Investigation of winding topologies for flux switching machines

Y. Tang; T.E. Motoasca; J.J.H. Paulides; E. Lomonova

Investigation of winding topologies for flux switching machines

Y. Tang, T.E. Motoasca, J.J.H. Paulides, E. Lomonova

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

1 Downloads (Pure)

Abstract

This paper proposes a general method for calculating the winding factor of flux switching machines (FSMs) using the numbers of phases, stator slots and rotor teeth. With this method, winding factors of FSMs with different numbers of phases, stator slots and rotor teeth are obtained and compared. Based on the obtained winding factors, a novel design of flux switching machines with distributed windings is proposed and analyzed.

Original language	English
Title of host publication	Proceedings of the 15th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering, ISEF-2011, 1-3 September 2011, Funchal, Madeira
Publisher	ISEF
Pages	1-8
Publication status	Published - 2011

Cite this

@inproceedings{2c8a617b753849d1bf0c8ed6f53347b0,

title = "Investigation of winding topologies for flux switching machines",

abstract = "This paper proposes a general method for calculating the winding factor of flux switching machines (FSMs) using the numbers of phases, stator slots and rotor teeth. With this method, winding factors of FSMs with different numbers of phases, stator slots and rotor teeth are obtained and compared. Based on the obtained winding factors, a novel design of flux switching machines with distributed windings is proposed and analyzed.",

author = "Y. Tang and T.E. Motoasca and J.J.H. Paulides and E. Lomonova",

year = "2011",

language = "English",

pages = "1--8",

booktitle = "Proceedings of the 15th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering, ISEF-2011, 1-3 September 2011, Funchal, Madeira",

publisher = "ISEF",

}

Investigation of winding topologies for flux switching machines. / Tang, Y.; Motoasca, T.E.; Paulides, J.J.H. et al.
Proceedings of the 15th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering, ISEF-2011, 1-3 September 2011, Funchal, Madeira. ISEF, 2011. p. 1-8.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

TY - GEN

T1 - Investigation of winding topologies for flux switching machines

AU - Tang, Y.

AU - Motoasca, T.E.

AU - Paulides, J.J.H.

AU - Lomonova, E.

PY - 2011

Y1 - 2011

N2 - This paper proposes a general method for calculating the winding factor of flux switching machines (FSMs) using the numbers of phases, stator slots and rotor teeth. With this method, winding factors of FSMs with different numbers of phases, stator slots and rotor teeth are obtained and compared. Based on the obtained winding factors, a novel design of flux switching machines with distributed windings is proposed and analyzed.

AB - This paper proposes a general method for calculating the winding factor of flux switching machines (FSMs) using the numbers of phases, stator slots and rotor teeth. With this method, winding factors of FSMs with different numbers of phases, stator slots and rotor teeth are obtained and compared. Based on the obtained winding factors, a novel design of flux switching machines with distributed windings is proposed and analyzed.

M3 - Conference contribution

SP - 1

EP - 8

BT - Proceedings of the 15th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering, ISEF-2011, 1-3 September 2011, Funchal, Madeira

PB - ISEF

ER -

Investigation of winding topologies for flux switching machines

Abstract

Fingerprint

Cite this