Comparison of arrival time estimate methods for partial discharge pulses in power cables

P. Wagenaars; P.A.A.F. Wouters; P.C.J.M. Wielen, van der; F. Steennis

doi:10.1109/CMD.2008.4580494

Comparison of arrival time estimate methods for partial discharge pulses in power cables

P. Wagenaars
, P.A.A.F. Wouters
, P.C.J.M. Wielen, van der
, F. Steennis

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

2 Citations (Scopus)

295 Downloads (Pure)

Abstract

Accurate location of partial discharges in power cable systems, based on arrival times, is critical for the identification and assessment of defects. This paper evaluates different time-of-arrival algorithms in order to determine which method yields most accurate location under different circumstances. These methods are based on threshold, Akaikepsilas information criterion, energy criterion, Gaborpsilas signal epoch and phase in frequency domain. Several criteria are defined by which the algorithms are evaluated. These criteria include the sensitivity to noise, pulse shape and effect of load impedance. The sensitivity of the methods upon varying these quantities is evaluated analytically and by means of simulations. From the results the energy criterion method and the phase method show the best performance

Original language	English
Title of host publication	Proceedings of 2008 International Conference on Condition Monitoring and Diagnosis : Beijing, China April 21 - 24, 2008
Place of Publication	Piscataway
Publisher	Institute of Electrical and Electronics Engineers
Pages	1162-1165
ISBN (Print)	978-1-424-41621-9
DOIs	https://doi.org/10.1109/CMD.2008.4580494
Publication status	Published - 2008

Access to Document

10.1109/CMD.2008.4580494

Metis216957Final published version, 192 KB

Cite this

Wagenaars, P., Wouters, P. A. A. F., Wielen, van der, P. C. J. M., & Steennis, F. (2008). Comparison of arrival time estimate methods for partial discharge pulses in power cables. In Proceedings of 2008 International Conference on Condition Monitoring and Diagnosis : Beijing, China April 21 - 24, 2008 (pp. 1162-1165). Institute of Electrical and Electronics Engineers. https://doi.org/10.1109/CMD.2008.4580494

@inproceedings{b1ab5cbde02945cba02888a67e53b2c2,

title = "Comparison of arrival time estimate methods for partial discharge pulses in power cables",

abstract = "Accurate location of partial discharges in power cable systems, based on arrival times, is critical for the identification and assessment of defects. This paper evaluates different time-of-arrival algorithms in order to determine which method yields most accurate location under different circumstances. These methods are based on threshold, Akaikepsilas information criterion, energy criterion, Gaborpsilas signal epoch and phase in frequency domain. Several criteria are defined by which the algorithms are evaluated. These criteria include the sensitivity to noise, pulse shape and effect of load impedance. The sensitivity of the methods upon varying these quantities is evaluated analytically and by means of simulations. From the results the energy criterion method and the phase method show the best performance",

author = "P. Wagenaars and P.A.A.F. Wouters and \{Wielen, van der\}, P.C.J.M. and F. Steennis",

year = "2008",

doi = "10.1109/CMD.2008.4580494",

language = "English",

isbn = "978-1-424-41621-9",

pages = "1162--1165",

booktitle = "Proceedings of 2008 International Conference on Condition Monitoring and Diagnosis : Beijing, China April 21 - 24, 2008",

publisher = "Institute of Electrical and Electronics Engineers",

address = "United States",

}

Wagenaars, P, Wouters, PAAF , Wielen, van der, PCJM & Steennis, F 2008, Comparison of arrival time estimate methods for partial discharge pulses in power cables. in Proceedings of 2008 International Conference on Condition Monitoring and Diagnosis : Beijing, China April 21 - 24, 2008. Institute of Electrical and Electronics Engineers, Piscataway, pp. 1162-1165. https://doi.org/10.1109/CMD.2008.4580494

Comparison of arrival time estimate methods for partial discharge pulses in power cables. / Wagenaars, P.; Wouters, P.A.A.F.; Wielen, van der, P.C.J.M. et al.
Proceedings of 2008 International Conference on Condition Monitoring and Diagnosis : Beijing, China April 21 - 24, 2008. Piscataway: Institute of Electrical and Electronics Engineers, 2008. p. 1162-1165.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

TY - GEN

T1 - Comparison of arrival time estimate methods for partial discharge pulses in power cables

AU - Wagenaars, P.

AU - Wouters, P.A.A.F.

AU - Wielen, van der, P.C.J.M.

AU - Steennis, F.

PY - 2008

Y1 - 2008

N2 - Accurate location of partial discharges in power cable systems, based on arrival times, is critical for the identification and assessment of defects. This paper evaluates different time-of-arrival algorithms in order to determine which method yields most accurate location under different circumstances. These methods are based on threshold, Akaikepsilas information criterion, energy criterion, Gaborpsilas signal epoch and phase in frequency domain. Several criteria are defined by which the algorithms are evaluated. These criteria include the sensitivity to noise, pulse shape and effect of load impedance. The sensitivity of the methods upon varying these quantities is evaluated analytically and by means of simulations. From the results the energy criterion method and the phase method show the best performance

AB - Accurate location of partial discharges in power cable systems, based on arrival times, is critical for the identification and assessment of defects. This paper evaluates different time-of-arrival algorithms in order to determine which method yields most accurate location under different circumstances. These methods are based on threshold, Akaikepsilas information criterion, energy criterion, Gaborpsilas signal epoch and phase in frequency domain. Several criteria are defined by which the algorithms are evaluated. These criteria include the sensitivity to noise, pulse shape and effect of load impedance. The sensitivity of the methods upon varying these quantities is evaluated analytically and by means of simulations. From the results the energy criterion method and the phase method show the best performance

U2 - 10.1109/CMD.2008.4580494

DO - 10.1109/CMD.2008.4580494

M3 - Conference contribution

SN - 978-1-424-41621-9

SP - 1162

EP - 1165

BT - Proceedings of 2008 International Conference on Condition Monitoring and Diagnosis : Beijing, China April 21 - 24, 2008

PB - Institute of Electrical and Electronics Engineers

CY - Piscataway

ER -

Wagenaars P, Wouters PAAF , Wielen, van der PCJM, Steennis F. Comparison of arrival time estimate methods for partial discharge pulses in power cables. In Proceedings of 2008 International Conference on Condition Monitoring and Diagnosis : Beijing, China April 21 - 24, 2008. Piscataway: Institute of Electrical and Electronics Engineers. 2008. p. 1162-1165 doi: 10.1109/CMD.2008.4580494

Comparison of arrival time estimate methods for partial discharge pulses in power cables

Abstract

Access to Document

Fingerprint

Cite this