If you made any changes in Pure these will be visible here soon.

Research Output 1999 2020

Filter
Conference contribution
2018
1 Downloads (Pure)

Crystal plasticity parameter identification by integrated DIC on microscopic topographies

Hoefnagels, J. P. M., Bertin, M., Du, C. & Hild, F., 2018, Residual Stress, Thermomechanics and Infrared Imaging, Hybrid Techniques and Inverse Problems: Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics. Baldi, A., Considine, J. M., Quinn, S. & Balandraud, X. (eds.). Berlin: Springer, Vol. 8. p. 47-49 3 p. (Conference Proceedings of the Society for Experimental Mechanics Series).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Topography
Plasticity
Identification (control systems)
Crystals
Focused ion beams
1 Citation (Scopus)
2 Downloads (Pure)

Mechanical shape correlation: a novel integrated digital image correlation approach

Kleinendorst, S. M., Hoefnagels, J. P. M. & Geers, M. G. D., 2018, Advancement of Optical Methods in Experimental Mechanics, Volume 3: Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics. Lamberti, L., Lin, M-T., Furlong, C. & Sciammarella, C. (eds.). Dordrecht: Springer, p. 47-54 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Speckle
Experiments
Correlation methods
Electronic equipment
Wire

Novel image correlation based techniques for mechanical analysis of MEMS

Kleinendorst, S. M., Borger, R. R. M., Hoefnagels, J. P. M. & Geers, M. G. D., 2018, Micro and nanomechanics. Starman, L. & Hay, J. (eds.). Cham: Springer, p. 19-28 10 p. (Conference Proceedings of the Society for Experimental Mechanics Series; no. 5).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Speckle
MEMS
Splines
46 Downloads (Pure)

On micromechanical parameter identification and the role of kinematic boundary conditions

Rokos, O., Hoefnagels, J. P. M., Peerlings, R. H. J. & Geers, M. G. D., 23 Mar 2018, Photomechanics 2018 (PM 2018), 20-22 march 2018, Toulouse, France. p. 109-110 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
boundary condition
kinematics
digital image
field of view
parameter
30 Downloads (Pure)

On micromechanical parameter identification and the role of kinematic boundary conditions in integrated digital image correlation

Rokos, O., Hoefnagels, J. P. M., Peerlings, R. H. J. & Geers, M. G. D., 28 Mar 2018, 16th European Mechanics and Materials Conference (EMMC 16), 26-28 March 2018, Nantes, France. 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
digital image
boundary condition
kinematics
parameter
1 Citation (Scopus)
2 Downloads (Pure)

On the boundary conditions and optimization methods in integrated digital image correlation

Kleinendorst, S. M., Verhaegh, B. J., Hoefnagels, J. P. M., Ruybalid, A., van der Sluis, O. & Geers, M. G. D., 2018, Advancement of Optical Methods in Experimental Mechanics, Volume 3: proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics. Lamberti, L., Lin, M-T., Furlong, C. & Sciammarella, C. (eds.). Dordrecht: Springer, p. 55-61 7 p. (Conference Proceedings of the Society for Experimental Mechanics Series book series (CPSEMS)).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Boundary conditions
Correlation methods
Newton-Raphson method
Switches
Derivatives
2017
2 Citations (Scopus)

Boundary mechanics in lath martensite, studied by uni-axial micro-tensile tests

Hoefnagels, J. P. M., Du, C. & Geers, M. G. D., 2017, Micro and Nanomechanics, Volume 5: Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics . Starman, L. V., Hay, J. & Karanjgaokar, N. (eds.). Dordrecht: Springer, p. 21-25 5 p. (Conference Proceedings of the Society for Experimental Mechanics Series ; vol. 2017).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Martensite
Plasticity
Mechanics
Trace analysis
Tensile testing
9 Downloads (Pure)

Full-field identification methods: comparison of FEM updating and integrated DIC

Ruybalid, A. P., Hoefnagels, J. P. M., van der Sluis, O. & Geers, M. G. D., 2017, Advancement of Optical Methods in Experimental Mechanics, Volume 3: Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics. Yoshida, S., Lamberti, L. & Siammarella, C. (eds.). Dordrecht: Springer, p. 191-197 7 p. (Conference Proceedings of the Society for Experimental Mechanics Series ; vol. 2017).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Finite element method
Systematic errors
Constitutive models
Set theory
Kinematics
8 Downloads (Pure)

Full-field identification of interfaces in microelectronic devices

Ruybalid, A. P., Hoefnagels, J. P. M., van der Sluis, O. & Geers, M. G. D., 2017, Micro and Nanomechanics, Volume 5: Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics. Starman, L. V., Hay, J. & Karanjgaokar, N. (eds.). Dordrecht: Springer, p. 9-13 5 p. (Conference Proceedings of the Society for Experimental Mechanics Series ; vol. 2017).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Microelectronics
Light emitting diodes
Kinematics
Correlation methods
Hinges
6 Downloads (Pure)

Self-adaptive isogeometric global digital image correlation and digital height correlation

Hoefnagels, J. P. M., Kleinendorst, S. M., Ruybalid, A. P., Verhoosel, C. V. & Geers, M. G. D., 2017, Advancement of Optical Methods in Experimental Mechanics - Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics. Yoshida, S., Lamberti, L. & Sciammarella, C. (eds.). Springer, Vol. 3. p. 165-172 8 p. (Conference Proceedings of the Society for Experimental Mechanics Series).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Kinematics
Splines
Electronic structure
Geometry
Experiments
23 Downloads (Pure)

The role of kinematic boundary conditions and their (in)accuracy in micromechanical parameter identification

Rokoš, O., Hoefnagels, J. P. M., Peerlings, R. H. J. & Geers, M. G. D., 9 Nov 2017, Computational modeling of complex materials across the scales (CMCS).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
numerical method
boundary condition
kinematics
parameter

Unraveling the apparent ductility of lath martensite

Geers, M. G. D., Du, C., Maresca, F., Kouznetsova, V. G., Hoefnagels, J. P. M. & Curtin, W. A., 18 Jun 2017, 14th International Conference on Fracture. p. 542-543 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Martensite
Austenite
Plasticity
Ductility
Plastics
2016
5 Downloads (Pure)

A statistical/computational/experimental approach to study the microstructural morphology of damage

Hoefnagels, J. P. M., Du, C., de Geus, T. W. J., Peerlings, R. H. J. & Geers, M. G. D., 2016, Fracture, Fatigue, Failure and damage Evolution, Vol. 8: Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics. Beese, A. M., Zehnder, A. T. & Xia, S. (eds.). Berlin: Springer, p. 61-65 (Conference Proceedings of the Society for Experimental Mechanics Series).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

6 Downloads (Pure)

Performance assessment of integrated digital image correlation versus FEM updating

Ruybalid, A. P., Hoefnagels, J. P. M., van der Sluis, O. & Geers, M. G. D., 2016, Conference Proceedings of the Society for Experimental Mechanics Series. Springer, Vol. 9. p. 11-15 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Interpolation
Finite element method
Experiments
2015
5 Downloads (Pure)

A generic, time-resolved, integrated digital image correlation, identification approach

Hoefnagels, J. P. M., Neggers, J., Blaysat, B., Hild, F. & Geers, M. G. D., 2015, Advancement of Optical Methods in Experimental Mechanics - Proceedings of the 2014 Annual Conference on Experimental and Applied Mechanics. Jin, H., Sciammarella, C., Yoshida, S. & Lamberti, L. (eds.). New York: Springer, Vol. 3B. p. 257-263 7 p. (Conference proceedings of the Society for Experimental Mechanics series; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Identification (control systems)
Finite element method
Constitutive models
Delamination
Materials properties

High toughness fibrillating interfaces in stretchable electronics a multi-scale numerical and experimental analysis.

van der Sluis, O., Vossen, B. G., Neggers, J., Hoefnagels, J. P. M., Schreurs, P. J. G. & Geers, M. G. D., 5 Jun 2015, 4th International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC2015), 3-5 June 2015, Cachan, France.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2014
1 Downloads (Pure)

Anelasticity in Al-alloy thin films: a micro-mechanical analysis

Hoefnagels, J. P. M., Bergers, L. I. J. C. & Geers, M. G. D., 2014, Fracture, Fatigue, Failure and Damage Evolution, Volume 5. Proceedings of the 2014 Annual Conference on Experimental and Applied Mechanics. J. Carrol, X. & S. Daly, X. (eds.). Heidelberg: Springer, p. 107-112 (Conference proceedings of the Society for Experimental Mechanics series).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Thin films
MEMS
Aluminum alloys
Testing

Multi-scale mechanical analysis of high-toughness metal-elastomer interfaces

Hoefnagels, J. P. M., Neggers, J., van der Sluis, O. & Geers, M. G. D., 2014, 20th European Conference on Fracture - Fracture at all scales (ECF20), 30 Juni-4 Juli Trondheim, Norway. Zang, Z., Skallerud, B., Thaulow, C., Østby, E. & He, J. (eds.). Trondheim: NTNU / ESIS

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2013
1 Downloads (Pure)

A new procedure for the identification of the delamination phenomena

Blaysat, B., Hoefnagels, J. P. M., Lubineau, G. & Geers, M. G. D., 2013, Proceedings of PhotoMechanics 2013 – International conference on full-field measurement techniques and their applications in experimental solid mechanics 27-19 May 2013, Montpellier, France. Chrysochoos, A., Louche, H. & Wattrisse, B. (eds.). p. USB flash drive-

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Delamination
Kinematics
1 Downloads (Pure)

Direct stress-strain measurement for bulged membranes

Neggers, J., Hoefnagels, J. P. M., Hild, F., Roux, S. & Geers, M. G. D., 2013, Proceedings of PhotoMechanics 2013 : International Conference on Full-Field Measurement Techniques and their Applications in Experimental Solid Mechanics, 27-29 May 2013, Montpellier, France. Chrysochoos, A., Louche, H. & Wattrisse, B. (eds.). p. USB flash drive-

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Strain measurement
Stress measurement
Membranes
Correlation methods
Systematic errors
2 Downloads (Pure)

Full-field stress-strain mapping of micron-sized structures using FEM-based integrated global digital image correlation

Hoefnagels, J. P. M., Neggers, J., Hild, F., Roux, S., Beeck, van, J. & Geers, M. G. D., 2013, Proceedings of PhotoMechanics 2013 – International conference on full-field measurement techniques and their applications in experimental solid mechanics 27-19 May 2013, Montpellier, France. Chrysochoos, A., Louche, H. & Wattrisse, B. (eds.). p. USB flash drive-

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

digital image
stress field
substrate
methodology
46 Downloads (Pure)

Integrated global digital image correlation for interface delamination characterization

Hoefnagels, J. P. M., Blaysat, B., Lubineau, G. & Geers, M. G. D., 2013, Proceedings of the 2013 Annual Conference on Experimental and Applied Mechanics. Carroll, J. (ed.). New York: Springer, p. 27-32 (Fracture and Fatigue; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Delamination
Dissimilar materials
Experiments
Crack initiation
Microelectronics
31 Downloads (Pure)

Une nouvelle procédure d’identification des paramètres de lois cohésives

Blaysat, B., Hoefnagels, J. P. M., Lubineau, G. & Geers, M. G. D., 2013, Proceedings of the 11ème Colloque National en Calcul des Structures (CSMA), 13-15 May 2013, Giens, France.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
simulation
2012
84 Downloads (Pure)

A global digital image correlation enhanced full-field bulge test method

Neggers, J., Hoefnagels, J. P. M., Hild, F., Roux, S. & Geers, M. G. D., 2012, Proceedings IUTAM Symposium on Full-field Measurements and Identification in Solid Mechanics, 4-8 July 2011, Cachan, France. Espinosa, H. & Hild, F. (eds.). Amsterdam: Elsevier, p. 73-81

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
digital image
curvature
membrane
method
test

Analysis of micro-scale dissipation mechanisms of ductile interfaces

Neggers, J., Hoefnagels, J. P. M., Sluis, van der, O., Vossen, B. G. & Geers, M. G. D., 2012, Proceedings of the 8th European Solid Mechanics Conference (ESMC12), 9-13 July 2012, Graz, Austria. Holzapfel, G. A. & Ogden, R. W. (eds.). p. 34505-

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

1 Downloads (Pure)

Experimental-numerical analysis of microscopic dissipation mechanisms of ductile interfaces

Hoefnagels, J. P. M., Neggers, J., Sluis, van der, O., Vossen, B. G. & Geers, M. G. D., 2012, Proceedings of the 15th International Conference on Experimental Mechanics (ICEM15), 22-27 July 2012, Porto, Portugal. Silva Gomes, J. F. & Vaz, M. A. P. (eds.). p. 3118-789

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Full-field stress and strain measurement in (structured) membranes

Hoefnagels, J. P. M., Neggers, J., Roux, S., Hild, F. & Geers, M. G. D., 2012, Proceedings of the 15th International Conference on Experimental Mechanics (ICEM15), 22-27 July 2012, Porto, Portugal. Silva Gomes, J. F. & Vaz, M. A. P. (eds.). p. 3119-425

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

1 Citation (Scopus)
57 Downloads (Pure)

Global digital image correlation for pressure deflected membranes

Neggers, J., Hoefnagels, J. P. M., Hild, F., Roux, S. & Geers, M. G. D., 2012, Proceedings of the 2012 Annual Conference on Experimental and Applied Mechanics. Shaw, G. A., Prorok, B. C. & Starman, L-VA. (eds.). New York: Springer, p. 135-140 (MEMS and Nanotechnology; vol. 6).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Membranes
Correlation methods
Kinematics
Geometry
Testing
2 Downloads (Pure)

In-situ experimental-numerical characterization of interface delamination

Hoefnagels, J. P. M., Kolluri, M., Dommelen, van, J. A. W. & Geers, M. G. D., 2012, Proceedings of the 8th European Solid Mechanics Conference (ESMC12), 9-13 July 2012, Graz, Austria. Holzapfel, G. A. & Ogden, R. W. (eds.). p. 10001-

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Delamination
Dissimilar materials
Crack initiation
Microelectronics
Crack propagation
1 Citation (Scopus)
36 Downloads (Pure)

Micromechanical characterization of ductile damage in DP steel

Hoefnagels, J. P. M., Tasan, C. C., Peters, F. J. & Geers, M. G. D., 2012, Proceedings of the 2012 Annual Conference on Experimental and Applied Mechanics. Ventura, C. E., Crone, W. C. & Furlong, C. (eds.). New York: Springer, p. 29-36 (Experimental and Applied Mechanics; vol. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Microstructure
Steel
Scanning electron microscopy
Ductile fracture
High strength steel

Towards full-field stress and strain measurement in structured membranes

Hoefnagels, J. P. M., Neggers, J., Roux, S., Hild, F. & Geers, M. G. D., 2012, Proceedings of the 8th European Solid Mechanics Conference (ESMC12), 9-13 July 2012, Graz, Austria. Holzapfel, G. A. & Ogden, R. W. (eds.). p. 89340-

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Strain measurement
Stress measurement
Membranes
Correlation methods
Systematic errors
2011
4 Citations (Scopus)
28 Downloads (Pure)

A miniaturized contactless pure-bending device for in-situ SEM failure analysis

Hoefnagels, J. P. M., Buizer, C. A. & Geers, M. G. D., 2011, Proceedings of the 2011 Annual Conference on Experimental and Applied Mechanics. Proulx, T. (ed.). New York: Springer, p. 587-596 (Experimental and Applied Mechanics; vol. 6).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
failure analysis
rubber
scanning electron microscopy
roughness
metals
34 Downloads (Pure)

A nano-tensile tester for creep studies

Bergers, L. I. J. C., Hoefnagels, J. P. M., Dekkers, E. C. A. & Geers, M. G. D., 2011, Proceedings of the 2011 Annual Conference on Experimental and Applied Mechanics. Proulx, T. (ed.). New York: Springer, p. 25-29 (MEMS and Nanotechnology; vol. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
test equipment
rubber
roughness
metals
fibrillation
1 Citation (Scopus)
29 Downloads (Pure)

An in-situ experimental-numerical approach for interface delamination characterization

Hoefnagels, J. P. M., Murthy Kolluri, N. V. V. R., Dommelen, van, J. A. W. & Geers, M. G. D., 2011, Proceedings of the 2011 Annual Conference on Experimental and Applied Mechanics. Proulx, T. (ed.). New York: Springer, p. 569-576 (Experimental and Applied Mechanics; vol. 6).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
rubber
roughness
metals
fibrillation
matrices

An in-situ experimental-numerical approach for interface delamination characterization

Hoefnagels, J. P. M., Murthy Kolluri, N. V. V. R., Dommelen, van, J. A. W. & Geers, M. G. D., 2011, Proceedings of the European Congress and Exhibition on Advanced Materials and Processes (Euromat 2011), 12-15 September 2011, Montpellier, France. p. D22-O-2-6-1668

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

42 Downloads (Pure)

Creep measurements in free-standing thin metal film micro-cantilever bending

Bergers, L. I. J. C., Hoefnagels, J. P. M. & Geers, M. G. D., 2011, MEMS and Nanotechnology, Volume 4: Proceedings of the 2011 Annual Conference on Experimental and Applied Mechanics. Proulx, T. (ed.). New York: Springer, p. 167-171 (MEMS and Nanotechnology; vol. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
metal films
rubber
roughness
metals
fibrillation
24 Downloads (Pure)

Full-field bulge testing using global digital image correlation

Neggers, J., Hoefnagels, J. P. M., Hild, F., Roux, S. & Geers, M. G. D., 2011, MEMS and Nanotechnology, Volume 4: Proceedings of the 2011 Annual Conference on Experimental and Applied Mechanics. Proulx, T. (ed.). New York: Springer, p. 99-103

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
digital image
membrane
deflection
curvature
microscopy

Interface delamination in stretchable electronics : an in-situ SEM study

Hoefnagels, J. P. M., Neggers, J., Sedaghat, O., Sluis, van der, O. & Geers, M. G. D., 2011, Proceedings of the European Congress and Exhibition on Advanced Materials and Processes (Euromat 2011), 12-15 September 2011, Montpellier, France. p. D22-O-6-1-1672

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

1 Citation (Scopus)
48 Downloads (Pure)

Interface integrity in stretchable electronics

Neggers, J., Hoefnagels, J. P. M., Sluis, van der, O., Sedaghat, O. & Geers, M. G. D., 2011, Proceedings of the 2011 Annual Conference on Experimental and Applied Mechanics. Proulx, T. (ed.). New York: Springer, p. 577-581 (Experimental and Applied Mechanics; vol. 6).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
integrity
rubber
electronics
roughness
metals
64 Downloads (Pure)

Mechanically probing time-dependent mechanics in metallic MEMS

Hoefnagels, J. P. M., Bergers, L. I. J. C., Delhey, N. K. R. & Geers, M. G. D., 2011, MEMS and Nanotechnology - Proceedings of the 2010 Annual Conference on Experimental and Applied Mechanics. Proulx, T. (ed.). New York: Springer, Vol. 2. p. 43-48 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
MEMS
Mechanics
Creep
Deflection (structures)
Profilometry
35 Downloads (Pure)

Size-effects in time-dependent mechanics of Al-Cu MEMS

Bergers, L. I. J. C., Hoefnagels, J. P. M. & Geers, M. G. D., 2011, Proceedings of Euromat 2011, 12-15 September 2011, Montpellier, France. p. D21-O-6-2-1694/1

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

Open Access
File
39 Downloads (Pure)

Tensile testing at the nano-scale

Bergers, L. I. J. C., Hoefnagels, J. P. M. & Geers, M. G. D., 2011, Proceedings of Euromat 2011, 12-15 September 2011, Montpellier, France. p. D22-O-3-4-1702/1-2

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

Open Access
File
2010

An advanced experimental approach for detailed in-situ characterization of interface delamination

Kolluri, M., Hoefnagels, J. P. M., Van Dommelen, J. A. W. & Geers, M. G. D., 2010, 18th European Conference on Fracture : Fracture of Materials and Structures from Micro to Macro Scale .

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

26 Downloads (Pure)

An advanced experimental approach for detailed in-situ characterization of interface delamination

Hoefnagels, J. P. M., Murthy Kolluri, N. V. V. R., Dommelen, van, J. A. W. & Geers, M. G. D., 2010, ICEM 14 – 14th International Conference on Experimental Mechanics. Bremand, F. (ed.). France: EDP Sciences, p. 42011- (EPJ Web of Conferences; vol. 6).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
49 Downloads (Pure)

An advanced experimental approach for detailed in-situ characterization of interface delamination

Murthy Kolluri, N. V. V. R., Hoefnagels, J. P. M., Dommelen, van, J. A. W. & Geers, M. G. D., 2010, Proceedings of the 16th US National Congress of Theoretical and Applied Mechanics, 27 June - 2 July 2010, State College, Pennsylvania, USA. Kyriakides, S. (ed.). p. USNCTAM2010-860

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
27 Downloads (Pure)

An in-situ experimental-numerical approach for detailed characterization of interface delamination properties

Hoefnagels, J. P. M., Murthy Kolluri, N. V. V. R., Dommelen, van, J. A. W. & Geers, M. G. D., 2010, Proceedings of the IVth European Conference on Computational Mechanics (ECCM2010), 16-21 May 2010, Paris, France. Allix, O. & Wriggers, P. (eds.). p. 1-2

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
46 Downloads (Pure)

Applicability of the bulge equations in plane strain bulge experiments

Neggers, J., Hoefnagels, J. P. M. & Geers, M. G. D., 2010, ICEM 14 – 14th International Conference on Experimental Mechanics. Bremand, F. (ed.). France: EDP Sciences, p. 40004- (EPJ Web of Conferences; vol. 6).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
26 Downloads (Pure)

Characterizing time-dependent mechanics in metallic MEMS

Bergers, L. I. J. C., Delhey, N. K. R., Hoefnagels, J. P. M. & Geers, M. G. D., 2010, ICEM 14 – 14th International Conference on Experimental Mechanics. Bremand, F. (ed.). France: EDP Sciences, p. 40002- (EPJ Web of Conferences; vol. 6).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
48 Downloads (Pure)

Computational mechanics of material interfaces : trends and challenges

Geers, M. G. D., Samimi, M., Dommelen, van, J. A. W., Peerlings, R. H. J. & Hoefnagels, J. P. M., 2010, Proceedings of the IVth European Conference on Computational Mechanics (ECCM2010), 16-21 May 2010, Paris, France. Allix, O. & Wriggers, P. (eds.). France, Paris

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
43 Downloads (Pure)

Copper-rubber interface delamination in stretchable electronics

Hoefnagels, J. P. M., Neggers, J., Timmermans, P. H. M. & Geers, M. G. D., 2010, Proceedings of the 16th US National Congress of Theoretical and Applied Mechanics, 27 June - 2 July 2010, State College, Pennsylvania, USA. Kyriakides, S. (ed.). p. USNCTAM-758

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File