Optimization and measurement of eddy current damping applied in a tuned mass damper

T.A. Beek, van; K.J.W. Pluk; J.W. Jansen; E.A. Lomonova

doi:10.1109/ICELMACH.2014.6960243

Optimization and measurement of eddy current damping applied in a tuned mass damper

T.A. Beek, van
, K.J.W. Pluk
, J.W. Jansen
, E.A. Lomonova

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

8 Citations (Scopus)

5 Downloads (Pure)

Abstract

This paper describes the optimization of the eddy current damping, applied in a tuned mass damper. A semi-analytical model based on scalar potential formulation is extended for different permanent magnet topologies. Optimal design parameters are acquired by particle swarm optimization. Measurements are performed for validating the semi-analytical model and optimization routine. Furthermore, an experiment is carried out to test a tuned mass damper with two optimal permanent magnet topologies.

Original language	English
Title of host publication	Proceedings of the XXIth International Conference on Electrical Machines, ICEM 2014, 2-5 September 2014, Berlin, Germany
Place of Publication	Piscataway
Publisher	Institute of Electrical and Electronics Engineers
Pages	609-615
DOIs	https://doi.org/10.1109/ICELMACH.2014.6960243
Publication status	Published - 2014

Access to Document

10.1109/ICELMACH.2014.6960243

Cite this

Beek, van, T. A., Pluk, K. J. W., Jansen, J. W., & Lomonova, E. A. (2014). Optimization and measurement of eddy current damping applied in a tuned mass damper. In Proceedings of the XXIth International Conference on Electrical Machines, ICEM 2014, 2-5 September 2014, Berlin, Germany (pp. 609-615). Institute of Electrical and Electronics Engineers. https://doi.org/10.1109/ICELMACH.2014.6960243

@inproceedings{ed9fe5cf15e9477fabce6d8f2e0e95a7,

title = "Optimization and measurement of eddy current damping applied in a tuned mass damper",

abstract = "This paper describes the optimization of the eddy current damping, applied in a tuned mass damper. A semi-analytical model based on scalar potential formulation is extended for different permanent magnet topologies. Optimal design parameters are acquired by particle swarm optimization. Measurements are performed for validating the semi-analytical model and optimization routine. Furthermore, an experiment is carried out to test a tuned mass damper with two optimal permanent magnet topologies.",

author = "\{Beek, van\}, T.A. and K.J.W. Pluk and J.W. Jansen and E.A. Lomonova",

year = "2014",

doi = "10.1109/ICELMACH.2014.6960243",

language = "English",

pages = "609--615",

booktitle = "Proceedings of the XXIth International Conference on Electrical Machines, ICEM 2014, 2-5 September 2014, Berlin, Germany",

publisher = "Institute of Electrical and Electronics Engineers",

address = "United States",

}

Beek, van, TA, Pluk, KJW, Jansen, JW & Lomonova, EA 2014, Optimization and measurement of eddy current damping applied in a tuned mass damper. in Proceedings of the XXIth International Conference on Electrical Machines, ICEM 2014, 2-5 September 2014, Berlin, Germany. Institute of Electrical and Electronics Engineers, Piscataway, pp. 609-615. https://doi.org/10.1109/ICELMACH.2014.6960243

Optimization and measurement of eddy current damping applied in a tuned mass damper. / Beek, van, T.A.; Pluk, K.J.W.; Jansen, J.W. et al.
Proceedings of the XXIth International Conference on Electrical Machines, ICEM 2014, 2-5 September 2014, Berlin, Germany. Piscataway: Institute of Electrical and Electronics Engineers, 2014. p. 609-615.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

TY - GEN

T1 - Optimization and measurement of eddy current damping applied in a tuned mass damper

AU - Beek, van, T.A.

AU - Pluk, K.J.W.

AU - Jansen, J.W.

AU - Lomonova, E.A.

PY - 2014

Y1 - 2014

N2 - This paper describes the optimization of the eddy current damping, applied in a tuned mass damper. A semi-analytical model based on scalar potential formulation is extended for different permanent magnet topologies. Optimal design parameters are acquired by particle swarm optimization. Measurements are performed for validating the semi-analytical model and optimization routine. Furthermore, an experiment is carried out to test a tuned mass damper with two optimal permanent magnet topologies.

AB - This paper describes the optimization of the eddy current damping, applied in a tuned mass damper. A semi-analytical model based on scalar potential formulation is extended for different permanent magnet topologies. Optimal design parameters are acquired by particle swarm optimization. Measurements are performed for validating the semi-analytical model and optimization routine. Furthermore, an experiment is carried out to test a tuned mass damper with two optimal permanent magnet topologies.

U2 - 10.1109/ICELMACH.2014.6960243

DO - 10.1109/ICELMACH.2014.6960243

M3 - Conference contribution

SP - 609

EP - 615

BT - Proceedings of the XXIth International Conference on Electrical Machines, ICEM 2014, 2-5 September 2014, Berlin, Germany

PB - Institute of Electrical and Electronics Engineers

CY - Piscataway

ER -

Beek, van TA, Pluk KJW, Jansen JW , Lomonova EA. Optimization and measurement of eddy current damping applied in a tuned mass damper. In Proceedings of the XXIth International Conference on Electrical Machines, ICEM 2014, 2-5 September 2014, Berlin, Germany. Piscataway: Institute of Electrical and Electronics Engineers. 2014. p. 609-615 doi: 10.1109/ICELMACH.2014.6960243

Optimization and measurement of eddy current damping applied in a tuned mass damper

Abstract

Access to Document

Fingerprint

Cite this