A three-segment inverse method for the design of CoA correcting TIR collimators

C.R. Prins; J.H.M. Thije Boonkkamp, ten; T.W. Tukker; W.L. IJzerman

doi:10.1007/978-3-319-05365-3_44

A three-segment inverse method for the design of CoA correcting TIR collimators

C.R. Prins, J.H.M. Thije Boonkkamp, ten, T.W. Tukker, W.L. IJzerman

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

1 Downloads (Pure)

Abstract

Color-over-Angle (CoA) variation in the light output of white phosphor- converted LEDs is a common and unsolved problem. Recently, the same authors introduced a new inverse method to reduce CoA variation using a special collimator. This short paper introduces a variant of the method with two important advantages compared to the original method.

Original language	English
Title of host publication	Progress in Industrial Mathematics at ECMI 2012
Editors	M. Fontes, M. Günther, N. Marheineke
Place of Publication	Switzerland
Publisher	Springer
Pages	323-328
ISBN (Print)	978-3-319-05364-6
DOIs	https://doi.org/10.1007/978-3-319-05365-3_44
Publication status	Published - 2014
Event	17th European Conference on Mathematics for Industry (ECMI 2012), July 23-27, 2012, Lund, Sweden - Lund, Sweden Duration: 23 Jul 2012 → 27 Jul 2012 http://www.maths.lth.se/ecmi/ecmi2012_org/

Publication series

Name	Mathematics in Industry
Volume	19
ISSN (Print)	1612-3956

Conference

Conference	17th European Conference on Mathematics for Industry (ECMI 2012), July 23-27, 2012, Lund, Sweden
Abbreviated title	ECMI 2012
Country/Territory	Sweden
City	Lund
Period	23/07/12 → 27/07/12
Internet address	http://www.maths.lth.se/ecmi/ecmi2012_org/

Access to Document

10.1007/978-3-319-05365-3_44

Cite this

Prins, C. R., Thije Boonkkamp, ten, J. H. M., Tukker, T. W., & IJzerman, W. L. (2014). A three-segment inverse method for the design of CoA correcting TIR collimators. In M. Fontes, M. Günther, & N. Marheineke (Eds.), Progress in Industrial Mathematics at ECMI 2012 (pp. 323-328). (Mathematics in Industry; Vol. 19). Springer. https://doi.org/10.1007/978-3-319-05365-3_44

@inproceedings{dce110a8ab0643c9bad60e210a0b33da,

title = "A three-segment inverse method for the design of CoA correcting TIR collimators",

abstract = "Color-over-Angle (CoA) variation in the light output of white phosphor- converted LEDs is a common and unsolved problem. Recently, the same authors introduced a new inverse method to reduce CoA variation using a special collimator. This short paper introduces a variant of the method with two important advantages compared to the original method.",

author = "C.R. Prins and {Thije Boonkkamp, ten}, J.H.M. and T.W. Tukker and W.L. IJzerman",

year = "2014",

doi = "10.1007/978-3-319-05365-3_44",

language = "English",

isbn = "978-3-319-05364-6",

series = "Mathematics in Industry",

publisher = "Springer",

pages = "323--328",

editor = "M. Fontes and M. G{\"u}nther and N. Marheineke",

booktitle = "Progress in Industrial Mathematics at ECMI 2012",

address = "Germany",

note = "17th European Conference on Mathematics for Industry (ECMI 2012), July 23-27, 2012, Lund, Sweden, ECMI 2012 ; Conference date: 23-07-2012 Through 27-07-2012",

url = "http://www.maths.lth.se/ecmi/ecmi2012_org/",

}

Prins, CR, Thije Boonkkamp, ten, JHM, Tukker, TW & IJzerman, WL 2014, A three-segment inverse method for the design of CoA correcting TIR collimators. in M Fontes, M Günther & N Marheineke (eds), Progress in Industrial Mathematics at ECMI 2012. Mathematics in Industry, vol. 19, Springer, Switzerland, pp. 323-328, 17th European Conference on Mathematics for Industry (ECMI 2012), July 23-27, 2012, Lund, Sweden, Lund, Sweden, 23/07/12. https://doi.org/10.1007/978-3-319-05365-3_44

A three-segment inverse method for the design of CoA correcting TIR collimators. / Prins, C.R.; Thije Boonkkamp, ten, J.H.M.; Tukker, T.W. et al.

Progress in Industrial Mathematics at ECMI 2012. ed. / M. Fontes; M. Günther; N. Marheineke. Switzerland : Springer, 2014. p. 323-328 (Mathematics in Industry; Vol. 19).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

TY - GEN

T1 - A three-segment inverse method for the design of CoA correcting TIR collimators

AU - Prins, C.R.

AU - Thije Boonkkamp, ten, J.H.M.

AU - Tukker, T.W.

AU - IJzerman, W.L.

PY - 2014

Y1 - 2014

N2 - Color-over-Angle (CoA) variation in the light output of white phosphor- converted LEDs is a common and unsolved problem. Recently, the same authors introduced a new inverse method to reduce CoA variation using a special collimator. This short paper introduces a variant of the method with two important advantages compared to the original method.

AB - Color-over-Angle (CoA) variation in the light output of white phosphor- converted LEDs is a common and unsolved problem. Recently, the same authors introduced a new inverse method to reduce CoA variation using a special collimator. This short paper introduces a variant of the method with two important advantages compared to the original method.

U2 - 10.1007/978-3-319-05365-3_44

DO - 10.1007/978-3-319-05365-3_44

M3 - Conference contribution

SN - 978-3-319-05364-6

T3 - Mathematics in Industry

SP - 323

EP - 328

BT - Progress in Industrial Mathematics at ECMI 2012

A2 - Fontes, M.

A2 - Günther, M.

A2 - Marheineke, N.

PB - Springer

CY - Switzerland

T2 - 17th European Conference on Mathematics for Industry (ECMI 2012), July 23-27, 2012, Lund, Sweden

Y2 - 23 July 2012 through 27 July 2012

ER -

A three-segment inverse method for the design of CoA correcting TIR collimators

Abstract

Publication series

Conference

Access to Document

Fingerprint

Cite this