Impact of Film Thickness and Thermal Treatment on the Excellent Surface Passivation of c-Si by ALD Al2O3 for Solar Cell Applications

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

78 Downloads (Pure)


The surface passivation of c-Si by atomic layer deposited (ALD) Al2O3 has recently gained considerable interest after extremely low surface recombination velocities (<10 cm/s) have been reported for low resistivity n- and p-type c-Si wafers [1]. The incorporation of an Al2O3 film for boron doped emitter passivation led to enhanced efficiencies of 23.2% for n-type c-Si solar cells [2]. From the cumulative research, various questions related to the thermal stability and other processing aspects of the Al2O3 films appeared. In this contribution we will show that a decrease of film thickness down to ~5 nm does not compromise the passivation quality, enabling a straightforward reduction of deposition time and providing freedom in the design of optimal front passivation/antireflection schemes. To activate the Al2O3 surface passivation a post-deposition anneal is required, but also the thermal budget during the plasma enhanced chemical vapor deposition of an a-SiNx:H capping layer was found sufficient to activate the passivation. Although an anneal effect can be observed in a large temperature range (~350 - ~600oC) the optimal post-deposition anneal temperature window was found to be much smaller. Within the optimum temperature range, the largest anneal effect was observed to take place during the first minutes of the process. For the successful implementation of Al2O3 in conventional screen printed solar cells, thermal stability is required. In this paper we demonstrate the relative stability of Al2O3 and Al2O3/a-SiNx:H passivation/antireflection stacks against an industrial "firing" process reaching temperatures > 800oC. Although the minority carrier lifetime was found to decrease during the firing process, values in excess of 1 ms were obtained on 2 O cm n-Si wafers after firing. These lifetimes suggest that surface recombination will not likely be the efficiency limiting step for solar cells that combine Al2O3 passivation and screen printed metallization as recombination in the metalized area will be dominant. The findings in this paper demonstrate the suitability of thin ALD-synthesised Al2O3 passivation films for large scale photovoltaic applications. [1] B. Hoex, J. Schmidt, P. Pohl, M. C. M. van de Sanden, and W. M. M. Kessels, J. Appl. Phys. 104, 044903 2008 [2] J. Bennick, B. Hoex, M.C.M. van de Sanden, W.M.M. Kessels, O. Schultz, S. Glunz, Appl. Phys. Lett. 92, 253504 (2008)
Original languageEnglish
Title of host publicationProceedings of the 56th international American Vacuum Society Symposium & Exhibition (AVS 56) 8-13 November 2009, San Jose, California
Place of PublicationNew York, NY
Publication statusPublished - 2009
Eventconference; Thins Film : Energy Applications and Scaling -
Duration: 1 Jan 2009 → …


Conferenceconference; Thins Film : Energy Applications and Scaling
Period1/01/09 → …
OtherThins Film : Energy Applications and Scaling


Dive into the research topics of 'Impact of Film Thickness and Thermal Treatment on the Excellent Surface Passivation of c-Si by ALD Al2O3 for Solar Cell Applications'. Together they form a unique fingerprint.

Cite this