Conductive polymer tape containing highly oriented carbon nanofillers

H. Deng; R. Zhang; E. Bilotti; J. Loos; Ton Peijs

doi:10.1002/app.29624

Conductive polymer tape containing highly oriented carbon nanofillers

H. Deng
, R. Zhang
, E. Bilotti
, J. Loos
, Ton Peijs

Photonic Integration

Research output: Contribution to journal › Article › Academic › peer-review

88 Citations (Scopus)

3 Downloads (Pure)

Abstract

The effect of the orientation of carbon fillers with different aspect ratios on the resistivity and morphology of conductive polymer composites (CPCs) based on polypropylene was investigated in this study. Multiwall carbon nanotubes (MWNTs) and carbon black (CB) were used as conductive fillers. The CPCs were made by melt compounding, hot pressing, and solid-state drawing. The alignment of the filler was observed after solid-state drawing. The resistivity of the composites increased with the draw ratio at relatively low carbon filler loadings (

Original language	English
Pages (from-to)	742-751
Number of pages	10
Journal	Journal of Applied Polymer Science
Volume	113
Issue number	2
DOIs	https://doi.org/10.1002/app.29624
Publication status	Published - 2009

Access to Document

10.1002/app.29624

Cite this

@article{a0cffb5b43cd4d2cac0995654cc61001,

title = "Conductive polymer tape containing highly oriented carbon nanofillers",

abstract = "The effect of the orientation of carbon fillers with different aspect ratios on the resistivity and morphology of conductive polymer composites (CPCs) based on polypropylene was investigated in this study. Multiwall carbon nanotubes (MWNTs) and carbon black (CB) were used as conductive fillers. The CPCs were made by melt compounding, hot pressing, and solid-state drawing. The alignment of the filler was observed after solid-state drawing. The resistivity of the composites increased with the draw ratio at relatively low carbon filler loadings (",

author = "H. Deng and R. Zhang and E. Bilotti and J. Loos and Ton Peijs",

year = "2009",

doi = "10.1002/app.29624",

language = "English",

volume = "113",

pages = "742--751",

journal = "Journal of Applied Polymer Science",

issn = "0021-8995",

publisher = "Wiley",

number = "2",

}

TY - JOUR

T1 - Conductive polymer tape containing highly oriented carbon nanofillers

AU - Deng, H.

AU - Zhang, R.

AU - Bilotti, E.

AU - Loos, J.

AU - Peijs, Ton

PY - 2009

Y1 - 2009

N2 - The effect of the orientation of carbon fillers with different aspect ratios on the resistivity and morphology of conductive polymer composites (CPCs) based on polypropylene was investigated in this study. Multiwall carbon nanotubes (MWNTs) and carbon black (CB) were used as conductive fillers. The CPCs were made by melt compounding, hot pressing, and solid-state drawing. The alignment of the filler was observed after solid-state drawing. The resistivity of the composites increased with the draw ratio at relatively low carbon filler loadings (

AB - The effect of the orientation of carbon fillers with different aspect ratios on the resistivity and morphology of conductive polymer composites (CPCs) based on polypropylene was investigated in this study. Multiwall carbon nanotubes (MWNTs) and carbon black (CB) were used as conductive fillers. The CPCs were made by melt compounding, hot pressing, and solid-state drawing. The alignment of the filler was observed after solid-state drawing. The resistivity of the composites increased with the draw ratio at relatively low carbon filler loadings (

U2 - 10.1002/app.29624

DO - 10.1002/app.29624

M3 - Article

SN - 0021-8995

VL - 113

SP - 742

EP - 751

JO - Journal of Applied Polymer Science

JF - Journal of Applied Polymer Science

IS - 2

ER -

Conductive polymer tape containing highly oriented carbon nanofillers

Abstract

Access to Document

Fingerprint

Cite this