Discrete bubble modeling for a micro-structured bubble column

D. Jain, Y.M. Lau, J.A.M. Kuipers, N.G. Deen

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

16 Citations (Scopus)

Abstract

Gas–liquid flows with solid catalyst particles are encountered in many applications in the chemical, petrochemical, pharmaceutical industries, etc. Most commonly, two reactor types are applied for large scale in the industry. They are slurry bubble column and trickle bed reactors. Both of these types of reactors have some disadvantages limiting their efficiencies. To overcome these disadvantages, a novel reactor type, micro-structured bubble column (MSBC), is proposed. In the MSBC, the micro-structuring of catalytic material is realized by introducing a static mesh of thin wires coated with catalyst inside the column. Wires also serve the purpose of cutting the bubbles, which in turn results in high interfacial area and enhanced interface dynamics. The static catalytic mesh also ensures lower cost by avoiding filtration of catalyst particles. Numerical formulation of the described reactor is based on the 3-D discrete bubble model (DBM) presented in the previous works of Darmana et al., 2005 and Darmana et al., 2007. The extended version of DBM presented here introduces wires in the existing model and studies their effect on liquid and bubble dynamics. Bubbles and wires are represented by spherical and cylindrical markers, respectively; and the liquid flow-field is solved in the Eulerian gird cells. An improved drag correlation for bubbles in dense (up to 50%) swarm flow is also incorporated in the model. The model implementation and results are verified for a wide spectrum of parameters from the data available from the previous studies, analytical results and experimental findings. Our results show that the model is able to predict the hydrodynamic behavior and bubble dynamics, including the cutting of bubbles through wire mesh, very well.
LanguageEnglish
Title of host publicationProceedings 11th International Conference on Gas-Liquid & Gas-Liquid-Solid Reactor Engineering, 19-22 August 2013, Seoul, South Korea
PagesH-5-
StatePublished - 2013

Fingerprint

Bubble columns
Bubbles (in fluids)
Wire
Catalysts
Liquids
Petrochemicals
Drug products
Drag
Industry
Flow fields
Hydrodynamics
Gases
Costs

Cite this

Jain, D., Lau, Y. M., Kuipers, J. A. M., & Deen, N. G. (2013). Discrete bubble modeling for a micro-structured bubble column. In Proceedings 11th International Conference on Gas-Liquid & Gas-Liquid-Solid Reactor Engineering, 19-22 August 2013, Seoul, South Korea (pp. H-5-)
Jain, D. ; Lau, Y.M. ; Kuipers, J.A.M. ; Deen, N.G./ Discrete bubble modeling for a micro-structured bubble column. Proceedings 11th International Conference on Gas-Liquid & Gas-Liquid-Solid Reactor Engineering, 19-22 August 2013, Seoul, South Korea. 2013. pp. H-5-
@inproceedings{33c6eb031be94e4395e00bf91c0fee14,
title = "Discrete bubble modeling for a micro-structured bubble column",
abstract = "Gas–liquid flows with solid catalyst particles are encountered in many applications in the chemical, petrochemical, pharmaceutical industries, etc. Most commonly, two reactor types are applied for large scale in the industry. They are slurry bubble column and trickle bed reactors. Both of these types of reactors have some disadvantages limiting their efficiencies. To overcome these disadvantages, a novel reactor type, micro-structured bubble column (MSBC), is proposed. In the MSBC, the micro-structuring of catalytic material is realized by introducing a static mesh of thin wires coated with catalyst inside the column. Wires also serve the purpose of cutting the bubbles, which in turn results in high interfacial area and enhanced interface dynamics. The static catalytic mesh also ensures lower cost by avoiding filtration of catalyst particles. Numerical formulation of the described reactor is based on the 3-D discrete bubble model (DBM) presented in the previous works of Darmana et al., 2005 and Darmana et al., 2007. The extended version of DBM presented here introduces wires in the existing model and studies their effect on liquid and bubble dynamics. Bubbles and wires are represented by spherical and cylindrical markers, respectively; and the liquid flow-field is solved in the Eulerian gird cells. An improved drag correlation for bubbles in dense (up to 50{\%}) swarm flow is also incorporated in the model. The model implementation and results are verified for a wide spectrum of parameters from the data available from the previous studies, analytical results and experimental findings. Our results show that the model is able to predict the hydrodynamic behavior and bubble dynamics, including the cutting of bubbles through wire mesh, very well.",
author = "D. Jain and Y.M. Lau and J.A.M. Kuipers and N.G. Deen",
year = "2013",
language = "English",
pages = "H--5--",
booktitle = "Proceedings 11th International Conference on Gas-Liquid & Gas-Liquid-Solid Reactor Engineering, 19-22 August 2013, Seoul, South Korea",

}

Jain, D, Lau, YM, Kuipers, JAM & Deen, NG 2013, Discrete bubble modeling for a micro-structured bubble column. in Proceedings 11th International Conference on Gas-Liquid & Gas-Liquid-Solid Reactor Engineering, 19-22 August 2013, Seoul, South Korea. pp. H-5-.

Discrete bubble modeling for a micro-structured bubble column. / Jain, D.; Lau, Y.M.; Kuipers, J.A.M.; Deen, N.G.

Proceedings 11th International Conference on Gas-Liquid & Gas-Liquid-Solid Reactor Engineering, 19-22 August 2013, Seoul, South Korea. 2013. p. H-5-.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

TY - GEN

T1 - Discrete bubble modeling for a micro-structured bubble column

AU - Jain,D.

AU - Lau,Y.M.

AU - Kuipers,J.A.M.

AU - Deen,N.G.

PY - 2013

Y1 - 2013

N2 - Gas–liquid flows with solid catalyst particles are encountered in many applications in the chemical, petrochemical, pharmaceutical industries, etc. Most commonly, two reactor types are applied for large scale in the industry. They are slurry bubble column and trickle bed reactors. Both of these types of reactors have some disadvantages limiting their efficiencies. To overcome these disadvantages, a novel reactor type, micro-structured bubble column (MSBC), is proposed. In the MSBC, the micro-structuring of catalytic material is realized by introducing a static mesh of thin wires coated with catalyst inside the column. Wires also serve the purpose of cutting the bubbles, which in turn results in high interfacial area and enhanced interface dynamics. The static catalytic mesh also ensures lower cost by avoiding filtration of catalyst particles. Numerical formulation of the described reactor is based on the 3-D discrete bubble model (DBM) presented in the previous works of Darmana et al., 2005 and Darmana et al., 2007. The extended version of DBM presented here introduces wires in the existing model and studies their effect on liquid and bubble dynamics. Bubbles and wires are represented by spherical and cylindrical markers, respectively; and the liquid flow-field is solved in the Eulerian gird cells. An improved drag correlation for bubbles in dense (up to 50%) swarm flow is also incorporated in the model. The model implementation and results are verified for a wide spectrum of parameters from the data available from the previous studies, analytical results and experimental findings. Our results show that the model is able to predict the hydrodynamic behavior and bubble dynamics, including the cutting of bubbles through wire mesh, very well.

AB - Gas–liquid flows with solid catalyst particles are encountered in many applications in the chemical, petrochemical, pharmaceutical industries, etc. Most commonly, two reactor types are applied for large scale in the industry. They are slurry bubble column and trickle bed reactors. Both of these types of reactors have some disadvantages limiting their efficiencies. To overcome these disadvantages, a novel reactor type, micro-structured bubble column (MSBC), is proposed. In the MSBC, the micro-structuring of catalytic material is realized by introducing a static mesh of thin wires coated with catalyst inside the column. Wires also serve the purpose of cutting the bubbles, which in turn results in high interfacial area and enhanced interface dynamics. The static catalytic mesh also ensures lower cost by avoiding filtration of catalyst particles. Numerical formulation of the described reactor is based on the 3-D discrete bubble model (DBM) presented in the previous works of Darmana et al., 2005 and Darmana et al., 2007. The extended version of DBM presented here introduces wires in the existing model and studies their effect on liquid and bubble dynamics. Bubbles and wires are represented by spherical and cylindrical markers, respectively; and the liquid flow-field is solved in the Eulerian gird cells. An improved drag correlation for bubbles in dense (up to 50%) swarm flow is also incorporated in the model. The model implementation and results are verified for a wide spectrum of parameters from the data available from the previous studies, analytical results and experimental findings. Our results show that the model is able to predict the hydrodynamic behavior and bubble dynamics, including the cutting of bubbles through wire mesh, very well.

M3 - Conference contribution

SP - H-5-

BT - Proceedings 11th International Conference on Gas-Liquid & Gas-Liquid-Solid Reactor Engineering, 19-22 August 2013, Seoul, South Korea

ER -

Jain D, Lau YM, Kuipers JAM, Deen NG. Discrete bubble modeling for a micro-structured bubble column. In Proceedings 11th International Conference on Gas-Liquid & Gas-Liquid-Solid Reactor Engineering, 19-22 August 2013, Seoul, South Korea. 2013. p. H-5-.