Ion beam analysis at cryogenic temperatures for polymer light emitting diodes

L.J. IJzendoorn, van; M.P. Jong, de; F.J.J. Janssen; G.G. Andersson; J.M. Sturm; M.J.A. Voigt, de

doi:10.1016/S0168-583X(01)01005-9

Ion beam analysis at cryogenic temperatures for polymer light emitting diodes

L.J. IJzendoorn, van, M.P. Jong, de, F.J.J. Janssen, G.G. Andersson, J.M. Sturm, M.J.A. Voigt, de

Research output: Contribution to journal › Article › Academic › peer-review

Abstract

A review. The application of ion beam anal. on polymer light emitting diodes became possible by the development of a set-up which allows measurements at cryogenic temps. (10-30 K). The set-up is equipped with a sample holder which combines compatibility with a load-lock, necessary for introduction of samples under controlled conditions, and a good thermal contact. A no. of examples are reviewed in which interface stability and oxidn. effects in poly-LEDs are studied with Rutherford backscattering spectrometry and elastic recoil detection

Original language	English
Pages (from-to)	36-40
Journal	Nuclear Instruments and Methods in Physics Research. Section B: Beam Interactions with Materials and Atoms
Volume	188
Issue number	1-4
DOIs	https://doi.org/10.1016/S0168-583X(01)01005-9
Publication status	Published - 2002

Access to Document

10.1016/S0168-583X(01)01005-9

Cite this

IJzendoorn, van, L. J., Jong, de, M. P., Janssen, F. J. J., Andersson, G. G., Sturm, J. M., & Voigt, de, M. J. A. (2002). Ion beam analysis at cryogenic temperatures for polymer light emitting diodes. Nuclear Instruments and Methods in Physics Research. Section B: Beam Interactions with Materials and Atoms, 188(1-4), 36-40. https://doi.org/10.1016/S0168-583X(01)01005-9

@article{edc1a02460d54c028963412f09568b21,

title = "Ion beam analysis at cryogenic temperatures for polymer light emitting diodes",

abstract = "A review. The application of ion beam anal. on polymer light emitting diodes became possible by the development of a set-up which allows measurements at cryogenic temps. (10-30 K). The set-up is equipped with a sample holder which combines compatibility with a load-lock, necessary for introduction of samples under controlled conditions, and a good thermal contact. A no. of examples are reviewed in which interface stability and oxidn. effects in poly-LEDs are studied with Rutherford backscattering spectrometry and elastic recoil detection",

author = "{IJzendoorn, van}, L.J. and {Jong, de}, M.P. and F.J.J. Janssen and G.G. Andersson and J.M. Sturm and {Voigt, de}, M.J.A.",

year = "2002",

doi = "10.1016/S0168-583X(01)01005-9",

language = "English",

volume = "188",

pages = "36--40",

journal = "Nuclear Instruments and Methods in Physics Research. Section B: Beam Interactions with Materials and Atoms",

issn = "0168-583X",

publisher = "Elsevier",

number = "1-4",

}

Ion beam analysis at cryogenic temperatures for polymer light emitting diodes. / IJzendoorn, van, L.J.; Jong, de, M.P.; Janssen, F.J.J. et al.

In: Nuclear Instruments and Methods in Physics Research. Section B: Beam Interactions with Materials and Atoms, Vol. 188, No. 1-4, 2002, p. 36-40.

Research output: Contribution to journal › Article › Academic › peer-review

TY - JOUR

T1 - Ion beam analysis at cryogenic temperatures for polymer light emitting diodes

AU - IJzendoorn, van, L.J.

AU - Jong, de, M.P.

AU - Janssen, F.J.J.

AU - Andersson, G.G.

AU - Sturm, J.M.

AU - Voigt, de, M.J.A.

PY - 2002

Y1 - 2002

N2 - A review. The application of ion beam anal. on polymer light emitting diodes became possible by the development of a set-up which allows measurements at cryogenic temps. (10-30 K). The set-up is equipped with a sample holder which combines compatibility with a load-lock, necessary for introduction of samples under controlled conditions, and a good thermal contact. A no. of examples are reviewed in which interface stability and oxidn. effects in poly-LEDs are studied with Rutherford backscattering spectrometry and elastic recoil detection

AB - A review. The application of ion beam anal. on polymer light emitting diodes became possible by the development of a set-up which allows measurements at cryogenic temps. (10-30 K). The set-up is equipped with a sample holder which combines compatibility with a load-lock, necessary for introduction of samples under controlled conditions, and a good thermal contact. A no. of examples are reviewed in which interface stability and oxidn. effects in poly-LEDs are studied with Rutherford backscattering spectrometry and elastic recoil detection

U2 - 10.1016/S0168-583X(01)01005-9

DO - 10.1016/S0168-583X(01)01005-9

M3 - Article

VL - 188

SP - 36

EP - 40

JO - Nuclear Instruments and Methods in Physics Research. Section B: Beam Interactions with Materials and Atoms

JF - Nuclear Instruments and Methods in Physics Research. Section B: Beam Interactions with Materials and Atoms

SN - 0168-583X

IS - 1-4

ER -

Ion beam analysis at cryogenic temperatures for polymer light emitting diodes

Abstract

Access to Document

Fingerprint

Cite this