Note : measuring breakdown characteristics during the hot re-ignition of high intensity discharge lamps using high frequency alternating current voltage

R.A.J.M. van den Bos; A. Sobota; F. Manders; G.M.W. Kroesen

doi:10.1063/1.4801850

Note : measuring breakdown characteristics during the hot re-ignition of high intensity discharge lamps using high frequency alternating current voltage

R.A.J.M. van den Bos, A. Sobota, F. Manders, G.M.W. Kroesen

Research output: Contribution to journal › Article › Academic › peer-review

4 Citations (Scopus)

107 Downloads (Pure)

Abstract

To investigate the cold and hot re-ignition properties of High Intensity Discharge (HID) lamps in more detail an automated setup was designed in such a way that HID lamps of various sizes and under different background pressures can be tested. The HID lamps are ignited with a ramped sinusoidal voltage signal with frequencies between 60 and 220 kHz and with amplitude up to 7.5 kV. Some initial results of voltage and current measurements on a commercially available HID lamp during hot and cold re-ignition are presented.

Original language	English
Article number	046103
Pages (from-to)	046103-1/3
Number of pages	3
Journal	Review of Scientific Instruments
Volume	84
DOIs	https://doi.org/10.1063/1.4801850
Publication status	Published - 2013

Access to Document

10.1063/1.4801850

publishers versionFinal published version, 628 KB

Fingerprint Dive into the research topics of 'Note : measuring breakdown characteristics during the hot re-ignition of high intensity discharge lamps using high frequency alternating current voltage'. Together they form a unique fingerprint.

Cite this

@article{9526e1a79527441e90485cf6c0763b1f,

title = "Note : measuring breakdown characteristics during the hot re-ignition of high intensity discharge lamps using high frequency alternating current voltage",

abstract = "To investigate the cold and hot re-ignition properties of High Intensity Discharge (HID) lamps in more detail an automated setup was designed in such a way that HID lamps of various sizes and under different background pressures can be tested. The HID lamps are ignited with a ramped sinusoidal voltage signal with frequencies between 60 and 220 kHz and with amplitude up to 7.5 kV. Some initial results of voltage and current measurements on a commercially available HID lamp during hot and cold re-ignition are presented.",

author = "{van den Bos}, R.A.J.M. and A. Sobota and F. Manders and G.M.W. Kroesen",

year = "2013",

doi = "10.1063/1.4801850",

language = "English",

volume = "84",

pages = "046103--1/3",

journal = "Review of Scientific Instruments",

issn = "0034-6748",

publisher = "American Institute of Physics",

}

Note : measuring breakdown characteristics during the hot re-ignition of high intensity discharge lamps using high frequency alternating current voltage. / van den Bos, R.A.J.M.; Sobota, A.; Manders, F.; Kroesen, G.M.W.

In: Review of Scientific Instruments, Vol. 84, 046103, 2013, p. 046103-1/3.

Research output: Contribution to journal › Article › Academic › peer-review

TY - JOUR

T1 - Note : measuring breakdown characteristics during the hot re-ignition of high intensity discharge lamps using high frequency alternating current voltage

AU - van den Bos, R.A.J.M.

AU - Sobota, A.

AU - Manders, F.

AU - Kroesen, G.M.W.

PY - 2013

Y1 - 2013

N2 - To investigate the cold and hot re-ignition properties of High Intensity Discharge (HID) lamps in more detail an automated setup was designed in such a way that HID lamps of various sizes and under different background pressures can be tested. The HID lamps are ignited with a ramped sinusoidal voltage signal with frequencies between 60 and 220 kHz and with amplitude up to 7.5 kV. Some initial results of voltage and current measurements on a commercially available HID lamp during hot and cold re-ignition are presented.

AB - To investigate the cold and hot re-ignition properties of High Intensity Discharge (HID) lamps in more detail an automated setup was designed in such a way that HID lamps of various sizes and under different background pressures can be tested. The HID lamps are ignited with a ramped sinusoidal voltage signal with frequencies between 60 and 220 kHz and with amplitude up to 7.5 kV. Some initial results of voltage and current measurements on a commercially available HID lamp during hot and cold re-ignition are presented.

U2 - 10.1063/1.4801850

DO - 10.1063/1.4801850

M3 - Article

C2 - 23635237

VL - 84

SP - 046103-1/3

JO - Review of Scientific Instruments

JF - Review of Scientific Instruments

SN - 0034-6748

M1 - 046103

ER -