DESIGN OF FIBRE-POLYMER COMPOSITE STRUCTURES (CEN/TS 19101): SERVICEABILITY LIMIT STATES AND CREEP RUPTURE

José Sena-Cruz; Mário Sá; João R. Correia; J. Toby Mottram; Thomas Keller; Marta Gil Pérez; Luigi Ascione; Liesbeth Tromp; Salvador Russo

doi:10.5281/zenodo.8066441

DESIGN OF FIBRE-POLYMER COMPOSITE STRUCTURES (CEN/TS 19101): SERVICEABILITY LIMIT STATES AND CREEP RUPTURE

José Sena-Cruz, Mário Sá, João R. Correia, J. Toby Mottram, Thomas Keller, Marta Gil Pérez, Luigi Ascione, Liesbeth Tromp, Salvador Russo

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

Abstract

In November 2022, the European Committee for Standardization (CEN) published the Technical Specification CEN/TS 19101:2022, “Design of Fibre-Polymer Composite Structures”, which is a milestone towards the widespread application of composite materials in civil engineering structures. This paper gives an overview of the clauses about serviceability limit states (SLS) and the creep rupture verification at ultimate limit state (ULS). The SLS criteria include deflections, vibrations and matrix cracking verifications, which should consider the effects of environmental conditions and creep effects. The creep rupture of composite members and components is prevented by limiting the magnitudes of sustained stresses, using relevant quasi-permanent combinations of actions.

Original language	English
Title of host publication	Proceedings of the 11th International Conference on Fiber-Reinforced Polymer (FRP) Composites in Civil Engineering (CICE 2023)
Publisher	Zenodo
DOIs	https://doi.org/10.5281/zenodo.8066441
Publication status	Published - 21 Jun 2023
Externally published	Yes
Event	11th International Conference on Fiber-Reinforced Polymer ,FRP Composites in Civil Engineering, CICE 2023 - Rio de Janeiro, Brazil Duration: 23 Jul 2023 → 26 Jul 2023

Conference

Conference	11th International Conference on Fiber-Reinforced Polymer ,FRP Composites in Civil Engineering, CICE 2023
Country/Territory	Brazil
City	Rio de Janeiro
Period	23/07/23 → 26/07/23

Bibliographical note

Publisher Copyright:
© CICE 2023 - 11th International Conference on FRP Composites in Civil Engineering. All rights reserved.

Keywords

Creep rupture
Design code
European Technical Specification
Fibre-polymer composites
Serviceability limit states

Access to Document

10.5281/zenodo.8066441Licence: CC BY

Cite this

Sena-Cruz, J., Sá, M., Correia, J. R., Mottram, J. T., Keller, T., Gil Pérez, M., Ascione, L., Tromp, L., & Russo, S. (2023). DESIGN OF FIBRE-POLYMER COMPOSITE STRUCTURES (CEN/TS 19101): SERVICEABILITY LIMIT STATES AND CREEP RUPTURE. In Proceedings of the 11th International Conference on Fiber-Reinforced Polymer (FRP) Composites in Civil Engineering (CICE 2023) Zenodo. https://doi.org/10.5281/zenodo.8066441

@inproceedings{50280c3bab0d465bbc631042b57fde55,

title = "DESIGN OF FIBRE-POLYMER COMPOSITE STRUCTURES (CEN/TS 19101): SERVICEABILITY LIMIT STATES AND CREEP RUPTURE",

abstract = "In November 2022, the European Committee for Standardization (CEN) published the Technical Specification CEN/TS 19101:2022, “Design of Fibre-Polymer Composite Structures”, which is a milestone towards the widespread application of composite materials in civil engineering structures. This paper gives an overview of the clauses about serviceability limit states (SLS) and the creep rupture verification at ultimate limit state (ULS). The SLS criteria include deflections, vibrations and matrix cracking verifications, which should consider the effects of environmental conditions and creep effects. The creep rupture of composite members and components is prevented by limiting the magnitudes of sustained stresses, using relevant quasi-permanent combinations of actions.",

keywords = "Creep rupture, Design code, European Technical Specification, Fibre-polymer composites, Serviceability limit states",

author = "Jos{\'e} Sena-Cruz and M{\'a}rio S{\'a} and Correia, {Jo{\~a}o R.} and Mottram, {J. Toby} and Thomas Keller and {Gil P{\'e}rez}, Marta and Luigi Ascione and Liesbeth Tromp and Salvador Russo",

note = "Publisher Copyright: {\textcopyright} CICE 2023 - 11th International Conference on FRP Composites in Civil Engineering. All rights reserved.; 11th International Conference on Fiber-Reinforced Polymer ,FRP Composites in Civil Engineering, CICE 2023 ; Conference date: 23-07-2023 Through 26-07-2023",

year = "2023",

month = jun,

day = "21",

doi = "10.5281/zenodo.8066441",

language = "English",

booktitle = "Proceedings of the 11th International Conference on Fiber-Reinforced Polymer (FRP) Composites in Civil Engineering (CICE 2023)",

publisher = "Zenodo",

}

Sena-Cruz, J, Sá, M, Correia, JR, Mottram, JT, Keller, T, Gil Pérez, M, Ascione, L, Tromp, L & Russo, S 2023, DESIGN OF FIBRE-POLYMER COMPOSITE STRUCTURES (CEN/TS 19101): SERVICEABILITY LIMIT STATES AND CREEP RUPTURE. in Proceedings of the 11th International Conference on Fiber-Reinforced Polymer (FRP) Composites in Civil Engineering (CICE 2023). Zenodo, 11th International Conference on Fiber-Reinforced Polymer ,FRP Composites in Civil Engineering, CICE 2023, Rio de Janeiro, Brazil, 23/07/23. https://doi.org/10.5281/zenodo.8066441

DESIGN OF FIBRE-POLYMER COMPOSITE STRUCTURES (CEN/TS 19101): SERVICEABILITY LIMIT STATES AND CREEP RUPTURE. / Sena-Cruz, José; Sá, Mário; Correia, João R. et al.
Proceedings of the 11th International Conference on Fiber-Reinforced Polymer (FRP) Composites in Civil Engineering (CICE 2023). Zenodo, 2023.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

TY - GEN

T1 - DESIGN OF FIBRE-POLYMER COMPOSITE STRUCTURES (CEN/TS 19101)

T2 - 11th International Conference on Fiber-Reinforced Polymer ,FRP Composites in Civil Engineering, CICE 2023

AU - Sena-Cruz, José

AU - Sá, Mário

AU - Correia, João R.

AU - Mottram, J. Toby

AU - Keller, Thomas

AU - Gil Pérez, Marta

AU - Ascione, Luigi

AU - Tromp, Liesbeth

AU - Russo, Salvador

PY - 2023/6/21

Y1 - 2023/6/21

N2 - In November 2022, the European Committee for Standardization (CEN) published the Technical Specification CEN/TS 19101:2022, “Design of Fibre-Polymer Composite Structures”, which is a milestone towards the widespread application of composite materials in civil engineering structures. This paper gives an overview of the clauses about serviceability limit states (SLS) and the creep rupture verification at ultimate limit state (ULS). The SLS criteria include deflections, vibrations and matrix cracking verifications, which should consider the effects of environmental conditions and creep effects. The creep rupture of composite members and components is prevented by limiting the magnitudes of sustained stresses, using relevant quasi-permanent combinations of actions.

AB - In November 2022, the European Committee for Standardization (CEN) published the Technical Specification CEN/TS 19101:2022, “Design of Fibre-Polymer Composite Structures”, which is a milestone towards the widespread application of composite materials in civil engineering structures. This paper gives an overview of the clauses about serviceability limit states (SLS) and the creep rupture verification at ultimate limit state (ULS). The SLS criteria include deflections, vibrations and matrix cracking verifications, which should consider the effects of environmental conditions and creep effects. The creep rupture of composite members and components is prevented by limiting the magnitudes of sustained stresses, using relevant quasi-permanent combinations of actions.

KW - Creep rupture

KW - Design code

KW - European Technical Specification

KW - Fibre-polymer composites

KW - Serviceability limit states

UR - http://www.scopus.com/inward/record.url?scp=85197549628&partnerID=8YFLogxK

U2 - 10.5281/zenodo.8066441

DO - 10.5281/zenodo.8066441

M3 - Conference contribution

AN - SCOPUS:85197549628

BT - Proceedings of the 11th International Conference on Fiber-Reinforced Polymer (FRP) Composites in Civil Engineering (CICE 2023)

PB - Zenodo

Y2 - 23 July 2023 through 26 July 2023

ER -

DESIGN OF FIBRE-POLYMER COMPOSITE STRUCTURES (CEN/TS 19101): SERVICEABILITY LIMIT STATES AND CREEP RUPTURE

Abstract

Conference

Bibliographical note

Keywords

Access to Document

Other files and links

Fingerprint

Cite this