dolmans",
year = "2011",
month = "12",
day = "1",
doi = "10.1109/PIMRC.2011.6139896",
language = "English",
isbn = "9781457713484",
pages = "2153--2157",
booktitle = "2011 IEEE 22nd International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC'11",
publisher = "Institute of Electrical and Electronics Engineers",
address = "United States",

}

Zhao, D, Serdijn, WA, Huang, L & Dolmans, G 2011, Reconfigurable subsampling receiver architecture for wireless body area networks. in 2011 IEEE 22nd International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC'11., 6139896, Institute of Electrical and Electronics Engineers, pp. 2153-2157, 22nd IEEE International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC 2011), Toronto, ON, Canada, 11/09/11. https://doi.org/10.1109/PIMRC.2011.6139896

Reconfigurable subsampling receiver architecture for wireless body area networks. / Zhao, Duan; Serdijn, Wouter A.; Huang, Li; Dolmans, Guido.

2011 IEEE 22nd International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC'11. Institute of Electrical and Electronics Engineers, 2011. p. 2153-2157 6139896.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

TY - GEN

T1 - Reconfigurable subsampling receiver architecture for wireless body area networks

AU - Zhao, Duan

AU - Serdijn, Wouter A.

AU - Huang, Li

AU - Dolmans, Guido

PY - 2011/12/1

Y1 - 2011/12/1

N2 - The wide range of wireless body area network (WBAN) applications gives rise to different system requirements for the carrier frequencies and data rates. In order to accommodate various standards in WBAN applications, a universal receiver system with good performance and low power is highly desirable. The subsampling receiver architecture is one of the promising receiver architectures that might fulfill the features of low power consumption and reconfigurability. However, there are two main concerns, namely the frequency stability and noise performance. In order to overcome these problems, a novel subsampling receiver architecture with two sampling branches as well as a new compensation algorithm are proposed and analyzed in this paper. The frequency stability and noise performance of the receivers can be greatly improved using this architecture. Simulation in different scenarios is carried out, and the results verify the effectiveness of the proposed architecture.

AB - The wide range of wireless body area network (WBAN) applications gives rise to different system requirements for the carrier frequencies and data rates. In order to accommodate various standards in WBAN applications, a universal receiver system with good performance and low power is highly desirable. The subsampling receiver architecture is one of the promising receiver architectures that might fulfill the features of low power consumption and reconfigurability. However, there are two main concerns, namely the frequency stability and noise performance. In order to overcome these problems, a novel subsampling receiver architecture with two sampling branches as well as a new compensation algorithm are proposed and analyzed in this paper. The frequency stability and noise performance of the receivers can be greatly improved using this architecture. Simulation in different scenarios is carried out, and the results verify the effectiveness of the proposed architecture.

UR - http://www.scopus.com/inward/record.url?scp=84857540573&partnerID=8YFLogxK

U2 - 10.1109/PIMRC.2011.6139896

DO - 10.1109/PIMRC.2011.6139896

M3 - Conference contribution

AN - SCOPUS:84857540573

SN - 9781457713484

SP - 2153

EP - 2157

BT - 2011 IEEE 22nd International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC'11

PB - Institute of Electrical and Electronics Engineers

ER -

Zhao D, Serdijn WA, Huang L, Dolmans G. Reconfigurable subsampling receiver architecture for wireless body area networks. In 2011 IEEE 22nd International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC'11. Institute of Electrical and Electronics Engineers. 2011. p. 2153-2157. 6139896 https://doi.org/10.1109/PIMRC.2011.6139896