Edge strength model for structural glass based on the mirror zone depth

M. Vandebroek, C. Louter, R. Caspeele, F. Ensslen, J.L.I.F. Belis

    Research output: Contribution to journalArticleAcademicpeer-review

    2 Citations (Scopus)

    Abstract

    A reliable assessment of the edge strength becomes an important issue when designing structural glass elements in buildings. However, in the literature the edge strength of glass, dependent on the edge quality, is not well documented. Therefore, in this study an edge strength model was established and validated for commonly used edge finishings, namely ground, arrissed and cut. After testing at a high stress rate, the fracture mirror zone depth and the flaw depth were measured. For every edge finishing a reliable ratio between the fracture mirror zone depth and the initial flaw depth was found. A strength model based on the measurement of the mirror zone depth was established and validated, as the measurement of the mirror zone is much easier than the measurement of the flaw depth. Also, the mirror zone depth is independent of the loading rate and can be useful for forensic engineering.
    Original languageEnglish
    Pages (from-to)457-468
    JournalProceedings of the Institution of Civil Engineers - Structures and Buildings
    Volume168
    Issue number7
    DOIs
    Publication statusPublished - Jul 2015

    Keywords

    • corrosion
    • fatigue
    • strength and testing of materials

    Fingerprint

    Dive into the research topics of 'Edge strength model for structural glass based on the mirror zone depth'. Together they form a unique fingerprint.

    Cite this