Design of a short polarization converter on InP/InGaAsP using asymmetrical waveguides

Y.C. Zhu, F.H. Groen, D.H.P. Maat, X.J.M. Leijtens, M.K. Smit

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Abstract

Simulation results are presented for a short polarization converter using asymmetrical waveguides, containing one sloped sidewall and one vertical sidewall. The angles of both modes with respect to the coordinate axes have been calculated as a function of the waveguide width. Polarization converters with one section (length is 196 mm), one period (2 sections) or 2 periods can be realized by selecting the suitable width and length of this waveguide. Tolerance of width and length of the waveguide and thickness of film layer for the polarization converter have been analyzed and will be discussed.
Original languageEnglish
Title of host publicationProceedings of the 5th annual symposium of the IEEE/LEOS Benelux Chapter : October 30, 2000, Delft , the Netherlands
EditorsX.J.M. Leijtens, J.H. Besten, den
Place of PublicationDelft
PublisherTechnische Universiteit Delft
Pages227-230
ISBN (Print)90-9014260-6
Publication statusPublished - 2000
Event5th Annual Symposium of the IEEE/LEOS Benelux Chapter - Delft, Netherlands
Duration: 30 Oct 200030 Oct 2000

Conference

Conference5th Annual Symposium of the IEEE/LEOS Benelux Chapter
Country/TerritoryNetherlands
CityDelft
Period30/10/0030/10/00
OtherIEEE/LEOS symposium

Fingerprint

Dive into the research topics of 'Design of a short polarization converter on InP/InGaAsP using asymmetrical waveguides'. Together they form a unique fingerprint.

Cite this