Experimental study on CO₂ separation using hydrophobic deep eutectic solvent based supported liquid membranes

Deep eutectic solvents (DESs) have been proposed as a viable and more sustainable solvent for CO₂ capture, owing to their low volatility and tunable properties. In this work, polymer membranes were combined with hydrophobic DESs to prepare supported liquid membranes (DES-SLMs), and the potential of using SLMs for CO₂/N₂ separation was investigated. COSMO-RS model simulations, bond energy analysis as well as stability tests were used to select the polymeric porous support. Hydrophobic polyvinylidene fluoride (PVDF) with a nominal pore size of 0.1 μm was chosen to support three selected hydrophobic DESs. The gas permeabilities through three selected DES-SLMs were experimentally determined, where the thymol-coumarin (1:1) based SLM showed the best performance with a CO₂ permeability of 175.0 Barrer and selectivity of 30.2 at room temperature. The separation capability was further improved by mixing the DES with traditional physical absorbents. In addition, the effects of water presence in the gas phase on the DES-SLM were investigated. The membrane was physically stable, but the ideal selectivity of CO₂/N₂ through the membrane deteriorated with time on steam. By predicting the permeabilities of CO₂ and N₂ through traditional organic liquid based SLMs, the prospects of developing DESs for SLM applications were demonstrated. Finally, an advanced membrane capture process for a natural gas-fired combined cycle (NGCC) power plant was studied with process simulation and economic analysis, where the SLMs are used to purify the CO₂ product.