Frank L.M. Delbressine

dr.ir.

  • 905 Citations
1987 …2019
If you made any changes in Pure these will be visible here soon.

Research Output 1987 2019

1987
28 Downloads (Pure)

Verslag van een reis naar de Verenigde Staten : juli 1987

Delbressine, F. L. M., 1987, Eindhoven: Technische Universiteit Eindhoven. 21 p. (TH Eindhoven. Afd. Werktuigbouwkunde, Vakgroep Produktietechnologie : WPB; vol. WPA0474)

Research output: Book/ReportReportPopular

Open Access
File
1989
247 Downloads (Pure)

On the integration of design and manufacturing

Delbressine, F. L. M., 1989, Eindhoven: Technische Universiteit Eindhoven. 93 p.

Research output: ThesisPhd Thesis 1 (Research TU/e / Graduation TU/e)

Open Access
File
1990
9 Citations (Scopus)
113 Downloads (Pure)

Integrating design and manufacturing

Delbressine, F. L. M. & van der Wolf, A. C. H., 1990, In : CIRP Annals. 39, 1, p. 149-152

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
1991
6 Citations (Scopus)
60 Downloads (Pure)

Discrete part design by taking manufacturing restrictions into account

Delbressine, F. L. M., Hijink, J. A. W. & van der Wolf, A. C. H., 1991, In : CIRP Annals. 40, 1, p. 171-174

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
1993
26 Downloads (Pure)

Knowledge-based design is duur maar de moeite waard

Delbressine, F. L. M. & Groot, de, R., 1993, In : Mechanische Technologie. 3, mei, p. 32-36 5 p.

Research output: Contribution to journalArticleProfessional

Open Access
File
25 Citations (Scopus)
82 Downloads (Pure)

On the automatic generation of set-ups given a feature-based design representation

Delbressine, F. L. M., de Groot, R. & van der Wolf, A. C. H., 1993, In : CIRP Annals : Manufacturing Technology. 42, 1, p. 527-530 4 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Process planning
Machine tools
Machining
1994

De integratie van ontwerpen en fabriceren

de Vries, W. A. H. & Delbressine, F. L. M., 1994, In : MB Produktietechniek. 60, 5, p. 154-159 6 p.

Research output: Contribution to journalArticleProfessional

1996
7 Citations (Scopus)
99 Downloads (Pure)

A relation-based product model suited for integrating design and manufacturing

Net, van der, A. J., de Vries, W. A. H., Delbressine, F. L. M. & van der Wolf, A. C. H., 1996, In : CIRP Annals : Manufacturing Technology. 45, 1, p. 161-164

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Machining centers
Coordinate measuring machines
Numerical analysis
1997

A Generic model for the predicition of thermomechanical errors of multi-axis machines

Schellekens, P. H. J., Delbressine, F. L. M. & Brouns, D., 1997, Proceedings Workshop on Traceability of Coordinate machines.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

1998

Accuracy analysis of multi-axis machines using a double ball bar

Florussen, G. H. J., Delbressine, F. L. M. & Schellekens, P. H. J., 1998.

Research output: Contribution to conferencePaperAcademic

1999

Traceability of CMM measurements

Dorp, van, B. W. J. J. A., Delbressine, F. L. M., Haitjema, H. & Schellekens, P. H. J., 1999, Proceedings of the 14th annual meeting of the American Society of Precision Engineering : October 31 - November 5, 1999, Monterey, California. Raleigh: American Society of Precision Engineering (ASPE), p. 329-331

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2000

Error component determination of multi-axis machines from 3D length measurements

Florussen, G. H. J., Delbressine, F. L. M. & Schellekens, P. H. J., 2000, Advanced mathematical and computational tools in metrology IV : [revised contributions at the 4th workshop on advanced mathematical and computational tools in metrology held in Oxford, UK, April 1999]. Ciarlini, P. (ed.). p. 88-97

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2001
64 Citations (Scopus)

Assessing geometrical errors of multi-axis machines by three-dimensional length measurements

Florussen, G. H. J., Delbressine, F. L. M., Molengraft, van de, M. J. G. & Schellekens, P. H. J., 2001, In : Measurement: Journal of the International Measurement Confederation. 30, 4, p. 241-255

Research output: Contribution to journalArticleAcademicpeer-review

positioning
Laser interferometry
Error compensation
laser interferometry
computer programs

Calculation of measurement uncertainty for multi-dimensional machines

Dorp, van, B. W. J. J. A., Delbressine, F. L. M., Haitjema, H. & Schellekens, P. H. J., 2001, Advanced mathematical and computational tools in metrology V : [revised contributions at the 5th workshop, Caparica, Portugal, May 2000]. Ciarlini, P., Cox, M. G., Pavese, F. & Richter, D. (eds.). Singapore: World Scientific, p. 344-351 (Series on Advances in Mathematics for Applied Sciences; vol. 57).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Quality control of machine tools by length measurement

Florussen, G. H. J., Delbressine, F. L. M. & Schellekens, P. H. J., 2001, Proceedings CIRP 34th international seminar on manufacturing systems : technology and challenges for the 21st century ; 16-18 May, 2001, Athens, Greece. Chryssolouris, G. (ed.). Athens: s.n., p. 142-149

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Quality control of machine tools by length measurements

Florussen, G. H. J., Delbressine, F. L. M. & Schellekens, P. H. J., 2001, the 34th CIRP international seminar on manufacturing systems. Greece, Athens, p. 142-149

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

23 Citations (Scopus)
4 Downloads (Pure)

Virtual CMM using Monte Carlo methods based on frequency content of the error signal

Dorp, van, B. W. J. J. A., Haitjema, H., Delbressine, F. L. M., Bergmans, R. & Schellekens, P. H. J., 2001, Recent developments in traceable dimensional measurements, 20-21 June 2001, Munich, Germany. Decker, J. E. & Brown, N. (eds.). Bellingham, Washington: SPIE, p. 158-167 (Proceedings of SPIE; vol. 4401).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

error signals
Monte Carlo method
planetary waves
metrology
autocorrelation
2002
558 Downloads (Pure)

EUSPEN : proceedings of the 3rd international conference, May 26-30, 2002, Eindhoven, The Netherlands

Delbressine, F. L. M. (ed.), Schellekens, P. H. J. (ed.), Homburg, F. G. A. (ed.) & Haitjema, H. (ed.), 2002, Eindhoven: Technische Universiteit Eindhoven.

Research output: Book/ReportBook editingAcademic

Open Access
File
2003
8 Citations (Scopus)
2 Downloads (Pure)

Assessing thermally induced errors of machine tools by 3D length measurements

Florussen, G. H. J., Delbressine, F. L. M. & Schellekens, P. H. J., 2003, In : CIRP Annals : Manufacturing Technology. 52, 1, p. 333-336

Research output: Contribution to journalArticleAcademicpeer-review

Machine tools
Hot Temperature
54 Downloads (Pure)

Precision cutting of glassy polymers: influence of aging on the cutting process

Gubbels, G. P. H., Delbressine, F. L. M., Govaert, L. E. & Schellekens, P. H. J., 2003, Proc. 4th International Symposium on Investigation of Non-Linear Dynamic Effects in Production Systems. Germany, Chemnitz, p. 1-2

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Polystyrenes
Aging of materials
Polymers
Surface properties
Brittleness
2004

Assessing thermally induced errors of machine tools using a telescopic double ball bar

Delbressine, F. L. M., Florussen, G. H. J., Schijvenaars, L. A. & Schellekens, P. H. J., 2004, Proceedings of the 4th EUSPEN international conference : May 31 - June 2, 2004, Glasgow, UK. Chetwynd, D. (ed.). p. 366-367

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Machine tools
Error compensation
Temperature
Hot Temperature
15 Citations (Scopus)
1 Downloads (Pure)

Diamond tool wear when cutting amorphous polymers

Gubbels, G. P. H., van der Beek, G. J. F. T., Hoep, A. L., Delbressine, F. L. M. & Halewijn, van, H., 2004, In : CIRP Annals : Manufacturing Technology. 53, 1, p. 447-450

Research output: Contribution to journalArticleAcademicpeer-review

Diamonds
Wear of materials
Polymers
Electric tools
Crystalline materials
1 Downloads (Pure)

Electrostatic tool wear in diamond turning of amorphous polymers

Gubbels, G. P. H., van der Beek, G. J. F. T., Delbressine, F. L. M. & Schellekens, P. H. J., 2004, Proceedings of the 4th EUSPEN international conference : May 31 - June 2, 2004, Glasgow, UK. Chetwynd, D. (ed.). p. 97-98

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Electrostatics
Diamonds
Wear of materials
Polymers
Lenses
15 Citations (Scopus)
1 Downloads (Pure)

High-accuracy CMM metrology for micro systems

Bos, E. J. C., Delbressine, F. L. M. & Haitjema, H., 2004, 8th International Symposium on measurement and quality control in production, october 12th - 15th, 2004, Erlangen, Germany. S.l.: VDI/VDE-Gesellschaft, 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2 Citations (Scopus)

Precision cutting of glassy polymers: influence of aging on the cutting process

Gubbels, G. P. H., Delbressine, F. L. M., Govaert, L. E. & Schellekens, P. H., 2004, Optical fabrication, testing, and metrology : 30 September - 3 October 2003, St. Etienne, France. Geyl, R. (ed.). Bellingham: SPIE, p. 111-121 (Proceedings of SPIE; vol. 5252).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Polystyrenes
Aging of materials
Polymers
Surface properties
Mechanics
2005

3D Tactile Sensor for Nanometrology

Bos, E. J. C., Delbressine, F. L. M. & Dietzel, A. H., 2005, MNE 2005. Austria, Vienna, p. September 19-22, 200

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2006
31 Citations (Scopus)
1 Downloads (Pure)

Modelling thermomechanical behaviour of multi-axis machine tools

Delbressine, F. L. M., Florussen, G. H. J., Schijvenaars, L. A. & Schellekens, P. H. J., 2006, In : Precision Engineering. 30, 1, p. 47-53

Research output: Contribution to journalArticleAcademicpeer-review

Machine tools
Error compensation
Temperature
Hot Temperature
2007
19 Citations (Scopus)
2 Downloads (Pure)

Compensation of the anisotropic behavior of single crystalline silicon in a 3D tactile sensor

Bos, E. J. C., Heldens, R. W. P., Delbressine, F. L. M., Schellekens, P. H. J. & Dietzel, A. H., 2007, In : Sensors and Actuators, A: Physical. 134, 2, p. 374-381

Research output: Contribution to journalArticleAcademicpeer-review

Silicon
Suspensions
Stiffness
Crystalline materials
stiffness

Vehicle seat design : state of the art and recent development

Tan, C. F., Delbressine, F. L. M. & Rauterberg, G. W. M., 2007, Proceedings of the World Engineering Congress 2007 (WEC 2007) 5-9 August 2007, Penang, Malaysia. Mokhtar, A. S., Abdullah, E. J. & Adam, N. M. (eds.). Federation of Engineering Institutions of Islamic Countries, p. 51-61

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Seats
Truck drivers
Tractors (truck)
Trucks
Railroad cars
2008
15 Citations (Scopus)
3 Downloads (Pure)

A lightweight suction gripper for micro assembly

Bos, E. J. C., Bullema, J. E., Delbressine, F. L. M., Schellekens, P. H. J. & Dietzel, A. H., 2008, In : Precision Engineering. 32, 2, p. 100-105

Research output: Contribution to journalArticleAcademicpeer-review

Grippers
Needles
Macros
Hysteresis
Friction
599 Citations (Scopus)
1 Downloads (Pure)

Geometric error measurement and compensation of machines : an update

Schwenke, H., Knapp, W., Haitjema, H., Weckenmann, A., Schmitt, R. & Delbressine, F. L. M., 2008, In : CIRP Annals : Manufacturing Technology. 57, 2, p. 660-675

Research output: Contribution to journalArticleAcademicpeer-review

Measurement errors
Error compensation
Machine tools
Coordinate measuring machines
Machining

Objectifying discomfort seat measurement for next generation truck driver's seat

Tan, C. F., Chen, W., Delbressine, F. L. M. & Rauterberg, G. W. M., 2008, Congress proceedings / FISITA World Automotive Congress : 14 - 19 September 2008, Munich, Germany. Wiesbaden: Springer

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Truck drivers
Seats
Trucks
Intelligent systems
1 Downloads (Pure)

Subjective and objective measurements for comfortable truck driver's seat

Tan, C. F., Delbressine, F. L. M., Chen, W. & Rauterberg, G. W. M., 2008, Proceedings of 9th international symposium on advanced vehicle control (AVEC 2008). Tokyo: Inter Group Corporation, p. 851-856

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Truck drivers
Seats
Trucks
Sales
Personnel
11 Citations (Scopus)
3 Downloads (Pure)

Teaching machine learning to design students

Vlist, van der, B. J. J., van de Westelaken, H. F. M., Bartneck, C., Hu, J., Ahn, R. M. C., Barakova, E. I., Delbressine, F. L. M. & Feijs, L. M. G., 2008, Technologies for E-learning and digital entertainment : third international conference, Edutainment 2008, Nanjing, China, June 25-27, 2008 : proceedings. Pan, Z., Zhang, X. & El Rhalibi, A. (eds.). Berlin: Springer, p. 206-217 12 p. (Lecture notes in computer science; vol. 5093).

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

Computer aided instruction
Learning systems
Students
Intelligent systems
Computer science
2009
2 Citations (Scopus)

Developing novel extensions to support prototyping for interactive social robots

Bhömer, ten, M., Bartneck, C., Hu, J., Ahn, R. M. C., Tuyls, K. P., Delbressine, F. L. M. & Feijs, L. M. G., 2009, Proceedings of 21st Benelux Conference on Artificial Intelligence (BNAIC 2009). Eindhoven: Eindhoven University of Technology, p. 11-17

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Robots
Sensors
Robotics
Product design
Global positioning system
2010
1 Citation (Scopus)
1 Downloads (Pure)

Design of a Medical Simulator Hard- and Software Architecture

Peters, P. J. F., Delbressine, F. L. M. & Feijs, L. M. G., 2010, Proceedings of Edutainment 2010. Zhang, X. & et al., X. (eds.). Berlin Heidelberg: Springer, p. 235-246 (Lecture Notes in Computer Science; vol. 6249).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Software architecture
Computer hardware
Simulators
Medical education
Hardware
21 Downloads (Pure)

Patient simulator

Feijs, L. M. G., Peters, P. J. F., Delbressine, F. L. M. & Hu, J., 15 Apr 2010, IPC No. WO, Patent No. WO2010041931 (A1) , Priority date 8 Nov 2010, Priority No. NL20081036036 20081008

Research output: PatentPatent publication

Open Access
File
Constriction
2011
31 Downloads (Pure)

Artificial skin and patient simulator comprising the artificial skin

Delbressine, F. L. M., van den Boomen, G. J. A. & Feijs, L. M. G., 4 May 2011, IPC No. EP, Patent No. EP 2317489 A1, Priority date 2 Nov 2009, Priority No. 09174760.0

Research output: PatentPatent publication

Open Access
File
skin (animal)
artificial colors
topography
animals
color
4 Citations (Scopus)

Distributed architecture for delivery simulators

Hu, J., Peters, P. J. F., Delbressine, F. L. M. & Feijs, L. M. G., 2011, Proceedings of the International Conference on e-Health Networking, Digital Ecosystems and Technologies (EDT 2010), 17-18 April 2010, Shenzhen, China. Piscataway: Institute of Electrical and Electronics Engineers, p. 109-112

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Simulators
Software architecture
Computer hardware
Communication
2 Downloads (Pure)

Het ontwerpen van een baby simulator

Peters, P. J. F., Feijs, L. M. G. & Delbressine, F. L. M., 2011, p. 69-71.

Research output: Contribution to conferencePosterAcademic

26 Downloads (Pure)

Medical simulator with injection device

Offermans, S. A. M., Deckers, E. J. L., Feijs, L. M. G., Delbressine, F. L. M. & Oei, S. G., 5 May 2011, IPC No. WO, Patent No. WO2010EP65937 20101022, Priority No. EP20090174132 20091027

Research output: PatentPatent publication

Open Access
File
Needles
Simulators
Networks (circuits)
Electric potential
Plant shutdowns

Overactuation: A solution for the accuracy–throughput speed contradiction in parallel axis positioning systems

van der Wielen, A. M., Delbressine, F. L. M. & Schellekens, P. H. J. P., 2011, In : Mechanism & Machine Theory. 46, p. 1732-1743

Research output: Contribution to journalArticleAcademicpeer-review

Actuators
Stiffness
Numerical models
Kinematics
Throughput
1 Downloads (Pure)

Quality and rules for mechanical aspects of tangible interaction design

Broekhuijsen, M. J., Delbressine, F. L. M. & Feijs, L. M. G., 2011, Proceedings of the Second Conference on Creativity and Innovation in Design (DESIRE '11), October 19-21 2011, Eindhoven, The Netherlands. New York: Association for Computing Machinery, Inc, p. 351-354

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Kinematics
2012
19 Citations (Scopus)
5 Downloads (Pure)

Motivating arm-hand use for stroke patients by serious games

Delbressine, F., Timmermans, A., Beursgens, L., de Jong, M., van Dam, A. N. C., Verweij, D., Janssen, M. & Markopoulos, P., 2012, Proceedings of the 34th Annual International Conference of the IEEE EMBS, 28 August - 1 sepetember 2012, . Vol. 2012. p. 3564-3567 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Arm
Hand
Stroke
Technology
Survivors
2013
47 Downloads (Pure)

Designing preterm muscle tone and arm movement simulation

Peters, P. J. F., Delbressine, F. L. M. & Feijs, L. M. G., 2013, Proceedings of 2013 International Conference on Biological, Medical and Chemical Engineering, December 1-2, 2013, Hong Kong. Purshotaman, E. (ed.). Lancaster: DEStech publications, p. 147-150

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Health risks
Risk assessment
Muscle
Simulators
2014
4 Downloads (Pure)

Designing preterm neonatal cyanosis simulation

Peters, P. J. F., Delbressine, F. L. M. & Feijs, L. M. G., 7 Apr 2014, Proceedings IWBBIO 2014, 7-9 April 2014, Granada. s.l.: s.n., p. 1325-1337 13 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Health risks
Risk assessment
Skin
Simulators
2016
267 Downloads (Pure)

Cliff : the automatized zipper

Baharom, M. Z., Toeters, M. J., Delbressine, F. L. M., Bangaru, C. & Feijs, L. M. G., 20 Oct 2016, GFC - Global Fashion Conference 2016, 20-21 October 2016, Stockholm, Sweden.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Fasteners
Byproducts
Innovation
Feedback
Industry
5 Downloads (Pure)

Conceptual determination and assessment of cyanosis

Azmi, N. F. B., Delbressine, F. L. M. & Feijs, L. M. G., 10 Jul 2016, In : International Journal of Bioscience, Biochemistry and Bioinformatics. 6, 3, p. 75-83 9 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
5 Citations (Scopus)
15 Downloads (Pure)

Kinematics analysis of a robotic zipper prototype for miniaturisation

Baharom, M. Z., Delbressine, F. L. M. & Feijs, L. M. G., 4 Oct 2016, In : International Journal of Mechanical Engineering and Robotics Research. 5, 4, p. 305-310 6 p., 14.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Fasteners
Kinematics
Robotics
DC motors
Torque
2 Citations (Scopus)
2 Downloads (Pure)

Numerical analysis of spring stiffness in vehicle design development stage

Hassan, M. Z., Abdul Aziz, M. K. H., Delbressine, F. & Rauterberg, G. W. M., 1 May 2016, In : International Journal of Applied Engineering Research. 11, 7, p. 5163-5168 6 p.

Research output: Contribution to journalArticleAcademicpeer-review

Numerical analysis
Stiffness
Mathematical models
Computer simulation