Power cable joint model in high frequency

Y. Li; P.A.A.F. Wouters; P. Wagenaars; P.C.J.M. Wielen, van der; E.F. Steennis

Power cable joint model in high frequency

Y. Li, P.A.A.F. Wouters, P. Wagenaars, P.C.J.M. Wielen, van der, E.F. Steennis

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

119 Downloads (Pure)

Abstract

Models in high frequency range for underground power cabling system are the basis for the analysis of many condition diagnostic techniques, for instance, partial discharge (PD) monitoring. This paper focuses on modeling of power cable joints. A cascaded transmission line model is proposed for 10kV oil-filled PILC-PILC straight power cable joint in thefrequency range of 300 kHz-800 MHz.It can be applied to interpret PD signal transmission and reflection behavior in power cable connections. The model is verified by S-parameter measurement.

Original language	English
Title of host publication	Proceedings of the 2012 IEEE International Conference on Condition Monitoring and Diagnosis, 23-27 September 2012, Bali, Indonesia
Place of Publication	Piscataway
Publisher	Institute of Electrical and Electronics Engineers
Pages	76-79
ISBN (Print)	978-1-4673-1018-5
Publication status	Published - 2012
Event	conference; CMD 2012; 2012-09-23; 2012-09-27 - Duration: 23 Sept 2012 → 27 Sept 2012

Conference

Conference	conference; CMD 2012; 2012-09-23; 2012-09-27
Period	23/09/12 → 27/09/12
Other	CMD 2012

Access to Document

publishers versionFinal published version, 2.05 MB

Cite this

@inproceedings{9ee7271e8a2c4145a1177a243099fe26,

title = "Power cable joint model in high frequency",

abstract = "Models in high frequency range for underground power cabling system are the basis for the analysis of many condition diagnostic techniques, for instance, partial discharge (PD) monitoring. This paper focuses on modeling of power cable joints. A cascaded transmission line model is proposed for 10kV oil-filled PILC-PILC straight power cable joint in thefrequency range of 300 kHz-800 MHz.It can be applied to interpret PD signal transmission and reflection behavior in power cable connections. The model is verified by S-parameter measurement.",

author = "Y. Li and P.A.A.F. Wouters and P. Wagenaars and {Wielen, van der}, P.C.J.M. and E.F. Steennis",

year = "2012",

language = "English",

isbn = "978-1-4673-1018-5",

pages = "76--79",

booktitle = "Proceedings of the 2012 IEEE International Conference on Condition Monitoring and Diagnosis, 23-27 September 2012, Bali, Indonesia",

publisher = "Institute of Electrical and Electronics Engineers",

address = "United States",

note = "conference; CMD 2012; 2012-09-23; 2012-09-27 ; Conference date: 23-09-2012 Through 27-09-2012",

}

Li, Y, Wouters, PAAF, Wagenaars, P, Wielen, van der, PCJM & Steennis, EF 2012, Power cable joint model in high frequency. in Proceedings of the 2012 IEEE International Conference on Condition Monitoring and Diagnosis, 23-27 September 2012, Bali, Indonesia. Institute of Electrical and Electronics Engineers, Piscataway, pp. 76-79, conference; CMD 2012; 2012-09-23; 2012-09-27, 23/09/12.

Power cable joint model in high frequency. / Li, Y.; Wouters, P.A.A.F.; Wagenaars, P. et al.
Proceedings of the 2012 IEEE International Conference on Condition Monitoring and Diagnosis, 23-27 September 2012, Bali, Indonesia. Piscataway: Institute of Electrical and Electronics Engineers, 2012. p. 76-79.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

TY - GEN

T1 - Power cable joint model in high frequency

AU - Li, Y.

AU - Wouters, P.A.A.F.

AU - Wagenaars, P.

AU - Wielen, van der, P.C.J.M.

AU - Steennis, E.F.

PY - 2012

Y1 - 2012

N2 - Models in high frequency range for underground power cabling system are the basis for the analysis of many condition diagnostic techniques, for instance, partial discharge (PD) monitoring. This paper focuses on modeling of power cable joints. A cascaded transmission line model is proposed for 10kV oil-filled PILC-PILC straight power cable joint in thefrequency range of 300 kHz-800 MHz.It can be applied to interpret PD signal transmission and reflection behavior in power cable connections. The model is verified by S-parameter measurement.

AB - Models in high frequency range for underground power cabling system are the basis for the analysis of many condition diagnostic techniques, for instance, partial discharge (PD) monitoring. This paper focuses on modeling of power cable joints. A cascaded transmission line model is proposed for 10kV oil-filled PILC-PILC straight power cable joint in thefrequency range of 300 kHz-800 MHz.It can be applied to interpret PD signal transmission and reflection behavior in power cable connections. The model is verified by S-parameter measurement.

M3 - Conference contribution

SN - 978-1-4673-1018-5

SP - 76

EP - 79

BT - Proceedings of the 2012 IEEE International Conference on Condition Monitoring and Diagnosis, 23-27 September 2012, Bali, Indonesia

PB - Institute of Electrical and Electronics Engineers

CY - Piscataway

T2 - conference; CMD 2012; 2012-09-23; 2012-09-27

Y2 - 23 September 2012 through 27 September 2012

ER -

Power cable joint model in high frequency

Abstract

Conference

Access to Document

Fingerprint

Cite this