Printable Cement-Based Materials: Fresh Properties Measurements and Control

Timothy Wangler; Robert J. Flatt; Nicolas Roussel; Arnaud Perrot; Mohammed Sonebi; Rob Wolfs; Freek Bos; Dirk Lowke; Niklas Freund; Dietmar Stephan; Ursula Pott; Lex Reiter; Steffen Grünewald; Wilson Ricardo Leal da Silva; Geert De Schutter

doi:10.1007/978-3-030-90535-4_4

Printable Cement-Based Materials: Fresh Properties Measurements and Control

Timothy Wangler
, Robert J. Flatt
, Nicolas Roussel
, Arnaud Perrot
, Mohammed Sonebi
, Rob Wolfs
, Freek Bos
, Dirk Lowke
, Niklas Freund
, Dietmar Stephan
, Ursula Pott
, Lex Reiter
, Steffen Grünewald
, Wilson Ricardo Leal da Silva
, Geert De Schutter

Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review

12 Citations (Scopus)

1 Downloads (Pure)

Abstract

Digital fabrication with cementitious materials is a rapidly growing field of research in which the evolution of strength during the various processes, such as 3D printing, is the key controlling parameter. The strength evolves over multiple orders of magnitude during the process, and thus, it is essential to properly characterize the strength evolution in order to guarantee process success. This chapter summarizes the state of the art in these characterization methods for digital fabrication with fresh cementitious materials, reviewing well-known and more recently developed methods.

Original language	English
Title of host publication	Digital Fabrication with Cement-Based Materials
Editors	Nicolas Roussel, Dirk Lowke
Publisher	Springer
Chapter	4
Pages	99-136
Number of pages	38
ISBN (Electronic)	978-3-030-90535-4
ISBN (Print)	978-3-030-90534-7
DOIs	https://doi.org/10.1007/978-3-030-90535-4_4
Publication status	Published - Jan 2022

Publication series

Name	RILEM State-of-the-Art Reports
Volume	36
ISSN (Print)	2213-204X
ISSN (Electronic)	2213-2031

Bibliographical note

Publisher Copyright:
© 2022, RILEM.

Access to Document

10.1007/978-3-030-90535-4_4Licence: Unspecified

Cite this

Wangler, T., Flatt, R. J., Roussel, N., Perrot, A., Sonebi, M., Wolfs, R., Bos, F., Lowke, D., Freund, N., Stephan, D., Pott, U., Reiter, L., Grünewald, S., Silva, W. R. L. D., & De Schutter, G. (2022). Printable Cement-Based Materials: Fresh Properties Measurements and Control. In N. Roussel, & D. Lowke (Eds.), Digital Fabrication with Cement-Based Materials (pp. 99-136). (RILEM State-of-the-Art Reports; Vol. 36). Springer. https://doi.org/10.1007/978-3-030-90535-4_4

@inbook{8ce086fc9ca54ebf8a3d6b28deaaf01e,

title = "Printable Cement-Based Materials: Fresh Properties Measurements and Control",

abstract = "Digital fabrication with cementitious materials is a rapidly growing field of research in which the evolution of strength during the various processes, such as 3D printing, is the key controlling parameter. The strength evolves over multiple orders of magnitude during the process, and thus, it is essential to properly characterize the strength evolution in order to guarantee process success. This chapter summarizes the state of the art in these characterization methods for digital fabrication with fresh cementitious materials, reviewing well-known and more recently developed methods.",

author = "Timothy Wangler and Flatt, \{Robert J.\} and Nicolas Roussel and Arnaud Perrot and Mohammed Sonebi and Rob Wolfs and Freek Bos and Dirk Lowke and Niklas Freund and Dietmar Stephan and Ursula Pott and Lex Reiter and Steffen Gr{\"u}newald and Silva, \{Wilson Ricardo Leal da\} and \{De Schutter\}, Geert",

note = "Publisher Copyright: {\textcopyright} 2022, RILEM.",

year = "2022",

month = jan,

doi = "10.1007/978-3-030-90535-4\_4",

language = "English",

isbn = "978-3-030-90534-7",

series = "RILEM State-of-the-Art Reports",

publisher = "Springer",

pages = "99--136",

editor = "Nicolas Roussel and Dirk Lowke",

booktitle = "Digital Fabrication with Cement-Based Materials",

address = "Germany",

}

Wangler, T, Flatt, RJ, Roussel, N, Perrot, A, Sonebi, M, Wolfs, R, Bos, F, Lowke, D, Freund, N, Stephan, D, Pott, U, Reiter, L, Grünewald, S, Silva, WRLD & De Schutter, G 2022, Printable Cement-Based Materials: Fresh Properties Measurements and Control. in N Roussel & D Lowke (eds), Digital Fabrication with Cement-Based Materials. RILEM State-of-the-Art Reports, vol. 36, Springer, pp. 99-136. https://doi.org/10.1007/978-3-030-90535-4_4

Printable Cement-Based Materials: Fresh Properties Measurements and Control. / Wangler, Timothy; Flatt, Robert J.; Roussel, Nicolas et al.
Digital Fabrication with Cement-Based Materials. ed. / Nicolas Roussel; Dirk Lowke. Springer, 2022. p. 99-136 (RILEM State-of-the-Art Reports; Vol. 36).

Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review

TY - CHAP

T1 - Printable Cement-Based Materials

T2 - Fresh Properties Measurements and Control

AU - Wangler, Timothy

AU - Flatt, Robert J.

AU - Roussel, Nicolas

AU - Perrot, Arnaud

AU - Sonebi, Mohammed

AU - Wolfs, Rob

AU - Bos, Freek

AU - Lowke, Dirk

AU - Freund, Niklas

AU - Stephan, Dietmar

AU - Pott, Ursula

AU - Reiter, Lex

AU - Grünewald, Steffen

AU - Silva, Wilson Ricardo Leal da

AU - De Schutter, Geert

PY - 2022/1

Y1 - 2022/1

N2 - Digital fabrication with cementitious materials is a rapidly growing field of research in which the evolution of strength during the various processes, such as 3D printing, is the key controlling parameter. The strength evolves over multiple orders of magnitude during the process, and thus, it is essential to properly characterize the strength evolution in order to guarantee process success. This chapter summarizes the state of the art in these characterization methods for digital fabrication with fresh cementitious materials, reviewing well-known and more recently developed methods.

AB - Digital fabrication with cementitious materials is a rapidly growing field of research in which the evolution of strength during the various processes, such as 3D printing, is the key controlling parameter. The strength evolves over multiple orders of magnitude during the process, and thus, it is essential to properly characterize the strength evolution in order to guarantee process success. This chapter summarizes the state of the art in these characterization methods for digital fabrication with fresh cementitious materials, reviewing well-known and more recently developed methods.

UR - https://www.scopus.com/pages/publications/85123594412

U2 - 10.1007/978-3-030-90535-4_4

DO - 10.1007/978-3-030-90535-4_4

M3 - Chapter

AN - SCOPUS:85123594412

SN - 978-3-030-90534-7

T3 - RILEM State-of-the-Art Reports

SP - 99

EP - 136

BT - Digital Fabrication with Cement-Based Materials

A2 - Roussel, Nicolas

A2 - Lowke, Dirk

PB - Springer

ER -

Printable Cement-Based Materials: Fresh Properties Measurements and Control

Abstract

Publication series

Bibliographical note

Access to Document

Other files and links

Fingerprint

Cite this