A broadband, inductorless LNA for multi-standard aplications

Maja Vidojkovic; Johan van der Tang; Mihai Sanduleanu; Peter Baltus; Arthur Van Roermund

doi:10.1109/ECCTD.2007.4529586

A broadband, inductorless LNA for multi-standard aplications

Maja Vidojkovic, Johan van der Tang, Mihai Sanduleanu, Peter Baltus, Arthur Van Roermund

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

14 Citations (Scopus)

Abstract

In this paper a novel broadband, inductor-less, resistive-feedback, CMOS LNA is presented. The amplifier is designed for the frequency band 0.3GHz-2GHz. The measured voltage gain of the implemented LNA is 12dB at 1GHz and the 3dB bandwidth is 2GHz. An IIP3 of-16 dBm and a noise figure of 4dB are measured at 900 MHz. The value of the measured IIP2 is -13dBm. The S11 is better than -10 dB in the frequency band from 300MHz up to 1GHz. The power dissipation is 18mW from a 1.2V supply. The circuit is designed in a digital CMOS 90nm Low Power (LP) process without extra process options.

Original language	English
Title of host publication	2007 18th European Conference on Circuit Theory and Design
Publisher	Institute of Electrical and Electronics Engineers
Pages	260-263
Number of pages	4
ISBN (Print)	978-1-4244-1341-6
DOIs	https://doi.org/10.1109/ECCTD.2007.4529586
Publication status	Published - 23 May 2008
Event	European Conference on Circuit Theory and Design, ECCTD 2007 - Seville, Spain Duration: 27 Aug 2007 → 30 Aug 2007

Conference

Conference	European Conference on Circuit Theory and Design, ECCTD 2007
Country/Territory	Spain
City	Seville
Period	27/08/07 → 30/08/07
Other	ECCTD 2007 - Sevilla - Spain

Access to Document

10.1109/ECCTD.2007.4529586

Cite this

@inproceedings{cee00eb1c95f44a59e88113a3a33ab61,

title = "A broadband, inductorless LNA for multi-standard aplications",

abstract = "In this paper a novel broadband, inductor-less, resistive-feedback, CMOS LNA is presented. The amplifier is designed for the frequency band 0.3GHz-2GHz. The measured voltage gain of the implemented LNA is 12dB at 1GHz and the 3dB bandwidth is 2GHz. An IIP3 of-16 dBm and a noise figure of 4dB are measured at 900 MHz. The value of the measured IIP2 is -13dBm. The S11 is better than -10 dB in the frequency band from 300MHz up to 1GHz. The power dissipation is 18mW from a 1.2V supply. The circuit is designed in a digital CMOS 90nm Low Power (LP) process without extra process options.",

author = "Maja Vidojkovic and {van der Tang}, Johan and Mihai Sanduleanu and Peter Baltus and {Van Roermund}, Arthur",

year = "2008",

month = may,

day = "23",

doi = "10.1109/ECCTD.2007.4529586",

language = "English",

isbn = "978-1-4244-1341-6",

pages = "260--263",

booktitle = "2007 18th European Conference on Circuit Theory and Design",

publisher = "Institute of Electrical and Electronics Engineers",

address = "United States",

note = "European Conference on Circuit Theory and Design, ECCTD 2007 ; Conference date: 27-08-2007 Through 30-08-2007",

}

Vidojkovic, M, van der Tang, J, Sanduleanu, M, Baltus, P & Van Roermund, A 2008, A broadband, inductorless LNA for multi-standard aplications. in 2007 18th European Conference on Circuit Theory and Design., 4529586, Institute of Electrical and Electronics Engineers, pp. 260-263, European Conference on Circuit Theory and Design, ECCTD 2007, Seville, Spain, 27/08/07. https://doi.org/10.1109/ECCTD.2007.4529586

A broadband, inductorless LNA for multi-standard aplications. / Vidojkovic, Maja; van der Tang, Johan; Sanduleanu, Mihai et al.
2007 18th European Conference on Circuit Theory and Design. Institute of Electrical and Electronics Engineers, 2008. p. 260-263 4529586.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

TY - GEN

T1 - A broadband, inductorless LNA for multi-standard aplications

AU - Vidojkovic, Maja

AU - van der Tang, Johan

AU - Sanduleanu, Mihai

AU - Baltus, Peter

AU - Van Roermund, Arthur

PY - 2008/5/23

Y1 - 2008/5/23

N2 - In this paper a novel broadband, inductor-less, resistive-feedback, CMOS LNA is presented. The amplifier is designed for the frequency band 0.3GHz-2GHz. The measured voltage gain of the implemented LNA is 12dB at 1GHz and the 3dB bandwidth is 2GHz. An IIP3 of-16 dBm and a noise figure of 4dB are measured at 900 MHz. The value of the measured IIP2 is -13dBm. The S11 is better than -10 dB in the frequency band from 300MHz up to 1GHz. The power dissipation is 18mW from a 1.2V supply. The circuit is designed in a digital CMOS 90nm Low Power (LP) process without extra process options.

AB - In this paper a novel broadband, inductor-less, resistive-feedback, CMOS LNA is presented. The amplifier is designed for the frequency band 0.3GHz-2GHz. The measured voltage gain of the implemented LNA is 12dB at 1GHz and the 3dB bandwidth is 2GHz. An IIP3 of-16 dBm and a noise figure of 4dB are measured at 900 MHz. The value of the measured IIP2 is -13dBm. The S11 is better than -10 dB in the frequency band from 300MHz up to 1GHz. The power dissipation is 18mW from a 1.2V supply. The circuit is designed in a digital CMOS 90nm Low Power (LP) process without extra process options.

UR - http://www.scopus.com/inward/record.url?scp=49749103929&partnerID=8YFLogxK

U2 - 10.1109/ECCTD.2007.4529586

DO - 10.1109/ECCTD.2007.4529586

M3 - Conference contribution

AN - SCOPUS:49749103929

SN - 978-1-4244-1341-6

SP - 260

EP - 263

BT - 2007 18th European Conference on Circuit Theory and Design

PB - Institute of Electrical and Electronics Engineers

T2 - European Conference on Circuit Theory and Design, ECCTD 2007

Y2 - 27 August 2007 through 30 August 2007

ER -

A broadband, inductorless LNA for multi-standard aplications

Abstract

Conference

Access to Document

Other files and links

Fingerprint

Cite this