Key building blocks for millimeter-wave IC design in baseline CMOS

M.A.T. Sanduleanu; E. Alarcon; H.M. Cheema; M. Vidojkovic - Andjelovic; R. Mahmoudi; A.H.M. Roermund, van

doi:10.1007/978-1-4020-8263-4_13

Key building blocks for millimeter-wave IC design in baseline CMOS

M.A.T. Sanduleanu, E. Alarcon, H.M. Cheema, M. Vidojkovic - Andjelovic, R. Mahmoudi, A.H.M. Roermund, van

Integrated Circuits

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

2 Citations (Scopus)

Abstract

In this work, new receiver concepts and key building blocks, at circuit level, for future millimeter-wave wireless communications standards are introduced. Starting from passive and active devices, trade-offs between technology, performance and circuit choices of millimeter-wave RF front-end circuits are discussed. In particular, power consumption, noise and linearity trade-offs in low-noise amplifiers, mixers, frequency dividers and oscillators are considered. The concepts derived are applied to a large class of wireless communications standards that are broadband in nature at RF and/or require a broadband IF.

Original language	English
Title of host publication	Analog Circuit Design : Sensors, Actuators and Power Drivers; Integrated Power Amplifiers from Wireline to RF; Very High Frequency Front Ends
Editors	H. Casier, A.H.M. Roermund, van, M. Steyaert
Place of Publication	Berlin
Publisher	Springer
Pages	259-282
ISBN (Print)	978-1-402-08262-7
DOIs	https://doi.org/10.1007/978-1-4020-8263-4_13
Publication status	Published - 2008
Event	16th Workshop on Advances in Analog Circuit Design (AACD 2007) - Oostende, Belgium Duration: 27 Mar 2007 → 29 Mar 2007 Conference number: 16

Conference

Conference	16th Workshop on Advances in Analog Circuit Design (AACD 2007)
Abbreviated title	AACD 2007
Country/Territory	Belgium
City	Oostende
Period	27/03/07 → 29/03/07
Other	IEEE Advances in Analogue Circuit Design Workshop 2007

Access to Document

10.1007/978-1-4020-8263-4_13

Cite this

Sanduleanu, M. A. T., Alarcon, E., Cheema, H. M., Vidojkovic - Andjelovic, M., Mahmoudi, R., & Roermund, van, A. H. M. (2008). Key building blocks for millimeter-wave IC design in baseline CMOS. In H. Casier, A. H. M. Roermund, van, & M. Steyaert (Eds.), Analog Circuit Design : Sensors, Actuators and Power Drivers; Integrated Power Amplifiers from Wireline to RF; Very High Frequency Front Ends (pp. 259-282). Springer. https://doi.org/10.1007/978-1-4020-8263-4_13

@inproceedings{3aa51be3cca54ed1a5dc8e39df370de8,

title = "Key building blocks for millimeter-wave IC design in baseline CMOS",

abstract = "In this work, new receiver concepts and key building blocks, at circuit level, for future millimeter-wave wireless communications standards are introduced. Starting from passive and active devices, trade-offs between technology, performance and circuit choices of millimeter-wave RF front-end circuits are discussed. In particular, power consumption, noise and linearity trade-offs in low-noise amplifiers, mixers, frequency dividers and oscillators are considered. The concepts derived are applied to a large class of wireless communications standards that are broadband in nature at RF and/or require a broadband IF.",

author = "M.A.T. Sanduleanu and E. Alarcon and H.M. Cheema and {Vidojkovic - Andjelovic}, M. and R. Mahmoudi and {Roermund, van}, A.H.M.",

year = "2008",

doi = "10.1007/978-1-4020-8263-4_13",

language = "English",

isbn = "978-1-402-08262-7",

pages = "259--282",

editor = "H. Casier and {Roermund, van}, A.H.M. and M. Steyaert",

booktitle = "Analog Circuit Design : Sensors, Actuators and Power Drivers; Integrated Power Amplifiers from Wireline to RF; Very High Frequency Front Ends",

publisher = "Springer",

address = "Germany",

note = "16th Workshop on Advances in Analog Circuit Design (AACD 2007), AACD 2007 ; Conference date: 27-03-2007 Through 29-03-2007",

}

Sanduleanu, MAT, Alarcon, E, Cheema, HM, Vidojkovic - Andjelovic, M, Mahmoudi, R & Roermund, van, AHM 2008, Key building blocks for millimeter-wave IC design in baseline CMOS. in H Casier, AHM Roermund, van & M Steyaert (eds), Analog Circuit Design : Sensors, Actuators and Power Drivers; Integrated Power Amplifiers from Wireline to RF; Very High Frequency Front Ends. Springer, Berlin, pp. 259-282, 16th Workshop on Advances in Analog Circuit Design (AACD 2007), Oostende, Belgium, 27/03/07. https://doi.org/10.1007/978-1-4020-8263-4_13

Key building blocks for millimeter-wave IC design in baseline CMOS. / Sanduleanu, M.A.T.; Alarcon, E.; Cheema, H.M. et al.

Analog Circuit Design : Sensors, Actuators and Power Drivers; Integrated Power Amplifiers from Wireline to RF; Very High Frequency Front Ends. ed. / H. Casier; A.H.M. Roermund, van; M. Steyaert. Berlin : Springer, 2008. p. 259-282.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

TY - GEN

T1 - Key building blocks for millimeter-wave IC design in baseline CMOS

AU - Sanduleanu, M.A.T.

AU - Alarcon, E.

AU - Cheema, H.M.

AU - Vidojkovic - Andjelovic, M.

AU - Mahmoudi, R.

AU - Roermund, van, A.H.M.

N1 - Conference code: 16

PY - 2008

Y1 - 2008

N2 - In this work, new receiver concepts and key building blocks, at circuit level, for future millimeter-wave wireless communications standards are introduced. Starting from passive and active devices, trade-offs between technology, performance and circuit choices of millimeter-wave RF front-end circuits are discussed. In particular, power consumption, noise and linearity trade-offs in low-noise amplifiers, mixers, frequency dividers and oscillators are considered. The concepts derived are applied to a large class of wireless communications standards that are broadband in nature at RF and/or require a broadband IF.

AB - In this work, new receiver concepts and key building blocks, at circuit level, for future millimeter-wave wireless communications standards are introduced. Starting from passive and active devices, trade-offs between technology, performance and circuit choices of millimeter-wave RF front-end circuits are discussed. In particular, power consumption, noise and linearity trade-offs in low-noise amplifiers, mixers, frequency dividers and oscillators are considered. The concepts derived are applied to a large class of wireless communications standards that are broadband in nature at RF and/or require a broadband IF.

U2 - 10.1007/978-1-4020-8263-4_13

DO - 10.1007/978-1-4020-8263-4_13

M3 - Conference contribution

SN - 978-1-402-08262-7

SP - 259

EP - 282

BT - Analog Circuit Design : Sensors, Actuators and Power Drivers; Integrated Power Amplifiers from Wireline to RF; Very High Frequency Front Ends

A2 - Casier, H.

A2 - Roermund, van, A.H.M.

A2 - Steyaert, M.

PB - Springer

CY - Berlin

T2 - 16th Workshop on Advances in Analog Circuit Design (AACD 2007)

Y2 - 27 March 2007 through 29 March 2007

ER -

Sanduleanu MAT, Alarcon E, Cheema HM, Vidojkovic - Andjelovic M, Mahmoudi R, Roermund, van AHM. Key building blocks for millimeter-wave IC design in baseline CMOS. In Casier H, Roermund, van AHM, Steyaert M, editors, Analog Circuit Design : Sensors, Actuators and Power Drivers; Integrated Power Amplifiers from Wireline to RF; Very High Frequency Front Ends. Berlin: Springer. 2008. p. 259-282 doi: 10.1007/978-1-4020-8263-4_13

Key building blocks for millimeter-wave IC design in baseline CMOS

Abstract

Conference

Access to Document

Fingerprint

Cite this