Experimental evaluation of the stability and mechanical behavior of contacts in Silicon Carbide for the design of the basic angle monitoring system of GAIA

A.A. Veggel, van, W.J. Berkhout, M.K. Schalkx, A.A. Wielders, P.C.J.N. Rosielle, H. Nijmeijer

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

50 Downloads (Pure)

Abstract

The satellite GAIA will be launched in ca. 2010 to make a 3-D map of our Galaxy. The payload module of the satellite will carry two astrometric telescopes amongst other instrumentation. The optical bench and astrometric telescopes will be constructed for a large part in Silicon Carbide (SiC). A truss structure concept design was developed, which could serve as optical bench for the scientific instrumentation of GAIA. It is lightweight and has a first eigenfrequency of 80 Hz. Also a concept design has been developed for the Basic Angle Monitoring (BAM) system of GAIA, which will measure 1 micro-arcsecond (ƒÝas) variations of the angle between the lines-of-sight of the two telescopes. For the design of these systems, contact mechanics is an important issue and therefore experiments have been conducted to obtain practical experience of the contact behaviour of SiC. This knowledge will be used in our project for a design of the BAM system. These experiments consist of friction experiments and experiments in which SiC tubes are bonded with several techniques like bolting, brazing and gluing.
Original languageEnglish
Title of host publicationProceedings of the European conference on spacecraft structures, materials and mechanical testing 2005, 10-12 may 2005, Noordwijk, The Netherlands
Place of PublicationNetherlands, Noordwijk
Pagespaper-158
Publication statusPublished - 2005

Fingerprint

Dive into the research topics of 'Experimental evaluation of the stability and mechanical behavior of contacts in Silicon Carbide for the design of the basic angle monitoring system of GAIA'. Together they form a unique fingerprint.

Cite this