High performance passive solar heating system with heat pipe energy transfer

M. H. de Wit; J. L.M. Hensen; H. A.L. van Dijk; G. J. van den Brink; E. van Galen

doi:10.1007/978-94-009-6508-9_65

High performance passive solar heating system with heat pipe energy transfer

M. H. de Wit
, J. L.M. Hensen
, H. A.L. van Dijk
, G. J. van den Brink
, E. van Galen

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

2 Citations (Scopus)

2 Downloads (Pure)

Abstract

The aim of this project was to develop a passive solar heating system with a higher efficiency than concrete thermal storage walls and with restricted extra costs for manufacturing the system. This is to be achieved by three special components: 1) a heat pipe as a thermal diode tube for efficient transfer of collected solar heat from the absorber to the back of an insulation layer; 2) a heat storage section with water or a phase change material; and 3) an extra insulation sheet with vents between the storage and the room for controlled transfer of heat into the room.

Original language	English
Title of host publication	1st E.C. Conference on Solar Heating
Editors	C. Ouden, den
Place of Publication	Dordrecht
Publisher	Reidel
Pages	367-372
Number of pages	6
ISBN (Print)	90-277-1875-X
DOIs	https://doi.org/10.1007/978-94-009-6508-9_65
Publication status	Published - 1 Dec 1984
Event	Solar heating : international conference held at Amsterdam - Amsterdam, Netherlands Duration: 30 Apr 1984 → 4 May 1984

Conference

Conference	Solar heating : international conference held at Amsterdam
Country/Territory	Netherlands
City	Amsterdam
Period	30/04/84 → 4/05/84

Access to Document

10.1007/978-94-009-6508-9_65

Cite this

@inproceedings{7e5ee9041dd44482b12823ae55786ae7,

title = "High performance passive solar heating system with heat pipe energy transfer",

abstract = "The aim of this project was to develop a passive solar heating system with a higher efficiency than concrete thermal storage walls and with restricted extra costs for manufacturing the system. This is to be achieved by three special components: 1) a heat pipe as a thermal diode tube for efficient transfer of collected solar heat from the absorber to the back of an insulation layer; 2) a heat storage section with water or a phase change material; and 3) an extra insulation sheet with vents between the storage and the room for controlled transfer of heat into the room.",

author = "\{de Wit\}, \{M. H.\} and Hensen, \{J. L.M.\} and \{van Dijk\}, \{H. A.L.\} and \{van den Brink\}, \{G. J.\} and \{van Galen\}, E.",

year = "1984",

month = dec,

day = "1",

doi = "10.1007/978-94-009-6508-9\_65",

language = "English",

isbn = "90-277-1875-X",

pages = "367--372",

editor = "\{Ouden, den\}, C.",

booktitle = "1st E.C. Conference on Solar Heating",

publisher = "Reidel",

note = "Solar heating : international conference held at Amsterdam ; Conference date: 30-04-1984 Through 04-05-1984",

}

de Wit, MH, Hensen, JLM, van Dijk, HAL, van den Brink, GJ & van Galen, E 1984, High performance passive solar heating system with heat pipe energy transfer. in C Ouden, den (ed.), 1st E.C. Conference on Solar Heating. Reidel, Dordrecht, pp. 367-372, Solar heating : international conference held at Amsterdam, Amsterdam, Netherlands, 30/04/84. https://doi.org/10.1007/978-94-009-6508-9_65

TY - GEN

T1 - High performance passive solar heating system with heat pipe energy transfer

AU - de Wit, M. H.

AU - Hensen, J. L.M.

AU - van Dijk, H. A.L.

AU - van den Brink, G. J.

AU - van Galen, E.

PY - 1984/12/1

Y1 - 1984/12/1

N2 - The aim of this project was to develop a passive solar heating system with a higher efficiency than concrete thermal storage walls and with restricted extra costs for manufacturing the system. This is to be achieved by three special components: 1) a heat pipe as a thermal diode tube for efficient transfer of collected solar heat from the absorber to the back of an insulation layer; 2) a heat storage section with water or a phase change material; and 3) an extra insulation sheet with vents between the storage and the room for controlled transfer of heat into the room.

AB - The aim of this project was to develop a passive solar heating system with a higher efficiency than concrete thermal storage walls and with restricted extra costs for manufacturing the system. This is to be achieved by three special components: 1) a heat pipe as a thermal diode tube for efficient transfer of collected solar heat from the absorber to the back of an insulation layer; 2) a heat storage section with water or a phase change material; and 3) an extra insulation sheet with vents between the storage and the room for controlled transfer of heat into the room.

UR - https://www.scopus.com/pages/publications/0021638733

U2 - 10.1007/978-94-009-6508-9_65

DO - 10.1007/978-94-009-6508-9_65

M3 - Conference contribution

SN - 90-277-1875-X

SP - 367

EP - 372

BT - 1st E.C. Conference on Solar Heating

A2 - Ouden, den, C.

PB - Reidel

CY - Dordrecht

T2 - Solar heating : international conference held at Amsterdam

Y2 - 30 April 1984 through 4 May 1984

ER -

High performance passive solar heating system with heat pipe energy transfer

Abstract

Conference

Access to Document

Other files and links

Fingerprint

Cite this