Comparative Analysis of Multiple Active Bridge Converters Configurations in Modular Smart Transformer

Levy Ferreira Costa; Felix Hoffmann; Giampaolo Buticchi; Marco Liserre

doi:10.1109/TIE.2018.2818658

Comparative Analysis of Multiple Active Bridge Converters Configurations in Modular Smart Transformer

Levy Ferreira Costa (Corresponding author)
, Felix Hoffmann
, Giampaolo Buticchi
, Marco Liserre

Research output: Contribution to journal › Article › Academic › peer-review

110 Citations (Scopus)

Abstract

In this paper, the quadruple active bridge (QAB) dc-dc converter is proposed to be used as a building block to implement the dc-dc stage of a smart transformer (ST). Different configurations (symmetrical, asymmetrical, and rated for voltage/power) for this converter are considered for investigation. Four different architectures of ST, including one based on the dual active bridge converter as a benchmark and three based on the QAB converter, are presented and compared in terms of cost, efficiency, reliability, and implementation complexity. As an additional contribution, different semiconductor technologies (silicon IGBT and silicon-carbide MOSFETs) are evaluated in order to verify their impact on ST application. The design for each architecture is described and the results are compared. In order to validate the theoretical analysis developed in this paper, a 20-kW prototype is built and experimented.

Original language	English
Article number	8322202
Pages (from-to)	191-202
Number of pages	12
Journal	IEEE Transactions on Industrial Electronics
Volume	66
DOIs	https://doi.org/10.1109/TIE.2018.2818658
Publication status	Published - Jan 2019
Externally published	Yes

Bibliographical note

Funding Information:
Manuscript received July 31, 2017; revised December 14, 2017 and January 25, 2017; accepted February 28, 2018. Date of publication March 22, 2018; date of current version August 31, 2018. This work was supported by the European Research Council under the European Union’s Seventh Framework Programme (FP/2007-2013) / ERC under Grant 616344-HEART. (Corresponding author: Levy Ferreira Costa.) The authors are with the Christian-Albrecht-University of Kiel, 24118 Kiel, Germany (e-mail: [email protected]; [email protected]; [email protected]; [email protected]).

Funding

Manuscript received July 31, 2017; revised December 14, 2017 and January 25, 2017; accepted February 28, 2018. Date of publication March 22, 2018; date of current version August 31, 2018. This work was supported by the European Research Council under the European Union’s Seventh Framework Programme (FP/2007-2013) / ERC under Grant 616344-HEART. (Corresponding author: Levy Ferreira Costa.) The authors are with the Christian-Albrecht-University of Kiel, 24118 Kiel, Germany (e-mail: [email protected]; [email protected]; [email protected]; [email protected]).

Keywords

DC-DC converter
multiple active bridge converter
multiwinding transformer
smart transformer (ST)

Access to Document

10.1109/TIE.2018.2818658

Cite this

@article{0886ea9b915f47348b5447c16df62e5a,

title = "Comparative Analysis of Multiple Active Bridge Converters Configurations in Modular Smart Transformer",

abstract = "In this paper, the quadruple active bridge (QAB) dc-dc converter is proposed to be used as a building block to implement the dc-dc stage of a smart transformer (ST). Different configurations (symmetrical, asymmetrical, and rated for voltage/power) for this converter are considered for investigation. Four different architectures of ST, including one based on the dual active bridge converter as a benchmark and three based on the QAB converter, are presented and compared in terms of cost, efficiency, reliability, and implementation complexity. As an additional contribution, different semiconductor technologies (silicon IGBT and silicon-carbide MOSFETs) are evaluated in order to verify their impact on ST application. The design for each architecture is described and the results are compared. In order to validate the theoretical analysis developed in this paper, a 20-kW prototype is built and experimented.",

keywords = "DC-DC converter, multiple active bridge converter, multiwinding transformer, smart transformer (ST)",

author = "Costa, \{Levy Ferreira\} and Felix Hoffmann and Giampaolo Buticchi and Marco Liserre",

note = "Funding Information: Manuscript received July 31, 2017; revised December 14, 2017 and January 25, 2017; accepted February 28, 2018. Date of publication March 22, 2018; date of current version August 31, 2018. This work was supported by the European Research Council under the European Union{\textquoteright}s Seventh Framework Programme (FP/2007-2013) / ERC under Grant 616344-HEART. (Corresponding author: Levy Ferreira Costa.) The authors are with the Christian-Albrecht-University of Kiel, 24118 Kiel, Germany (e-mail: [email protected]; [email protected]; [email protected]; [email protected]). ",

year = "2019",

month = jan,

doi = "10.1109/TIE.2018.2818658",

language = "English",

volume = "66",

pages = "191--202",

journal = "IEEE Transactions on Industrial Electronics",

issn = "0278-0046",

publisher = "Institute of Electrical and Electronics Engineers",

}

TY - JOUR

T1 - Comparative Analysis of Multiple Active Bridge Converters Configurations in Modular Smart Transformer

AU - Costa, Levy Ferreira

AU - Hoffmann, Felix

AU - Buticchi, Giampaolo

AU - Liserre, Marco

N1 - Funding Information: Manuscript received July 31, 2017; revised December 14, 2017 and January 25, 2017; accepted February 28, 2018. Date of publication March 22, 2018; date of current version August 31, 2018. This work was supported by the European Research Council under the European Union’s Seventh Framework Programme (FP/2007-2013) / ERC under Grant 616344-HEART. (Corresponding author: Levy Ferreira Costa.) The authors are with the Christian-Albrecht-University of Kiel, 24118 Kiel, Germany (e-mail: [email protected]; [email protected]; [email protected]; [email protected]).

PY - 2019/1

Y1 - 2019/1

N2 - In this paper, the quadruple active bridge (QAB) dc-dc converter is proposed to be used as a building block to implement the dc-dc stage of a smart transformer (ST). Different configurations (symmetrical, asymmetrical, and rated for voltage/power) for this converter are considered for investigation. Four different architectures of ST, including one based on the dual active bridge converter as a benchmark and three based on the QAB converter, are presented and compared in terms of cost, efficiency, reliability, and implementation complexity. As an additional contribution, different semiconductor technologies (silicon IGBT and silicon-carbide MOSFETs) are evaluated in order to verify their impact on ST application. The design for each architecture is described and the results are compared. In order to validate the theoretical analysis developed in this paper, a 20-kW prototype is built and experimented.

AB - In this paper, the quadruple active bridge (QAB) dc-dc converter is proposed to be used as a building block to implement the dc-dc stage of a smart transformer (ST). Different configurations (symmetrical, asymmetrical, and rated for voltage/power) for this converter are considered for investigation. Four different architectures of ST, including one based on the dual active bridge converter as a benchmark and three based on the QAB converter, are presented and compared in terms of cost, efficiency, reliability, and implementation complexity. As an additional contribution, different semiconductor technologies (silicon IGBT and silicon-carbide MOSFETs) are evaluated in order to verify their impact on ST application. The design for each architecture is described and the results are compared. In order to validate the theoretical analysis developed in this paper, a 20-kW prototype is built and experimented.

KW - DC-DC converter

KW - multiple active bridge converter

KW - multiwinding transformer

KW - smart transformer (ST)

UR - https://www.scopus.com/pages/publications/85044324707

U2 - 10.1109/TIE.2018.2818658

DO - 10.1109/TIE.2018.2818658

M3 - Article

AN - SCOPUS:85044324707

SN - 0278-0046

VL - 66

SP - 191

EP - 202

JO - IEEE Transactions on Industrial Electronics

JF - IEEE Transactions on Industrial Electronics

M1 - 8322202

ER -

Comparative Analysis of Multiple Active Bridge Converters Configurations in Modular Smart Transformer

Abstract

Bibliographical note

Funding

Keywords

Access to Document

Other files and links

Fingerprint

Cite this