Optimisation and measurement of eddy current damping in a passive tuned mass damper

T.A. van Beek; K.J.W. Pluk; J.W. Jansen; E. Lomonova

doi:10.1049/iet-epa.2015.0445

Optimisation and measurement of eddy current damping in a passive tuned mass damper

T.A. van Beek, K.J.W. Pluk, J.W. Jansen, E. Lomonova

Research output: Contribution to journal › Article › Academic › peer-review

6 Citations (Scopus)

15 Downloads (Pure)

Abstract

This paper describes the optimisation of the eddy current damping, applied in a passive tuned mass damper (TMD). A semi-analytical model based on scalar potential formulation is extended for different permanent magnet (PM) topologies. Optimal design parameters are acquired by particle swarm optimisation. A 3-DoF mechanical model is presented to predict the quality reduction factor of the TMD. Measurements are performed for validating the semi-analytical model. Furthermore, an experiment is carried out to test a TMD with two optimal PM topologies for sinusoidal excitations

Original language	English
Pages (from-to)	641-648
Journal	IET Electric Power Applications
Volume	10
Issue number	7
DOIs	https://doi.org/10.1049/iet-epa.2015.0445
Publication status	Published - 1 Aug 2016

Access to Document

10.1049/iet-epa.2015.0445

Cite this

@article{ba36cdbdd91c46f6b703a475c81298f3,

title = "Optimisation and measurement of eddy current damping in a passive tuned mass damper",

abstract = "This paper describes the optimisation of the eddy current damping, applied in a passive tuned mass damper (TMD). A semi-analytical model based on scalar potential formulation is extended for different permanent magnet (PM) topologies. Optimal design parameters are acquired by particle swarm optimisation. A 3-DoF mechanical model is presented to predict the quality reduction factor of the TMD. Measurements are performed for validating the semi-analytical model. Furthermore, an experiment is carried out to test a TMD with two optimal PM topologies for sinusoidal excitations",

author = "{van Beek}, T.A. and K.J.W. Pluk and J.W. Jansen and E. Lomonova",

year = "2016",

month = aug,

day = "1",

doi = "10.1049/iet-epa.2015.0445",

language = "English",

volume = "10",

pages = "641--648",

journal = "IET Electric Power Applications",

issn = "1751-8660",

publisher = "Institution of Engineering and Technology (IET)",

number = "7",

}

TY - JOUR

T1 - Optimisation and measurement of eddy current damping in a passive tuned mass damper

AU - van Beek, T.A.

AU - Pluk, K.J.W.

AU - Jansen, J.W.

AU - Lomonova, E.

PY - 2016/8/1

Y1 - 2016/8/1

N2 - This paper describes the optimisation of the eddy current damping, applied in a passive tuned mass damper (TMD). A semi-analytical model based on scalar potential formulation is extended for different permanent magnet (PM) topologies. Optimal design parameters are acquired by particle swarm optimisation. A 3-DoF mechanical model is presented to predict the quality reduction factor of the TMD. Measurements are performed for validating the semi-analytical model. Furthermore, an experiment is carried out to test a TMD with two optimal PM topologies for sinusoidal excitations

AB - This paper describes the optimisation of the eddy current damping, applied in a passive tuned mass damper (TMD). A semi-analytical model based on scalar potential formulation is extended for different permanent magnet (PM) topologies. Optimal design parameters are acquired by particle swarm optimisation. A 3-DoF mechanical model is presented to predict the quality reduction factor of the TMD. Measurements are performed for validating the semi-analytical model. Furthermore, an experiment is carried out to test a TMD with two optimal PM topologies for sinusoidal excitations

U2 - 10.1049/iet-epa.2015.0445

DO - 10.1049/iet-epa.2015.0445

M3 - Article

SN - 1751-8660

VL - 10

SP - 641

EP - 648

JO - IET Electric Power Applications

JF - IET Electric Power Applications

IS - 7

ER -

Optimisation and measurement of eddy current damping in a passive tuned mass damper

Abstract

Access to Document

Fingerprint

Cite this