• 489 Citations
1987 …2019
If you made any changes in Pure these will be visible here soon.

Research Output 1987 2019

Filter
Conference contribution
2019
4 Downloads (Pure)

Added value of regular in-service visual inspection to the fatigue reliability of structural details in steel bridges

Hashemi, S., Maljaars, J. & Snijder, B., 2019, 5th International Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures – SMAR 2019: Proceedings.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Steel bridges
Inspection
Fatigue of materials
Crack detection
Steel structures

Evaluation of clamping force in hot-driven rivets of the Botlekbrug

Leonetti, D., Maljaars, J. & Snijder, B., 2019, Proceedings of the Belgian-Dutch IABSE Young Engineers Colloquium 2019, YEC 2019. De Pauw, B., Leonetti, D., Snijder, H. H. & De Pauw, B. (eds.). Belgian and Dutch National Groups of IABSE, p. 76-77 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Rivets
Fatigue of materials
Bolted joints
Steel structures
Stress concentration

Probabilistic approach to evaluate fatigue safety status in steel railway bridges

Hashemi, B., Maljaars, J. & Snijder, B., 2019, Proceedings of the Belgian-Dutch IABSE Young Engineers Colloquium 2019, YEC 2019. De Pauw, B., Leonetti, D., Snijder, H. H. & De Pauw, B. (eds.). Belgian and Dutch National Groups of IABSE, p. 36-37 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Steel bridges
Sensitivity analysis
Fatigue of materials
Steel

Rainwater ponding on roof structures with interaction between main girders and purlins

Snijder, B. & Wijte, S., 2019, 20th Congress of IABSE New York City 2019: The Evolving Metropolis - Report. Zurich: International Association for Bridge and Structural Engineering, p. 150-157 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Ponding
Beams and girders
Roofs
Rain
Climate change

Stability interaction effects in 3D steel frames: a case study

Snijder, B., Titulaer, L. H. J. D., Teeuwen, P. A. & Hofmeyer, H., 2019, Proceedings of the International Colloquia on Stability and Ductility of Steel Structures (SDSS 2019), September 11-13, 2019, Prague, Czech Republic. Wald, F. & Jandera, M. (eds.). Boca Raton: CRC Press Taylor & Francis Group, p. 1025-1033 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Finite element method
Steel
Stiffness
Computer simulation
Experiments
2018
92 Downloads (Pure)

Partial factors for fatigue loads in the Eurocode system for road bridge design

Hashemi, S. B., Maljaars, J. & Snijder, H. H., 15 Jun 2018, Safety and Reliability - Safe Societies in a Changing World: Proceedings of ESREL 2018. Haugen, S., Barros, A., Van Gulijk, C., Kongsvik, T. & Vinnem, J. E. (eds.). 1st ed. London: Taylor and Francis Ltd., p. 2339-2345 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Fatigue of materials
Weigh-in-motion (WIM)
Steel bridges
Fatigue damage
Reliability analysis
575 Downloads (Pure)

Repair, strengthening and upgrading of steel bridges in The Netherlands

Snijder, H. H. & Hesselink, B. H., 2018, Engineering the Future : Proceedings of the 39th IABSE Symposium, 21-23 September 2017, Vancouver, Canada . s.l.: International Association for Bridge and Structural Engineering, p. 1177-1184 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Steel bridges
Repair
Fatigue damage
Fatigue of materials
44 Downloads (Pure)

Representativeness of compressed flange behaviour for trapezoidal steel sheeting under combined web crippling and bending

Hofmeyer, H., Vervoort, E. M. C., Snijder, H. H. & Maljaars, J., 2018, Proceedings Eight International Conference on Thin-Walled Structures ICTWS 2018, July 24-27, 2018, Lisbon, Portugal. 20 p. 22

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
2017
219 Downloads (Pure)

Bending-shear interaction of steel I-shaped cross-sections: statistical evaluation

Dekker, R. W. A., Snijder, H. H. & Maljaars, J., 2017, 8th European Conference on Steel and Composite Structures (EUROSTEEL 2017), September 13-15, 2017, Copenhagen, Denmark. p. 3699–3708 10 p. (CE/Papers; vol. 1, no. 2-3).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Strain hardening
Steel
Yield stress
Numerical models
Statistical methods
105 Downloads (Pure)

Compatibility of S-N and crack growth curves in the fatigue reliability assessment of a welded steel joint

Hashemi, S. B., Maljaars, J., Leonetti, D. & Snijder, H. H., 6 Sep 2017, Procedia Structural Integrity. Vol. 5. p. 959-966 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Crack propagation
Fatigue of materials
Steel
Miners
Reliability analysis
53 Downloads (Pure)

Developments in matrials codes and applications of steel structures

Snijder, H. H., 2017, Stahlbau, Holzbau und Verbundbau – Festschrift zum 60. Geburtstag von Univ.-Prof. Dr.-Ing. Ulrike Kuhlmann. Stuttgart: Institut für Konstruktion und Entwurf, Universität Stuttgart, Wilhelm Ernst & Sohn, p. 164-175 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Steel structures
High strength steel

Extended design method for in-plane stability of haunched sway portal frames

van Hove, B. W. E. M., Snijder, H. H., Hofmeyer, H. & Altinga, N., 2017, 8th European Conference on Steel and Composite Structures (EUROSTEEL 2017), September 13-15, 2017, Copenhagen, Denmark. p. 1344-1352 (CE/Papers; vol. 1, no. 2-3).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Stiffness
Buckling
Amplification
Geometry
Steel
320 Downloads (Pure)

Net cross-section failure of steel plates at bolt holes: numerical work and statistical assessment of design rules

Snijder, H. H., Dekker, R. W. A. & Teeuwen, P. A., 2017, 8th European Conference on Steel and Composite Structures (EUROSTEEL 2017), September 13-15, 2017, Copenhagen, Denmark. p. 3679–3688 10 p. (CE/Papers; vol. 1, no. 2-3).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Bolts
Steel
Strain hardening
Numerical models
921 Downloads (Pure)

Recent developments regarding the next version of Eurocode 3 Part 1-1 on steel structures

Snijder, H. H., Nov 2017, XI Congresso de Constução Metálica e Mista (XI Conference on Steel and Composite Construction). Simões da Silva, L., Vila Real, P., Piloto, P. & Martins, J. P. (eds.). Coimbra, Portugal: CMM Associação Portuguesa de Construção Metálica e Mista, p. 514-538 22 p. (Ce/papers; vol. 1, no. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Steel structures
104 Downloads (Pure)

Safety assessment across modes driven by plasticity, stability and fracture

Simoes da Silva, L., Tankova, T., Marques, L., Kuhlmann, U., Kleiner, A., Spiegler, J., Snijder, H. H., Dekker, R. W. A., Taras, A. & Popa, N., 2017, 8th European Conference on Steel and Composite Structures (EUROSTEEL 2017), September 13-15, 2017, Copenhagen, Denmark. p. 3689–3698 10 p. (CE/Papers; vol. 1, no. 2-3).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Plasticity
Steel structures
Failure modes
Steel
Ductility
2016
2 Citations (Scopus)
114 Downloads (Pure)

Design imperfections for steel beam lateral torsional buckling

Snijder, H. H., van der Aa, R. P., Hofmeyer, H. & van Hove, B. W. E. M., 2016, Proceedings of the International Colloquium on Stability and Ductility of Steel Structures. Dubina, D. & Ungureanu, V. (eds.). Timisoara: Wiley Ernst & Sohn, p. 549-556 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Buckling
Torsional stress
Defects
Steel
54 Downloads (Pure)

Numerical investigation into strong axis bending-shear interaction in rolled I-shaped steel sections

Dekker, R. W. A., Snijder, H. H. & Maljaars, J., 2016, Proceedings of the International Colloquium on Stability and Ductility of Steel Structures. Dubina, D. & Ungureanu, V. (eds.). Timisoara: Wiley Ernst & Sohn, p. 461-468 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Steel
Bending tests
Yield stress
Numerical models
1 Citation (Scopus)
37 Downloads (Pure)

Recalculation and strengthening of the double arch bridge

Alphen, S. V., Steenbrink, A., Blom, A., Hesselink, B. H. & Snijder, H. H., 2016, Proceedings: "IABSE Congress, Stockholm, 2016, Challenges in Design and Construction of an Innovative and Sustainable Built Environment, Report": 19th Congress of IABSE, Stockholm, September 21 - 23, 2016. International Association for Bridge and Structural Engineering, p. 223-230 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Arch bridges
Steel bridges
Public works
Water management
Fatigue damage
2 Citations (Scopus)
97 Downloads (Pure)

Strength and stability of traditional timber frames

Jorissen, A. J. M., Dorlijn, J. & Snijder, H. H., Aug 2016, Proceedings of the World Conference on Timber Engineering, 22-25 August 2016, Vienna, Austria. p. 1-8 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

Open Access
File
2015
1 Downloads (Pure)

Experimental study into bending-shear interaction of rolled I-shaped sections

Dekker, R. W. A., Snijder, H. H. & Maljaars, J., Sep 2015, 13th Nordic Steel Construction Conference (NSCC-2015), 23-25 September 2015, Tampere, Finland. Heinisuo, M. & Mäkinen, J. (eds.). Tampere: Tampere University of Technology, p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

441 Downloads (Pure)

The next version of part 1-1 of Eurocode 3 on steel structures: needs for an update and amendments

Snijder, H. H., 2015, Construieşte cu “STEEL”, Build with Steel, Lucrările celei de-a XIV-a Conferinţe Naţională de Construcţii Metalice (Proceedings of the 14th National Conference on Metal Structures), 23-25 September 2015, Cluj-Napoca, Romania. Nagy, Z. & Câmpian, C. (eds.). p. 33-63 31 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Steel structures
2014
92 Downloads (Pure)

A slender transparent glass supported high-strength steel column

Snijder, H. H., Dierks, D., Huveners, E. M. P. & Spoorenberg, R. C., 2014, IABSE Symposium Madrid 2014, Engineering for Progress, Nature and People, 3-5 September 2014, Madrid, Spain. Zurich: International Association for Bridge and Structural Engineering, p. 488-489 and full 8 pages paper on CD

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
29 Downloads (Pure)

Bending-shear interaction of I-shaped cross-sections : preliminary experimental research to verify the EC3 design rule

Snijder, H. H., Dekker, R. W. A. & Saric, I., 2014, Eurosteel 2014 – 7th European Conference on Steel and Composite Structures, 10-12 September 2014, naples, Italy. Landolfo, R. & Mazzolani, F. M. (eds.). Brussels: ECCS European Convention for Constructional Steelwork, p. 1039-1040 and full 6 pages paper on USB-stick

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
57 Downloads (Pure)

Harmonization of the safety level of design rules for steel structures : from ductile to brittle failure modes

Taras, A., Simoes da Silva, L., Marques, L., Kuhlmann, U. & Snijder, H. H., 2014, Eurosteel 2014 – 7th European Conference on Steel and Composite Structures, 10-12 September 2014, Naples, Italy. Landolfo, R. & Mazzolani, F. M. (eds.). Brussels: ECCS European Convention for Constructional Steelwork, p. 1037-1038

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
76 Downloads (Pure)

Investigation of the net cross-section failure mechanism : experimental research

Rombouts, I. M. J., Francken, W. L., Dekker, R. W. A. & Snijder, H. H., 2014, Eurosteel 2014 – 7th European Conference on Steel and Composite Structures, 10-12 September 2014, Naples, Italy. Landolfo, R. & Mazzolani, F. M. (eds.). Brussels: ECCS European Convention for Constructional Steelwork, p. 267-268 and full 6 pages paper on USB-stick

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
2 Citations (Scopus)
205 Downloads (Pure)

Numerical simulation of fatigue crack growth rate and crack retardation due to an overload using a cohesive zone model

Silitonga, S., Maljaars, J., Soetens, F. & Snijder, H. H., 2014, 11th International Fatigue Congress, 2-7 March 2014,. Clark, G. & Wang, C. H. (eds.). Switzerland: Trans Tech Publications, p. 777-783 (Advanced Materials Research; vol. 891-892).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
2013
1 Citation (Scopus)
53 Downloads (Pure)

Fatigue of threaded rods in cable anchorages due to vortex shedding

Snijder, H. H. & Maljaars, J., 2013, 36th IABSE Symposium, 24-27 September 2013, Kolkata. Zurich: International Association for Bridge and Structural Engineering, p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File

Parametric design and calculation of circular and elliptical tensegrity domes

Beetz, J., Telgen, van, M. V., Snijder, H. H. & Habraken, A. P. H. W., 2013, IASS 2013 Symposium The International Association for Shell and Spatial Structures( IASS), 23-27 September 2013, Wroclaw. Wroclaw, Poland

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2012
1 Downloads (Pure)

Cold-bent laminated glass and steel canopy for a bus station next to Amsterdam Central Station

Vakar, L. I., Van Wolfswinkel, J. C. & Snijder, H. H., 2012, Proceedings of the 18th IABSE Congress on Innovative Infrastructures - Toward Human Urbanism, 19-21 September, Seoul, Korea. Zürich: International Association for Bridge and Structural Engineering, Vol. 2. p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Composite action of steel frames and precast concrete infill panels with corner connections – Part 1 : experiments

Hoenderkamp, J. C. D., Snijder, H. H. & Hofmeyer, H., 2012, Proceedings of the 10th International Conference on Advances in Steel Concrete Composite and Hybrid Structure, 2-4 July, 2012, Singapore. Liew, J. Y. R. & Lee, S. C. (eds.). Singapore / India: Research Publishing, p. 702-709

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Precast concrete
Steel
Composite materials
Flanges
Experiments

Composite action of steel frames and precast concrete infill panels with corner connections – Part 2 : finite element analysis

Hoenderkamp, J. C. D., Hofmeyer, H. & Snijder, H. H., 2012, Proceedings of the 10th International Conference on Advances in Steel Concrete Composite and Hybrid Structure, 2-4 July, 2012, Singapore. Liew, J. Y. R. & Lee, S. C. (eds.). Singapore / India: Research Publishing, p. 710-717

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Precast concrete
Finite element method
Steel
Composite materials
Stiffness
22 Downloads (Pure)

Numerical simulation of stable fatigue crack growth rate using a cohesive zone model

Silitonga, S., Maljaars, J., Soetens, F. & Snijder, H. H., 2012, Proceedings of theEuropean Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), 10-14 September 2012, Vienna, Austria. Eberhardsteiner, J. & et al., X. (eds.). Vienna, p. 1-13

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
1 Downloads (Pure)

Out-of-plane buckling of roller bent wide flange arches - imperfections and finite element modeling

Spoorenberg, R. C., Snijder, H. H., Hoenderkamp, J. C. D. & Beg, D., 2012, Proceedings of seventh International Conference on Advances in Steel Structures. Chan, S. L. & Shu, G. P. (eds.). Nanjing: Southeast University Press, p. 1355-1362

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Arches
Flanges
Buckling
Defects
Residual stresses
2011
50 Downloads (Pure)

Buckling length factors for welded lattice girders with hollow section braces and chords

Snijder, H. H., Boel, H. D., Hoenderkamp, J. C. D. & Spoorenberg, R. C., 2011, Proceedings of the 6th European Conference on Steel and Composite Structures (Eurosteel 2011), 31 August - 2 September 2011, Budapest, Hungary. Dunai, L., Iványi, M., Jármai, K., Kovács, N. & Vigh, L. G. (eds.). Brussels: ECCS, p. 1881-1886

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
107 Downloads (Pure)

Dynamic Analysis of the Rotterdam Central Station Footbridge

Breman, C., Stuit, H. G. & Snijder, H. H., 2011, Proceedings of the 4th International Footbridge Conference, 6-8 July 2011, Wroclaw, Poland. Biliszczuk, J., Bien, J., Hawryszkow, P. & Kaminski, T. (eds.). Wroclaw: DWE (Dolnoslaskie Wydawnictwo Edukacyjne, p. 1075-1084

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
2 Downloads (Pure)

Steel Frames with Discretely Connected Precast Concrete Infill Panels

Snijder, H. H., Hofmeyer, H. & Hoenderkamp, J. C. D., 2011, IABSE-IASS 2011 London Symposium Report Compact Disc (CD-ROM). London: International Association for Bridge and Structural Engineering, p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Precast concrete
Steel
Analytical models
Stiffness
Concretes
2010
2 Citations (Scopus)
1 Downloads (Pure)

Design of a transparent column in glass and steel

Roebroek, F., Snijder, H. H., Herwijnen, van, F. & Huveners, E. M. P., 2010, Proceedings of Challenging Glass 2 - Conference on Architectural and Structural Applications of Glass. Bos, X., Louter, X. & Veer, X. (eds.). p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Glass
Steel
Experiments
1 Downloads (Pure)

Residual stress measurements in roller bent HE 100B sections

Spoorenberg, R. C., Snijder, H. H. & Hoenderkamp, J. C. D., 2010, SDSS' Rio 2010 Stability and Ductility of Steel Structures. de Batista, E. M., da Vellasco, P. C. G. & de Lima, L. R. O. (eds.). Rio de Janeiro: Federal University of Rio de Janeiro and State University of Rio de Janeiro, Vol. 2. p. 579-586

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Stress measurement
Residual stresses
Flanges
Steel
Arches
1 Downloads (Pure)

The Sustainable Highway for Environmentally Constrained Urbanized Areas

Vakar, L. I. & Snijder, H. H., 2010, 34th International Symposium on Bridge and Structural Engineering, Venice, September 2010. Zuerich: International Association for Bridge and Structural Engineering, p. 1-10 (IABSE reports; vol. 97).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Fossil fuels
Costs
Durability
Acoustic waves
Glass
2009
1 Downloads (Pure)

Lateral bracing force of IPE-240 beams at ultimate load

Snijder, H. H., Hoenderkamp, J. C. D., Bakker, M. C. M., Steenbergen, H. M. G. M. & Bruins, R. H. J., 2009, Proceedings of the 6th International Conference on Advances in Steel Structures, Hong Kong, 2009. Chan, SL. (ed.). Hong Kong, China, p. 205-212

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Buckling
Flanges
Stiffness
Defects

Parameter study on infilled steel frames with discretely connected precast concrete panels

Teeuwen, P. A., Kleinman, C. S., Snijder, H. H. & Hofmeyer, H., 2009, Proceedings of Sixth International Conference on Advances in Steel Structures 2009. Chan, S. L. (ed.). Hong Kong, China: The Hong Kong Institute of Steel Construction, Vol. 2. p. 826-833

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Precast concrete
Stiffness
Steel
Aspect ratio
Reinforcement
2 Downloads (Pure)

Residual stresses in cold bent HE 100A steel arches

Spoorenberg, R. C., Snijder, H. H., Hoenderkamp, J. C. D. & Bakker, M. C. M., 2009, Proceedings of the Nordic Steel Construction Conference. Uppsala: Swedish Institute of Steel Construction, p. 414-421

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Arches
Residual stresses
Steel
Flanges
Cooling
2008
195 Downloads (Pure)

Analysis of steel frames with precast concrete infill panels

Teeuwen, P. A., Kleinman, C. S., Snijder, H. H. & Hofmeyer, H., 2008, 17th Congress of IABSE, Creating and Renewing Urban Structures- Tall Buildings, Bridges and Infrastructure, Chicago 2008. IABSE-AIPPC-IVBH, X. (ed.). Zurich, Switzerland: International Association for Bridge and Structural Engineering, p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Precast concrete
Steel
Bolts
Experiments
Plastics

Cold forming hot-rolled wide flange beams into arches : Preliminary finite element simulations

Spoorenberg, R. C., Snijder, H. H., Hoenderkamp, J. C. D. & Bakker, M. C. M., 2008, 5th European Conference on Steel and Composite Structures. Ofner, R., Beg, D., Fink, J., Greiner, R. & Unterweger, H. (eds.). Brussel: ECCS, Vol. B. p. 1837-1842

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

Arches
Flanges

Cross-sectional instabilities of aluminium structural elements

Kutanova, N., Soetens, F. & Snijder, H. H., 2008, 5th Conference on Coupled Instabilities in Metal Structures (CIMS2008). Sydney: University of Sydney, p. 491-498

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Aluminum
1 Downloads (Pure)

Effective width approach for local buckling of aluminium sections exposed to fire

Maljaars, J., Soetens, F., Snijder, H. H. & Fellinger, J. H. H., 2008, Fifth International Conference on Thin-Walled Structures 2008. Mahendran, M. (ed.). Brisbane: Queensland University, p. 705-712

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Buckling
Fires
Aluminum
Aluminum alloys
Stiffness
3313 Downloads (Pure)

Effect of a tuned mass damper in footbrigd design

Breman, C., Stuit, H. G., Snijder, H. H. & Bakker, M. C. M., 2008, Proceedings of the third international conference on Footbridge 2008 - Footbridges for urban renewal. Caetano, E. & Cunha, A. (eds.). Porto, Portugal: Faculdade de Engenharia da Universidade do Porto (FEUP), p. 309-310

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File

High-Rise Trussed Frames with Perimeter Belt Bracing, Preliminary design for lateral load

Hoenderkamp, J. C. D., Snijder, H. H. & Hofmeyer, H., 2008, Eurosteel 2008, 5th European Conference on Steel and Composite Structures, research-practice-new materials. Ofner, R/Beg, D., Greiner, R., F. J. (ed.). p. 1737-1742

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

1 Downloads (Pure)

In-plane plastic limit load of steel circular arches : a lower bound limit analysis approach

Bakker, M. C. M., Spoorenberg, R. C., Snijder, H. H. & Hoenderkamp, J. C. D., 2008, 5th European Conference on Steel and Composite Structures. Ofner, R., Beg, D., Fink, J., Greiner, R. & Unterweger, H. (eds.). Brussels: ECCS European Convention for Constructional Steelwork, Vol. B. p. 1831-1836

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Load bearing capacity of spliced columns with single row bolted butt-plates

Snijder, H. H. & Hoenderkamp, J. C. D., 2008, Connections in Steel Structures VI, Proceedings of the Sixth International Workshop. Bjorhovde, R., Bijlaard, F. S. K. & Geschwindner, L. F. (eds.). Chicago, USA: American Institute of Steel Construction, p. 421-430

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review