If you made any changes in Pure these will be visible here soon.

Research Output 2001 2019

5 Citations (Scopus)

3D Printed structural electronics: embedding and connecting electronic components into freeform electronic devices

Maalderink, H. H., Bruning, F. B. J., de Schipper, M. R., van der Werff, J. J., Germs, W. C., Remmers, J. J. C. & Meinders, E. R., 2018, In : Plastics, Rubber and Composites. 47, 1, p. 35-41 7 p.

Research output: Contribution to journalArticleAcademicpeer-review

File
Printing
Electronic equipment
Stereolithography
Conductive materials
Curing

6th ECCOMAS Thematic Conference on the Mechanical Response of Composites

Remmers, J. J. C. (ed.) & Turon, A. (ed.), 2017, Eindhoven ed. Technische Universiteit Eindhoven.

Research output: Book/ReportBook editingAcademicpeer-review

Open Access
File

A cohesive segments approach for dynamic crack growth

Remmers, J. J. C., de Borst, R. & Needleman, A., 2004, IUTAM Symposium on Multiscale Modeling and Characterization of Elastic-Inelastic Behavior of Engineering Materials. Ahzi, S., Cherkaoui, M., Khaleel, M. A., Zbib, H. M., Zikry, M. A. & Lamatina, B. (eds.). Dordrecht: Springer, Vol. 114, p. 299-306 8 p. (Solid Mechanics and Its Applications; vol. 114)

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

190 Citations (Scopus)

A cohesive segments mehtod for the simulation of crack growth.

Remmers, J. J. C., Borst, de, R. & Needleman, A., 2003, In : Computational Mechanics. 31, p. 69-77

Research output: Contribution to journalArticleAcademicpeer-review

Crack Growth
Crack propagation
Cracks
Crack
Discontinuity
1 Citation (Scopus)

Adaptive modelling of delamination growth using isogeometric continuum shell elements

Fagerström, M. & Remmers, J. J. C., 2017

Research output: Contribution to conferencePaperAcademic

7 Citations (Scopus)

A discrete dislocation analysis of hydrogen-assisted mode-I fracture

Irani, N., Remmers, J. J. C. & Deshpande, V. S., Feb 2017, In : Mechanics of Materials. 105, Feb. 2017, p. 67-79

Research output: Contribution to journalArticleAcademicpeer-review

Hydrogen
hydrogen
toughness
Toughness
crack tips

A discrete dislocation analysis of hydrogen embrittlement

Irani, N., Remmers, J. J. C. & Deshpande, V. S., 2012

Research output: Contribution to conferencePosterAcademic

6 Citations (Scopus)

A discrete dislocation-transformation model for austenitic single crystals

Shi, J., Turteltaub, S. R., Giessen, van der, E. & Remmers, J. J. C., 2008, In : Modelling and Simulation in Materials Science and Engineering. 16, 5, p. 055005-1-055005-26

Research output: Contribution to journalArticleAcademicpeer-review

Transformation Model
Single Crystal
Dislocation
Dislocations (crystals)
Single crystals
77 Citations (Scopus)

A dissipation-based arc-length method for robust simulation of brittle and ductile failure

Verhoosel, C. V., Remmers, J. J. C. & Gutierrez, M. A., 2009, In : International Journal for Numerical Methods in Engineering. 77, 9, p. 1290-1321

Research output: Contribution to journalArticleAcademicpeer-review

Arc length
Energy release rate
Plasticity
Dissipation
Mechanics

Advances in delamination modeling of metal/polymer systems: continuum aspects

van der Sluis, O., Vossen, B. G., Neggers, J., Ruybalid, A. P., Chockalingam, K., Peerlings, R. H. J., Hoefnagels, J. P. M., Remmers, J. J. C., Kouznetsova, V., Schreurs, P. J. G. & Geers, M. G. D., 1 Sep 2018, Nanopackaging: nanotechnologies and electronics packaging. Morris, J. (ed.). Dordrecht: Springer, p. 83-128 46 p.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

adhesion
continuums
polymers
metals
parameter identification

A finite strain, partition of unity based cohesive zone formulation for propagating cracks in porous media

Irzal, F., Remmers, J. J. C., Huyghe, J. M. R. J., Borst, de, R. & Ito, K., 2010, IV European congress of Computational Mechanics (ECCM 2010) 16-21 May 2010, Paris France. France, Paris, p. 1038-1/2

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

A finite strain discrete dislocation plasticity model

Irani, N., Remmers, J. J. C. & Deshpande, V. S., 2014

Research output: Contribution to conferencePosterAcademic

Open Access
File

A finite strain discrete dislocation plasticity model

Irani, N., Remmers, J. J. C. & Deshpande, V. S., 2013

Research output: Contribution to conferencePosterAcademic

Open Access
File
34 Citations (Scopus)

A large deformation formulation for fluid flow in a progressively fracturing porous material

Irzal, F., Remmers, J. J. C., Huyghe, J. M. R. J. & Borst, de, R., 2013, In : Computer Methods in Applied Mechanics and Engineering. 256, p. 29-37 9 p.

Research output: Contribution to journalArticleAcademicpeer-review

fracturing
porous materials
fluid flow
Porous materials
Flow of fluids

A meso-scale model to study the compressive strength of woven carbon fiber reinforced plastics

Schormans, J. M. J., Remmers, J. J. C., Wilson, W. & Deshpande, V. S., 2016, ECCM 2016 - Proceedings of the 17th European Conference on Composite Materials, 26-30 June 2016, Munich, Germany. European Conference on Composite Materials, ECCM

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Carbon fiber reinforced plastics
Compressive strength
Fibers
Composite materials
Stiffness

A mixed hybrid formulation for 2D poroelasticity with discontinuity

Pizzocolo, F., Huyghe, J. M., Remmers, J. J. C., Ito, K. & de Borst, R., 1 Dec 2010, p. 1-8 8 p.

Research output: Contribution to conferencePaperAcademic

Flow of fluids
Structural integrity
Crack tips
Porous materials
Crack propagation

A mixed hybrid mixture formulation for 2D porous media

Pizzocolo, F., Huyghe, J. M. R. J., Ito, K. & Remmers, J. J. C., 2008

Research output: Contribution to conferencePosterAcademic

Open Access
File

A multi-phase cohesive segments method for the simulation of self-healing materials

Remmers, J. J. C. & Borst, de, R., 2008, Proceedings of the First International Conference on Self Healing Materials, Noordwijk, The Netherlands. Schmets, A. J. M. & Zwaag, van der, S. (eds.). Springer

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
healing
unity
mesh
partitions
cracks
33 Citations (Scopus)

Analysis of fracture and delamination in laminates using 3D numerical modelling

Cid Alfaro, M. V., Suiker, A. S. J., Borst, de, R. & Remmers, J. J. C., 2009, In : Engineering Fracture Mechanics. 76, 6, p. 761-780

Research output: Contribution to journalArticleAcademicpeer-review

Aluminum
Delamination
Laminates
Cracks
Plastics

An evaluation of the accuracy of discontinuous finite elements in explicit dynamic calculations

Remmers, J. J. C., de Borst, R. & Needleman, A., 2007, IUTAM Symposium on Discretization Methods for Evolving Discontinuities. Combescure, A., de Borst, R. & Belytschko, T. (eds.). Dordrecht: Springer, p. 303-322 20 p. (IUTAM Bookseries; vol. 5)

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

5 Citations (Scopus)

An investigation of the step-wise propagation of a mode-II fracture in a poroelastic medium

Remij, E. W., Remmers, J. J. C., Huyghe, J. M. & Smeulders, D. M. J., 1 Mar 2017, In : Mechanics Research Communications. 80, p. 10-15 6 p.

Research output: Contribution to journalArticleAcademicpeer-review

propagation
shear
Finite element method
shape functions
Pore pressure
1 Citation (Scopus)

An isogeometric analysis approach to fluid flow in a fractured porous medium

Irzal, F., Remmers, J. J. C., Verhoosel, C. V. & De Borst, R., 2013, Poromechanics V - Proceedings of the 5th Biot Conference on Poromechanics (in memory of Karl von Terzaghi, 1883-1963), July 10-12, 2013, Vienna, Austria. Hellmich, C. (ed.). New York: American Society of Civil Engineers (ASCE), p. 872-881 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Splines
Porous materials
Flow of fluids
Cracks
Data structures
30 Citations (Scopus)

An isogeometric analysis Bézier interface element for mechanical and poromechanical fracture problems

Irzal, F., Remmers, J. J. C., Verhoosel, C. V. & Borst, de, R., 2014, In : International Journal for Numerical Methods in Engineering. 97, 8, p. 608-628 21 p.

Research output: Contribution to journalArticleAcademicpeer-review

Isogeometric Analysis
Interface Element
Traction (friction)
Bézier
Stiffness
56 Citations (Scopus)

An isogeometric continuum shell element for non-linear analysis

Hosseini, S., Remmers, J. J. C., Verhoosel, C. V. & Borst, de, R., 2014, In : Computer Methods in Applied Mechanics and Engineering. 271, p. 1-22 22 p.

Research output: Contribution to journalArticleAcademicpeer-review

Nonlinear analysis
continuums
formulations
Splines
splines

An isogeometric solid-like shell element for non-linear analysis

Hosseini, S., Remmers, J. J. C., Verhoosel, C. V. & Borst, de, R., 2012

Research output: Contribution to conferencePosterAcademic

50 Citations (Scopus)

An isogeometric solid-like shell element for non-linear analysis

Hosseini, S., Remmers, J. J. C., Verhoosel, C. V. & Borst, de, R., 2013, In : International Journal for Numerical Methods in Engineering. 95, 3, p. 238-256 19 p.

Research output: Contribution to journalArticleAcademicpeer-review

Shell Element
Nonlinear analysis
Nonlinear Analysis
Shell
Splines

A numerical study on the effect of anisotropy and heterogeneity on hydraulic fractures

Valliappan, V., 20 Nov 2019, Eindhoven: Technische Universiteit Eindhoven. 132 p.

Research output: ThesisPhd Thesis 1 (Research TU/e / Graduation TU/e)Academic

Open Access
File
2 Citations (Scopus)

A numerical study on the effect of anisotropy on hydraulic fractures

Valliappan, V., Remmers, J. J. C., Barnhoorn, A. & Smeulders, D. M. J., Feb 2019, In : Rock Mechanics and Rock Engineering. 52 , 2, p. 591-609 19 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
hydraulics
anisotropy
propagation
fracturing
finite element method

A partition of unity based cohesive zone model for hydraulic fracturing

Remij, E. W., Remmers, J. J. C., Huyghe, J. M. R. J. & Smeulders, D. M. J., 2014, 11th World Congress on Computational Mechanics (WCCM XI), 20-25 July 2014, Barcelona, Spain. Barcelona: IACM / ECCOMAS

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

Open Access
File
8 Citations (Scopus)

A partition of unity-based model for crack nucleation and propagation in porous media, including orthotropic materials

Remij, E. W., Remmers, J. J. C., Pizzocolo, F., Smeulders, D. M. J. & Huyghe, J. M. R. J., 2014, In : Transport in Porous Media. 106, 3, p. 1-18 18 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Porous materials
Nucleation
Cracks
Crack propagation
Flow of fluids

A partition of unity based model for hydraulic fracturing

Remij, E. W., Remmers, J. J. C., Huyghe, J. M. R. J. & Smeulders, D. M. J., 2014, 76th EAGE Conference & Exhibition 2014, Amsterdam RAI, The Netherlands, 16-19 June 2014. AEGE

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

poroelasticity
Biot theory
fracture propagation
stress field
nucleation
27 Citations (Scopus)

A partition of unity-based multiscale approach for modelling fracture in piezoelectric ceramics

Verhoosel, C. V., Remmers, J. J. C. & Gutierrez, M. A., 2010, In : International Journal for Numerical Methods in Engineering. 82, 8, p. 966-994

Research output: Contribution to journalArticleAcademicpeer-review

Piezoelectric Ceramics
Partition of Unity
Piezoelectric ceramics
Cohesive Zone
Multiscale Methods

A phantom-node-based cohesive element formulation with coupled plasticity for the simulation of adhesive joints

Sarrado, C., Remmers, J. J. C. & Turon, A., 1 Jan 2015

Research output: Contribution to conferencePaperAcademic

Adhesive joints
Plasticity
Subroutines
Hardening
Adhesives

A précis of some recent developments in computational failure mechanics

Borst, de, R., Askes, H., Gutierrez, M. A., Remmers, J. J. C. & Wells, G. N., 2002, Proceedings of the Fifth World Congress on Computational Mechanics (WCCM V), July 7-12, 2002, Vienna, Austria. Mang, H. A., Rammerstorfer, F. G. & Eberhardsteiner, J. (eds.). Vienna: Vienna University of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

mechanics
numerical method
engineering
damage
methodology

A quantitative investigation of the competition between cohesive and adhesive fracture at interfaces

Remmers, J. J. C. & van der Sluis, O., 5 Jun 2015, 4th International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC2015), 3-5 June 2015, Cachan, France.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

65 Citations (Scopus)

A solid-like shell element allowing for arbitrary delaminations

Remmers, J. J. C., Wells, G. N. & Borst, de, R., 2003, In : International Journal for Numerical Methods in Engineering. 58, p. 2013-2040

Research output: Contribution to journalArticleAcademicpeer-review

Shell Element
Delamination
Finite Element
Arbitrary
Composite structures
2 Citations (Scopus)

A two-scale approach for propagating cracks in a fluid-saturated porous material

Irzal, F., Remmers, J. J. C., Huyghe, J. M., de Borst, R. & Ito, K., 2010, In : IOP Conference Series: Materials Science and Engineering. 10, 1, 10 p., 012044

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Porous materials
Cracks
Fluids
Constitutive equations
Nonlinear equations

Cohesive zone modeling for arbitrary crack growth in bulk material

Thurlings, M. A. C. & Remmers, J. J. C., 2012, Eindhoven: TU/e.

Research output: Book/ReportReportAcademic

77 Citations (Scopus)

Cohesive-zone models, higher-order continuum theories and reliability methods for computational failure analysis

Borst, de, R., Gutiérrez, M. A., Wells, G. N., Remmers, J. J. C. & Askes, H., 2004, In : International Journal for Numerical Methods in Engineering. 60, 1, p. 289-315

Research output: Contribution to journalArticleAcademicpeer-review

Cohesive Zone
Cohesive Zone Model
Failure Analysis
Computational Analysis
Failure analysis

Composites2015

Hallett, S. R. & Remmers, J. J. C., 1 Jan 2017, In : Composites. Part A: Applied Science and Manufacturing. 92, p. 145 1 p.

Research output: Contribution to journalEditorialAcademicpeer-review

Open Access
File

Computational Dynamics of Fast Crack Propagation

Borst, de, R. & Remmers, J. J. C., 2008, Euromech 498 Colloquium. Poland, Kazimierz Dolny

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

83 Citations (Scopus)

Computational homogenization for adhesive and cohesive failure in quasi-brittle solids

Verhoosel, C. V., Remmers, J. J. C., Gutierrez, M. A. & Borst, de, R., 2010, In : International Journal for Numerical Methods in Engineering. 83, 8-9, p. 1155-1179

Research output: Contribution to journalArticleAcademicpeer-review

Adhesives
Homogenization
Softening
Model
Demonstrate
67 Citations (Scopus)

Computational methods for debonding in composites

Borst, de, R. & Remmers, J. J. C., 2008, Mechanical response of composites. Camanho, P. P., Davila, C. G. & Pinho, S. T. (eds.). Berlin: Springer, p. 1-25 (Computational methods in applied sciences; vol. 10)

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

delamination
matrix
nonlinearity
method
shell

Computational methods for delamination fracture.

Remmers, J. J. C. & Borst, de, R., 2005, International Conference on Fracture XI. Italy, Politecnico di Torino, Torino

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

74 Citations (Scopus)

Computational modelling of delamination

Borst, de, R. & Remmers, J. J. C., 2006, In : Composites Science and Technology. 66, 6, p. 713-722

Research output: Contribution to journalArticleAcademicpeer-review

Delamination
Fracture energy
Composite structures
Stiffness

Cracks in osmoelastic porous media : fluid flow and crack growth alternate

Kraaijeveld, F., Huyghe, J. M. R. J., Remmers, J. J. C., Borst, de, R., Ito, K. & Baaijens, F. P. T., 2008

Research output: Contribution to conferencePosterAcademic

Open Access
File

Cracks in the degenerating disc: microscopic observation and partition of unity finite element simulation

Kraaijeveld, F., Huyghe, J. M. R. J., Dittmar, R., Remmers, J. J. C., Ito, K. & Borst, de, R., 2009, Poromechanics IV: Proceedings of the Fourth Biot Conference on Poromechanics. Ling, H. I., Smyth, A. & Betti, R. (eds.). Lancaster, PA, USA: DEStech publications, p. 89-93

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

Deformation and failure of woven and 3D composites

Schormans, J. M. J., 11 Oct 2018, Eindhoven: Technische Universiteit Eindhoven. 111 p.

Research output: ThesisPhd Thesis 1 (Research TU/e / Graduation TU/e)Academic

Open Access
File
66 Citations (Scopus)

Delamination buckling of fibre-metal laminates

Remmers, J. J. C. & Borst, de, R., 2001, In : Composites Science and Technology. 61, 15, p. 2207-2213

Research output: Contribution to journalArticleAcademicpeer-review

Delamination
Laminates
Buckling
Glare
Metals

Discontinuities in materials and structures: a unifying computational approach

Remmers, J. J. C., 2006, Delft: Delft University of Technology. 260 p.

Research output: ThesisPhd Thesis 4 Research NOT TU/e / Graduation NOT TU/e)Academic

Open Access
File
discontinuity
cracks
nucleation
metal fibers
propagation