On the prediction of delamination during deep-drawing of polymer coated metal sheet

M.J. Bosch, van den; P.J.G. Schreurs; M.G.D. Geers

doi:10.1016/j.jmatprotec.2008.02.024

On the prediction of delamination during deep-drawing of polymer coated metal sheet

M.J. Bosch, van den, P.J.G. Schreurs, M.G.D. Geers

Research output: Contribution to journal › Article › Academic › peer-review

28 Citations (Scopus)

4 Downloads (Pure)

Abstract

This paper describes the development and application of a numerical model that can predict the delamination of the polymer coating from the steel substrate during deep-drawing.Experimentally characterized cohesive zones are used to describe the interface betweenthe polymer and the steel and are capable of modelling delamination or a prior partial lossof adhesion during an axisymmetric deep-drawing simulation. A parameter is proposed thatquantifies the interfacial integrity and is used to assess the influence of the tooling radii,the clearance between the punch and the die and the coating thickness on the interfacialintegrity.

Original language	English
Pages (from-to)	297-302
Journal	Journal of Materials Processing Technology
Volume	209
Issue number	1
DOIs	https://doi.org/10.1016/j.jmatprotec.2008.02.024
Publication status	Published - 2009

Access to Document

10.1016/j.jmatprotec.2008.02.024

Cite this

@article{d975abb1e89e4e47b0d78fb21e5cf13b,

title = "On the prediction of delamination during deep-drawing of polymer coated metal sheet",

abstract = "This paper describes the development and application of a numerical model that can predict the delamination of the polymer coating from the steel substrate during deep-drawing.Experimentally characterized cohesive zones are used to describe the interface betweenthe polymer and the steel and are capable of modelling delamination or a prior partial lossof adhesion during an axisymmetric deep-drawing simulation. A parameter is proposed thatquantifies the interfacial integrity and is used to assess the influence of the tooling radii,the clearance between the punch and the die and the coating thickness on the interfacialintegrity.",

author = "\{Bosch, van den\}, M.J. and P.J.G. Schreurs and M.G.D. Geers",

year = "2009",

doi = "10.1016/j.jmatprotec.2008.02.024",

language = "English",

volume = "209",

pages = "297--302",

journal = "Journal of Materials Processing Technology",

issn = "0924-0136",

publisher = "Elsevier B.V.",

number = "1",

}

TY - JOUR

T1 - On the prediction of delamination during deep-drawing of polymer coated metal sheet

AU - Bosch, van den, M.J.

AU - Schreurs, P.J.G.

AU - Geers, M.G.D.

PY - 2009

Y1 - 2009

N2 - This paper describes the development and application of a numerical model that can predict the delamination of the polymer coating from the steel substrate during deep-drawing.Experimentally characterized cohesive zones are used to describe the interface betweenthe polymer and the steel and are capable of modelling delamination or a prior partial lossof adhesion during an axisymmetric deep-drawing simulation. A parameter is proposed thatquantifies the interfacial integrity and is used to assess the influence of the tooling radii,the clearance between the punch and the die and the coating thickness on the interfacialintegrity.

AB - This paper describes the development and application of a numerical model that can predict the delamination of the polymer coating from the steel substrate during deep-drawing.Experimentally characterized cohesive zones are used to describe the interface betweenthe polymer and the steel and are capable of modelling delamination or a prior partial lossof adhesion during an axisymmetric deep-drawing simulation. A parameter is proposed thatquantifies the interfacial integrity and is used to assess the influence of the tooling radii,the clearance between the punch and the die and the coating thickness on the interfacialintegrity.

U2 - 10.1016/j.jmatprotec.2008.02.024

DO - 10.1016/j.jmatprotec.2008.02.024

M3 - Article

SN - 0924-0136

VL - 209

SP - 297

EP - 302

JO - Journal of Materials Processing Technology

JF - Journal of Materials Processing Technology

IS - 1

ER -

On the prediction of delamination during deep-drawing of polymer coated metal sheet

Abstract

Access to Document

Fingerprint

Cite this