Impacts of modifications of standards on the power quality measurement results

S. Bhattacharyya; J.F.G. Cobben; W.L. Kling

doi:10.1109/ICHQP.2010.5625470

Impacts of modifications of standards on the power quality measurement results

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

2 Citations (Scopus)

253 Downloads (Pure)

Abstract

Power quality (PQ) standards are needed to achieve coordination between the characteristics of the quality of a network's power supply and the requirements of the end use equipments. The European standard EN50160 is a reference for the voltage supplied in medium and low voltage European grids. In the recent years, many discussions are done among regulators, network operators and industrial partners to improve this standard. In 2009, the last revision of this standard was approved and a number of modifications are given regarding the supply voltage related parameters. In this paper, a brief analysis is done to find out the implications of those changes to the existing network's voltage supply characteristics. Five years PQ measurement results of the Dutch networks are used as a reference case and are evaluated based on the new values given in the final draft of the EN50160 standard and the existing Dutch Grid Code.

Original language	English
Title of host publication	Proceedings of the 14th International Conference on Harmonics and Quality of Power (ICHQP 2010), 26-29 September 2010, Bergamo, Italy IEEE conference, Bergamo Italy
Place of Publication	Piscataway
Publisher	Institute of Electrical and Electronics Engineers
Pages	1-6
ISBN (Print)	978-1-4244-7245-1
DOIs	https://doi.org/10.1109/ICHQP.2010.5625470
Publication status	Published - 2010

Access to Document

10.1109/ICHQP.2010.5625470

Metis242783Final published version, 710 KB

Cite this

Bhattacharyya, S., Cobben, J. F. G., & Kling, W. L. (2010). Impacts of modifications of standards on the power quality measurement results. In Proceedings of the 14th International Conference on Harmonics and Quality of Power (ICHQP 2010), 26-29 September 2010, Bergamo, Italy IEEE conference, Bergamo Italy (pp. 1-6). Institute of Electrical and Electronics Engineers. https://doi.org/10.1109/ICHQP.2010.5625470

Bhattacharyya, S. ; Cobben, J.F.G. ; Kling, W.L. / Impacts of modifications of standards on the power quality measurement results. Proceedings of the 14th International Conference on Harmonics and Quality of Power (ICHQP 2010), 26-29 September 2010, Bergamo, Italy IEEE conference, Bergamo Italy. Piscataway : Institute of Electrical and Electronics Engineers, 2010. pp. 1-6

@inproceedings{cad5d0ae868e4430b7bdc97b71ef030f,

title = "Impacts of modifications of standards on the power quality measurement results",

abstract = "Power quality (PQ) standards are needed to achieve coordination between the characteristics of the quality of a network's power supply and the requirements of the end use equipments. The European standard EN50160 is a reference for the voltage supplied in medium and low voltage European grids. In the recent years, many discussions are done among regulators, network operators and industrial partners to improve this standard. In 2009, the last revision of this standard was approved and a number of modifications are given regarding the supply voltage related parameters. In this paper, a brief analysis is done to find out the implications of those changes to the existing network's voltage supply characteristics. Five years PQ measurement results of the Dutch networks are used as a reference case and are evaluated based on the new values given in the final draft of the EN50160 standard and the existing Dutch Grid Code.",

author = "S. Bhattacharyya and J.F.G. Cobben and W.L. Kling",

year = "2010",

doi = "10.1109/ICHQP.2010.5625470",

language = "English",

isbn = "978-1-4244-7245-1",

pages = "1--6",

booktitle = "Proceedings of the 14th International Conference on Harmonics and Quality of Power (ICHQP 2010), 26-29 September 2010, Bergamo, Italy IEEE conference, Bergamo Italy",

publisher = "Institute of Electrical and Electronics Engineers",

address = "United States",

}

Bhattacharyya, S , Cobben, JFG & Kling, WL 2010, Impacts of modifications of standards on the power quality measurement results. in Proceedings of the 14th International Conference on Harmonics and Quality of Power (ICHQP 2010), 26-29 September 2010, Bergamo, Italy IEEE conference, Bergamo Italy. Institute of Electrical and Electronics Engineers, Piscataway, pp. 1-6. https://doi.org/10.1109/ICHQP.2010.5625470

Impacts of modifications of standards on the power quality measurement results. / Bhattacharyya, S.; Cobben, J.F.G.; Kling, W.L.
Proceedings of the 14th International Conference on Harmonics and Quality of Power (ICHQP 2010), 26-29 September 2010, Bergamo, Italy IEEE conference, Bergamo Italy. Piscataway: Institute of Electrical and Electronics Engineers, 2010. p. 1-6.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

TY - GEN

T1 - Impacts of modifications of standards on the power quality measurement results

AU - Bhattacharyya, S.

AU - Cobben, J.F.G.

AU - Kling, W.L.

PY - 2010

Y1 - 2010

N2 - Power quality (PQ) standards are needed to achieve coordination between the characteristics of the quality of a network's power supply and the requirements of the end use equipments. The European standard EN50160 is a reference for the voltage supplied in medium and low voltage European grids. In the recent years, many discussions are done among regulators, network operators and industrial partners to improve this standard. In 2009, the last revision of this standard was approved and a number of modifications are given regarding the supply voltage related parameters. In this paper, a brief analysis is done to find out the implications of those changes to the existing network's voltage supply characteristics. Five years PQ measurement results of the Dutch networks are used as a reference case and are evaluated based on the new values given in the final draft of the EN50160 standard and the existing Dutch Grid Code.

AB - Power quality (PQ) standards are needed to achieve coordination between the characteristics of the quality of a network's power supply and the requirements of the end use equipments. The European standard EN50160 is a reference for the voltage supplied in medium and low voltage European grids. In the recent years, many discussions are done among regulators, network operators and industrial partners to improve this standard. In 2009, the last revision of this standard was approved and a number of modifications are given regarding the supply voltage related parameters. In this paper, a brief analysis is done to find out the implications of those changes to the existing network's voltage supply characteristics. Five years PQ measurement results of the Dutch networks are used as a reference case and are evaluated based on the new values given in the final draft of the EN50160 standard and the existing Dutch Grid Code.

U2 - 10.1109/ICHQP.2010.5625470

DO - 10.1109/ICHQP.2010.5625470

M3 - Conference contribution

SN - 978-1-4244-7245-1

SP - 1

EP - 6

BT - Proceedings of the 14th International Conference on Harmonics and Quality of Power (ICHQP 2010), 26-29 September 2010, Bergamo, Italy IEEE conference, Bergamo Italy

PB - Institute of Electrical and Electronics Engineers

CY - Piscataway

ER -

Bhattacharyya S , Cobben JFG, Kling WL. Impacts of modifications of standards on the power quality measurement results. In Proceedings of the 14th International Conference on Harmonics and Quality of Power (ICHQP 2010), 26-29 September 2010, Bergamo, Italy IEEE conference, Bergamo Italy. Piscataway: Institute of Electrical and Electronics Engineers. 2010. p. 1-6 doi: 10.1109/ICHQP.2010.5625470

Impacts of modifications of standards on the power quality measurement results

Abstract

Access to Document

Fingerprint

Cite this