A 10 GHz, 420μW Surface-Mounted LC Oscillator with Copper Coils

J.D. Tang, van der, R. Dekker, A.H.M. Roermund, van

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Abstract

An ultra low-power differential varactor-less 10 GHz LC oscillator has been fabricated. The implementation IC technology allows surface-mounting, eliminates substrate losses and has a copper back-end. The quality factor of the used 0.63nH inductor is estimated by measuring the required start-up current of the oscillator. With a supply voltage of 3V, the estimated quality factor is as high as 39 at 10 GHz. At 10 GHz the dissipation of the oscillator core is 420 mW (with 3V supply voltage) and the measured phase noise better than -94.7dBc/Hz at 1 MHz offset of the carrier. By increasing the bias current, the frequency can be tuned from 10.2 GHz to 8.7 GHz, which corresponds to 15.8% tuning range. The highlighted fabrication technology eliminates bond-wires, reduces cross-talk and yields excellent passives.
Original languageEnglish
Title of host publicationProceedings of the 15th ProRISC, Annual Workshop on Circuits, Systems and Signal Processing (ProRISC 2004) 25 - 26 November 2004, Veldhoven, the Netherlands
Place of PublicationUtrecht
PublisherSTW Technology Foundation
Pages599-603
ISBN (Print)90-73461-43-X
Publication statusPublished - 2004
Event2004 Annual Workshop on Circuits, Systems and Signal Processing (ProRISC 2004) - Veldhoven, Netherlands
Duration: 25 Nov 200426 Nov 2004

Conference

Conference2004 Annual Workshop on Circuits, Systems and Signal Processing (ProRISC 2004)
Abbreviated titleProRISC 2004
Country/TerritoryNetherlands
CityVeldhoven
Period25/11/0426/11/04

Fingerprint

Dive into the research topics of 'A 10 GHz, 420μW Surface-Mounted LC Oscillator with Copper Coils'. Together they form a unique fingerprint.

Cite this