Influence of RMS calculation methods on the measurement of voltage dips

G. Ye, V. Cuk, J.F.G. Cobben, W.L. Kling

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

1 Citation (Scopus)
4 Downloads (Pure)

Abstract

This paper presents the results of the analysis on the influence of different RMS calculation methods to the detection and characterization of voltage dips. The analytical calculation of measurement parameters for voltage dips and the systematic deviations in characterization due to the dip detection algorithms are discussed for the general RMS calculation methods, sliding window and half cycle methods. Stochastic processes are carried out with different fault types, fault locations and event occurring instants in a real medium voltage network, an evaluation study is presented with the statistic results.
Original languageEnglish
Title of host publicationProceedings of the 2014 49th International Universities Power Engineering Conference (UPEC), 2-5 September 2014, Cluj-Napoca
Place of PublicationPiscataway
PublisherInstitute of Electrical and Electronics Engineers
Pages1-6
ISBN (Print)978-1-4799-6556-4
DOIs
Publication statusPublished - 2014

Fingerprint

Electric potential
Electric fault location
Random processes
Statistics

Cite this

Ye, G., Cuk, V., Cobben, J. F. G., & Kling, W. L. (2014). Influence of RMS calculation methods on the measurement of voltage dips. In Proceedings of the 2014 49th International Universities Power Engineering Conference (UPEC), 2-5 September 2014, Cluj-Napoca (pp. 1-6). Piscataway: Institute of Electrical and Electronics Engineers. https://doi.org/10.1109/UPEC.2014.6934738
Ye, G. ; Cuk, V. ; Cobben, J.F.G. ; Kling, W.L. / Influence of RMS calculation methods on the measurement of voltage dips. Proceedings of the 2014 49th International Universities Power Engineering Conference (UPEC), 2-5 September 2014, Cluj-Napoca. Piscataway : Institute of Electrical and Electronics Engineers, 2014. pp. 1-6
@inproceedings{1954225adfa34e2288fdb2c042495122,
title = "Influence of RMS calculation methods on the measurement of voltage dips",
abstract = "This paper presents the results of the analysis on the influence of different RMS calculation methods to the detection and characterization of voltage dips. The analytical calculation of measurement parameters for voltage dips and the systematic deviations in characterization due to the dip detection algorithms are discussed for the general RMS calculation methods, sliding window and half cycle methods. Stochastic processes are carried out with different fault types, fault locations and event occurring instants in a real medium voltage network, an evaluation study is presented with the statistic results.",
author = "G. Ye and V. Cuk and J.F.G. Cobben and W.L. Kling",
year = "2014",
doi = "10.1109/UPEC.2014.6934738",
language = "English",
isbn = "978-1-4799-6556-4",
pages = "1--6",
booktitle = "Proceedings of the 2014 49th International Universities Power Engineering Conference (UPEC), 2-5 September 2014, Cluj-Napoca",
publisher = "Institute of Electrical and Electronics Engineers",
address = "United States",

}

Ye, G, Cuk, V, Cobben, JFG & Kling, WL 2014, Influence of RMS calculation methods on the measurement of voltage dips. in Proceedings of the 2014 49th International Universities Power Engineering Conference (UPEC), 2-5 September 2014, Cluj-Napoca. Institute of Electrical and Electronics Engineers, Piscataway, pp. 1-6. https://doi.org/10.1109/UPEC.2014.6934738

Influence of RMS calculation methods on the measurement of voltage dips. / Ye, G.; Cuk, V.; Cobben, J.F.G.; Kling, W.L.

Proceedings of the 2014 49th International Universities Power Engineering Conference (UPEC), 2-5 September 2014, Cluj-Napoca. Piscataway : Institute of Electrical and Electronics Engineers, 2014. p. 1-6.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

TY - GEN

T1 - Influence of RMS calculation methods on the measurement of voltage dips

AU - Ye, G.

AU - Cuk, V.

AU - Cobben, J.F.G.

AU - Kling, W.L.

PY - 2014

Y1 - 2014

N2 - This paper presents the results of the analysis on the influence of different RMS calculation methods to the detection and characterization of voltage dips. The analytical calculation of measurement parameters for voltage dips and the systematic deviations in characterization due to the dip detection algorithms are discussed for the general RMS calculation methods, sliding window and half cycle methods. Stochastic processes are carried out with different fault types, fault locations and event occurring instants in a real medium voltage network, an evaluation study is presented with the statistic results.

AB - This paper presents the results of the analysis on the influence of different RMS calculation methods to the detection and characterization of voltage dips. The analytical calculation of measurement parameters for voltage dips and the systematic deviations in characterization due to the dip detection algorithms are discussed for the general RMS calculation methods, sliding window and half cycle methods. Stochastic processes are carried out with different fault types, fault locations and event occurring instants in a real medium voltage network, an evaluation study is presented with the statistic results.

U2 - 10.1109/UPEC.2014.6934738

DO - 10.1109/UPEC.2014.6934738

M3 - Conference contribution

SN - 978-1-4799-6556-4

SP - 1

EP - 6

BT - Proceedings of the 2014 49th International Universities Power Engineering Conference (UPEC), 2-5 September 2014, Cluj-Napoca

PB - Institute of Electrical and Electronics Engineers

CY - Piscataway

ER -

Ye G, Cuk V, Cobben JFG, Kling WL. Influence of RMS calculation methods on the measurement of voltage dips. In Proceedings of the 2014 49th International Universities Power Engineering Conference (UPEC), 2-5 September 2014, Cluj-Napoca. Piscataway: Institute of Electrical and Electronics Engineers. 2014. p. 1-6 https://doi.org/10.1109/UPEC.2014.6934738