Finite element modeling of the 1-D piezoceramic ultrasound array inter-element cross-coupling

M. State; L. Ledoux; F.N. Vosse, van de

doi:10.1109/ISAF.2008.4693874

Finite element modeling of the 1-D piezoceramic ultrasound array inter-element cross-coupling

M. State, L. Ledoux, F.N. Vosse, van de

Cardiovascular Biomechanics

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

Abstract

sponsible for undesired behavior in radiation field patterns and electroacoustic response of the ultrasound transducers for medical imaging. This undesired behavior is ultimately impairing the end echographic image quality [1,2]. The aim of our research is to study the influence of the dicing depth, for given kerf material properties, on the cross-coupling dB level. Mechanical cross-coupling was analyzed in the case of a 1-D ultrasound transducer using finite element modeling (FEM). The results were compared with experiments that were based on impedance analysis, laser interferometry and hydrophone measurements.

Original language	English
Title of host publication	ISAF 2008 17th IEEE international symposium on the Applications of Ferroelectrics
Place of Publication	United States, Santa Re
Pages	159-160
DOIs	https://doi.org/10.1109/ISAF.2008.4693874
Publication status	Published - 2008

Access to Document

10.1109/ISAF.2008.4693874

Cite this

@inproceedings{a613b1cfe1454d1cb69316468a30f60b,

title = "Finite element modeling of the 1-D piezoceramic ultrasound array inter-element cross-coupling",

abstract = "sponsible for undesired behavior in radiation field patterns and electroacoustic response of the ultrasound transducers for medical imaging. This undesired behavior is ultimately impairing the end echographic image quality [1,2]. The aim of our research is to study the influence of the dicing depth, for given kerf material properties, on the cross-coupling dB level. Mechanical cross-coupling was analyzed in the case of a 1-D ultrasound transducer using finite element modeling (FEM). The results were compared with experiments that were based on impedance analysis, laser interferometry and hydrophone measurements.",

author = "M. State and L. Ledoux and {Vosse, van de}, F.N.",

year = "2008",

doi = "10.1109/ISAF.2008.4693874",

language = "English",

isbn = "978-1-4244-2744-4",

pages = "159--160",

booktitle = "ISAF 2008 17th IEEE international symposium on the Applications of Ferroelectrics",

}

Finite element modeling of the 1-D piezoceramic ultrasound array inter-element cross-coupling. / State, M.; Ledoux, L.; Vosse, van de, F.N.
ISAF 2008 17th IEEE international symposium on the Applications of Ferroelectrics. United States, Santa Re, 2008. p. 159-160.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

TY - GEN

T1 - Finite element modeling of the 1-D piezoceramic ultrasound array inter-element cross-coupling

AU - State, M.

AU - Ledoux, L.

AU - Vosse, van de, F.N.

PY - 2008

Y1 - 2008

N2 - sponsible for undesired behavior in radiation field patterns and electroacoustic response of the ultrasound transducers for medical imaging. This undesired behavior is ultimately impairing the end echographic image quality [1,2]. The aim of our research is to study the influence of the dicing depth, for given kerf material properties, on the cross-coupling dB level. Mechanical cross-coupling was analyzed in the case of a 1-D ultrasound transducer using finite element modeling (FEM). The results were compared with experiments that were based on impedance analysis, laser interferometry and hydrophone measurements.

AB - sponsible for undesired behavior in radiation field patterns and electroacoustic response of the ultrasound transducers for medical imaging. This undesired behavior is ultimately impairing the end echographic image quality [1,2]. The aim of our research is to study the influence of the dicing depth, for given kerf material properties, on the cross-coupling dB level. Mechanical cross-coupling was analyzed in the case of a 1-D ultrasound transducer using finite element modeling (FEM). The results were compared with experiments that were based on impedance analysis, laser interferometry and hydrophone measurements.

U2 - 10.1109/ISAF.2008.4693874

DO - 10.1109/ISAF.2008.4693874

M3 - Conference contribution

SN - 978-1-4244-2744-4

SP - 159

EP - 160

BT - ISAF 2008 17th IEEE international symposium on the Applications of Ferroelectrics

CY - United States, Santa Re

ER -

Finite element modeling of the 1-D piezoceramic ultrasound array inter-element cross-coupling

Abstract

Access to Document

Fingerprint

Cite this