Force and torque errors in planar actuators due to manufacturing tolerances

J.M.M. Rovers; J.W. Jansen; E. Lomonova

doi:10.1109/TMAG.2012.2200464

Force and torque errors in planar actuators due to manufacturing tolerances

J.M.M. Rovers, J.W. Jansen, E. Lomonova

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

9 Citations (Scopus)

12 Downloads (Pure)

Abstract

This paper discusses the force and torque errors in moving-magnet planar actuators due to manufacturing tolerances. Two different planar actuator topologies are under consideration, and errors due to variations in the magnetization vector, the magnet positions, and the coil positions are evaluated by Monte-Carlo simulations. The effect of these force and torque errors on the positioning accuracy of the planar actuators are estimated from the process sensitivity transfer of a suitable controller.

Original language	English
Title of host publication	Proceedings of the IEEE International Magnetics Conference (INTERMAG 2012), 7th-11th of May 2012, Vancouver, Canada
Place of Publication	Piscataway, NJ
Publisher	Institute of Electrical and Electronics Engineers
Pages	3116-3119
DOIs	https://doi.org/10.1109/TMAG.2012.2200464
Publication status	Published - 2012
Event	2012 IEEE International Magnetics Conference (INTERMAG 2012) - Vancouver, Canada Duration: 7 May 2012 → 11 May 2012 http://www.2012.intermagconference.com/

Publication series

Name	IEEE Transactions on Magnetics
Volume	48
ISSN (Print)	0018-9464

Conference

Conference	2012 IEEE International Magnetics Conference (INTERMAG 2012)
Abbreviated title	INTERMAG 2012
Country/Territory	Canada
City	Vancouver
Period	7/05/12 → 11/05/12
Internet address	http://www.2012.intermagconference.com/

Access to Document

10.1109/TMAG.2012.2200464

Cite this

Rovers, J. M. M., Jansen, J. W., & Lomonova, E. (2012). Force and torque errors in planar actuators due to manufacturing tolerances. In Proceedings of the IEEE International Magnetics Conference (INTERMAG 2012), 7th-11th of May 2012, Vancouver, Canada (pp. 3116-3119). (IEEE Transactions on Magnetics; Vol. 48). Institute of Electrical and Electronics Engineers. https://doi.org/10.1109/TMAG.2012.2200464

@inproceedings{14f061bc7cb941319375ef5c182db15d,

title = "Force and torque errors in planar actuators due to manufacturing tolerances",

abstract = "This paper discusses the force and torque errors in moving-magnet planar actuators due to manufacturing tolerances. Two different planar actuator topologies are under consideration, and errors due to variations in the magnetization vector, the magnet positions, and the coil positions are evaluated by Monte-Carlo simulations. The effect of these force and torque errors on the positioning accuracy of the planar actuators are estimated from the process sensitivity transfer of a suitable controller.",

author = "J.M.M. Rovers and J.W. Jansen and E. Lomonova",

year = "2012",

doi = "10.1109/TMAG.2012.2200464",

language = "English",

series = "IEEE Transactions on Magnetics",

publisher = "Institute of Electrical and Electronics Engineers",

pages = "3116--3119",

booktitle = "Proceedings of the IEEE International Magnetics Conference (INTERMAG 2012), 7th-11th of May 2012, Vancouver, Canada",

address = "United States",

note = "2012 IEEE International Magnetics Conference (INTERMAG 2012), INTERMAG 2012 ; Conference date: 07-05-2012 Through 11-05-2012",

url = "http://www.2012.intermagconference.com/",

}

Rovers, JMM, Jansen, JW & Lomonova, E 2012, Force and torque errors in planar actuators due to manufacturing tolerances. in Proceedings of the IEEE International Magnetics Conference (INTERMAG 2012), 7th-11th of May 2012, Vancouver, Canada. IEEE Transactions on Magnetics, vol. 48, Institute of Electrical and Electronics Engineers, Piscataway, NJ, pp. 3116-3119, 2012 IEEE International Magnetics Conference (INTERMAG 2012), Vancouver, Canada, 7/05/12. https://doi.org/10.1109/TMAG.2012.2200464

Force and torque errors in planar actuators due to manufacturing tolerances. / Rovers, J.M.M.; Jansen, J.W.; Lomonova, E.
Proceedings of the IEEE International Magnetics Conference (INTERMAG 2012), 7th-11th of May 2012, Vancouver, Canada. Piscataway, NJ: Institute of Electrical and Electronics Engineers, 2012. p. 3116-3119 (IEEE Transactions on Magnetics; Vol. 48).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

TY - GEN

T1 - Force and torque errors in planar actuators due to manufacturing tolerances

AU - Rovers, J.M.M.

AU - Jansen, J.W.

AU - Lomonova, E.

PY - 2012

Y1 - 2012

N2 - This paper discusses the force and torque errors in moving-magnet planar actuators due to manufacturing tolerances. Two different planar actuator topologies are under consideration, and errors due to variations in the magnetization vector, the magnet positions, and the coil positions are evaluated by Monte-Carlo simulations. The effect of these force and torque errors on the positioning accuracy of the planar actuators are estimated from the process sensitivity transfer of a suitable controller.

AB - This paper discusses the force and torque errors in moving-magnet planar actuators due to manufacturing tolerances. Two different planar actuator topologies are under consideration, and errors due to variations in the magnetization vector, the magnet positions, and the coil positions are evaluated by Monte-Carlo simulations. The effect of these force and torque errors on the positioning accuracy of the planar actuators are estimated from the process sensitivity transfer of a suitable controller.

U2 - 10.1109/TMAG.2012.2200464

DO - 10.1109/TMAG.2012.2200464

M3 - Conference contribution

T3 - IEEE Transactions on Magnetics

SP - 3116

EP - 3119

BT - Proceedings of the IEEE International Magnetics Conference (INTERMAG 2012), 7th-11th of May 2012, Vancouver, Canada

PB - Institute of Electrical and Electronics Engineers

CY - Piscataway, NJ

T2 - 2012 IEEE International Magnetics Conference (INTERMAG 2012)

Y2 - 7 May 2012 through 11 May 2012

ER -

Rovers JMM, Jansen JW , Lomonova E. Force and torque errors in planar actuators due to manufacturing tolerances. In Proceedings of the IEEE International Magnetics Conference (INTERMAG 2012), 7th-11th of May 2012, Vancouver, Canada. Piscataway, NJ: Institute of Electrical and Electronics Engineers. 2012. p. 3116-3119. (IEEE Transactions on Magnetics). doi: 10.1109/TMAG.2012.2200464

Force and torque errors in planar actuators due to manufacturing tolerances

Abstract

Publication series

Conference

Access to Document

Fingerprint

Cite this