An expert machine tools selection system for turning operation

C.F. Tan; S.N. Khalil; J. Karjanto; L.S. Wahidin; W. Chen; G.W.M. Rauterberg

doi:10.1088/1757-899X/88/1/012044

An expert machine tools selection system for turning operation

C.F. Tan
, S.N. Khalil
, J. Karjanto
, L.S. Wahidin
, W. Chen
, G.W.M. Rauterberg

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

3 Citations (Scopus)

273 Downloads (Pure)

Abstract

The turning machining process is an important process in the manufacturing industry. It is important to select the right tool for the turning process so that the manufacturing cost will be decreased. The main objective of this research is to select the most suitable machine tools with respect to user input requirement. The selection criteria are based on rule based expert system and multi-criteria weighted average method. The developed system consists of Knowledge Acquisition Module, Machine Tool Selection Module, User Interface Module and Help Module. The system capable of selecting the most suitable machine along with its full specification and ranks the machines based on criteria weighted. The main benefits from using the system is to reduce the complexity in the decision making for selecting the most appropriate machine tools to suit one requirement in the turning process for manufacturing industry.

Original language	English
Title of host publication	7th International Conference on Cooling & Heating Technologies (ICCHT 2014) 4–6 November 2014, Selangor, Malaysia
Publisher	Institute of Physics
Number of pages	8
DOIs	https://doi.org/10.1088/1757-899X/88/1/012044
Publication status	Published - 21 Sept 2015
Event	7th International Conference on Cooling and Heating Technologies, ICCHT 2014 - Subang Jaya, Selangor Darul Ehsan, Malaysia Duration: 4 Nov 2014 → 6 Nov 2014 http://www.myiem.org.my/ICCHT2014/

Publication series

Name	IOP Conference Series: Materials Science and Engineering
Volume	88

Conference

Conference	7th International Conference on Cooling and Heating Technologies, ICCHT 2014
Abbreviated title	ICCHT
Country/Territory	Malaysia
City	Subang Jaya, Selangor Darul Ehsan
Period	4/11/14 → 6/11/14
Internet address	http://www.myiem.org.my/ICCHT2014/

Access to Document

10.1088/1757-899X/88/1/012044

Publisher versionFinal published version, 915 KB

Cite this

Tan, C. F., Khalil, S. N., Karjanto, J., Wahidin, L. S., Chen, W., & Rauterberg, G. W. M. (2015). An expert machine tools selection system for turning operation. In 7th International Conference on Cooling & Heating Technologies (ICCHT 2014) 4–6 November 2014, Selangor, Malaysia Article 012044 (IOP Conference Series: Materials Science and Engineering; Vol. 88). Institute of Physics. https://doi.org/10.1088/1757-899X/88/1/012044

@inproceedings{49a1a4603fba4217bd80c4751a8ef4a7,

title = "An expert machine tools selection system for turning operation",

abstract = "The turning machining process is an important process in the manufacturing industry. It is important to select the right tool for the turning process so that the manufacturing cost will be decreased. The main objective of this research is to select the most suitable machine tools with respect to user input requirement. The selection criteria are based on rule based expert system and multi-criteria weighted average method. The developed system consists of Knowledge Acquisition Module, Machine Tool Selection Module, User Interface Module and Help Module. The system capable of selecting the most suitable machine along with its full specification and ranks the machines based on criteria weighted. The main benefits from using the system is to reduce the complexity in the decision making for selecting the most appropriate machine tools to suit one requirement in the turning process for manufacturing industry.",

author = "C.F. Tan and S.N. Khalil and J. Karjanto and L.S. Wahidin and W. Chen and G.W.M. Rauterberg",

year = "2015",

month = sep,

day = "21",

doi = "10.1088/1757-899X/88/1/012044",

language = "English",

series = "IOP Conference Series: Materials Science and Engineering",

publisher = "Institute of Physics",

booktitle = "7th International Conference on Cooling \& Heating Technologies (ICCHT 2014) 4{\textendash}6 November 2014, Selangor, Malaysia",

address = "United Kingdom",

note = "7th International Conference on Cooling and Heating Technologies, ICCHT 2014, ICCHT ; Conference date: 04-11-2014 Through 06-11-2014",

url = "http://www.myiem.org.my/ICCHT2014/",

}

Tan, CF, Khalil, SN, Karjanto, J, Wahidin, LS, Chen, W & Rauterberg, GWM 2015, An expert machine tools selection system for turning operation. in 7th International Conference on Cooling & Heating Technologies (ICCHT 2014) 4–6 November 2014, Selangor, Malaysia., 012044, IOP Conference Series: Materials Science and Engineering, vol. 88, Institute of Physics, 7th International Conference on Cooling and Heating Technologies, ICCHT 2014, Subang Jaya, Selangor Darul Ehsan, Malaysia, 4/11/14. https://doi.org/10.1088/1757-899X/88/1/012044

An expert machine tools selection system for turning operation. / Tan, C.F.; Khalil, S.N.; Karjanto, J. et al.
7th International Conference on Cooling & Heating Technologies (ICCHT 2014) 4–6 November 2014, Selangor, Malaysia. Institute of Physics, 2015. 012044 (IOP Conference Series: Materials Science and Engineering; Vol. 88).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

TY - GEN

T1 - An expert machine tools selection system for turning operation

AU - Tan, C.F.

AU - Khalil, S.N.

AU - Karjanto, J.

AU - Wahidin, L.S.

AU - Chen, W.

AU - Rauterberg, G.W.M.

PY - 2015/9/21

Y1 - 2015/9/21

N2 - The turning machining process is an important process in the manufacturing industry. It is important to select the right tool for the turning process so that the manufacturing cost will be decreased. The main objective of this research is to select the most suitable machine tools with respect to user input requirement. The selection criteria are based on rule based expert system and multi-criteria weighted average method. The developed system consists of Knowledge Acquisition Module, Machine Tool Selection Module, User Interface Module and Help Module. The system capable of selecting the most suitable machine along with its full specification and ranks the machines based on criteria weighted. The main benefits from using the system is to reduce the complexity in the decision making for selecting the most appropriate machine tools to suit one requirement in the turning process for manufacturing industry.

AB - The turning machining process is an important process in the manufacturing industry. It is important to select the right tool for the turning process so that the manufacturing cost will be decreased. The main objective of this research is to select the most suitable machine tools with respect to user input requirement. The selection criteria are based on rule based expert system and multi-criteria weighted average method. The developed system consists of Knowledge Acquisition Module, Machine Tool Selection Module, User Interface Module and Help Module. The system capable of selecting the most suitable machine along with its full specification and ranks the machines based on criteria weighted. The main benefits from using the system is to reduce the complexity in the decision making for selecting the most appropriate machine tools to suit one requirement in the turning process for manufacturing industry.

UR - https://www.scopus.com/pages/publications/84948403907

U2 - 10.1088/1757-899X/88/1/012044

DO - 10.1088/1757-899X/88/1/012044

M3 - Conference contribution

AN - SCOPUS:84948403907

T3 - IOP Conference Series: Materials Science and Engineering

BT - 7th International Conference on Cooling & Heating Technologies (ICCHT 2014) 4–6 November 2014, Selangor, Malaysia

PB - Institute of Physics

T2 - 7th International Conference on Cooling and Heating Technologies, ICCHT 2014

Y2 - 4 November 2014 through 6 November 2014

ER -

Tan CF, Khalil SN, Karjanto J, Wahidin LS, Chen W, Rauterberg GWM. An expert machine tools selection system for turning operation. In 7th International Conference on Cooling & Heating Technologies (ICCHT 2014) 4–6 November 2014, Selangor, Malaysia. Institute of Physics. 2015. 012044. (IOP Conference Series: Materials Science and Engineering). doi: 10.1088/1757-899X/88/1/012044

An expert machine tools selection system for turning operation

Abstract

Publication series

Conference

Access to Document

Other files and links

Fingerprint

Cite this