• 151 Citations
20082020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Conference contribution
2020

Design of a High-Frequency Wireless Power Transfer System for a Rotating Application

Bastiaens, K., Krop, D. C. J., Curti, M., Jumayev, S. & Lomonova, E. A., 20 May 2020, 2019 19th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering (ISEF). Institute of Electrical and Electronics Engineers, 2 p. 9097012

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2019

Design of a permanent magnet-biased reluctance valve actuator with integrated eddy current damping

van Dam, J., Krop, D., Gysen, B. & Lomonova, E., 25 Jul 2019, 2019 12th International Symposium on Linear Drives for Industry Applications, LDIA 2019. Piscataway: Institute of Electrical and Electronics Engineers, 6 p. 8770980

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

4 Downloads (Pure)

Trends in superconducting linear electric machines

Bianchetti, M., de Bruyn, B. J. H., Krop, D. C. J. & Lomonova, E. A., 1 Jul 2019, 2019 12th International Symposium on Linear Drives for Industry Applications, LDIA 2019. Piscataway: Institute of Electrical and Electronics Engineers, 6 p. 8771005

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

1 Downloads (Pure)
2018

Comparison of two analytical modelling techniques, applied to a linear permanent magnet synchronous motor

Aleksandrov, S., Krop, D. C. J., Overboom, T. T. & Lomonova, E. A., 2018, Proceedings of the IEEE Young Researchers Symposium in Electrical Power Engineering (YRS 2018), May 24-25 2018, Bruxelles, Belgium.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Design and comparison of high-frequency resonant and non-resonant rotating transformers

Bastiaens, K., Krop, D. C. J., Jumayev, S. & Lomonova, E. A., 27 Nov 2018, ICEMS 2018 - 2018 21st International Conference on Electrical Machines and Systems. Piscataway: Institute of Electrical and Electronics Engineers, p. 1703-1708 6 p. 8549075

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

1 Citation (Scopus)
5 Downloads (Pure)

Design of an axial-flux permanent magnet machine for a solar-powered electric vehicle

Friedrich, L. A. J., Bastiaens, K., Gysen, B. L. J., Krop, D. C. J. & Lomonova, E., 21 May 2018, 2018 Thirteenth International Conference on Ecological Vehicles and Renewable Energies (EVER). Piscataway: Institute of Electrical and Electronics Engineers, 5 p. 8362374

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

3 Citations (Scopus)
2 Downloads (Pure)

Improved preisach model for modelling magnetic hysteresis effect in non-oriented steels

Zeinali, R., Krop, D. C. J., Lomonova, E. & Ertan, H. B., 24 Oct 2018, Proceedings - 2018 23rd International Conference on Electrical Machines, ICEM 2018. Piscataway: Institute of Electrical and Electronics Engineers, p. 1031-1036 6 p. 8506975

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

1 Citation (Scopus)
2 Downloads (Pure)
2017

Analytical modelling techniques for thrust force calculation of a permanent magnet linear motor

Aleksandrov, S., Krop, D. C. J., van Casteren, D. T. E. H., Overboom, T. T. & Lomonova, E. A., 7 Nov 2017, 2017 11th International Symposium on Linear Drives for Industry Applications (LDIA). 11th ed. Osaka, Japan, Japan, p. 1-6 6 p. 8097230

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

4 Downloads (Pure)
2013

FEA of the cross-coupling effects of a tubular PM actuator with integrated contactless energy transfer

Krop, D. C. J., Jansen, J. W., Lomonova, E. & Kalai, A., 2013, Proceedings of the Ninth International Symposium on Linear Drives for Industry Applications (LDIA13), 7-10 July 2013, Hangzhou, China.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

1 Downloads (Pure)

Inema : ultra dynamic and high-accuracy 2-DoF actuator

Casteren, van, D. T. E. H. & Krop, D. C. J., 2013, Hannover Messe, 8-12 April 2013, Hannover, Germany.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

Tubular permanent magnet motor with Integrated Coaxial Transformer

Krop, D. C. J., Jansen, J. W. & Lomonova, E. A., 1 Jan 2013, Proceedings of the 13th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN . Leach, R. & Shore, P. (eds.). European Society for Precision Engineering and Nanotechnology, Vol. 2. p. 360-363 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2011

Analysis and design of a tubular linear PM motor with integrated contactless energy transfer

Krop, D. C. J., Jansen, J. W. & Lomonova, E., 2011, Proceedings of the 37th IEEE Industrial Electronics Society Conference (IECON 2011), 7-10 November 2011, Melbourne, Australia. Piscataway: Institute of Electrical and Electronics Engineers, p. 1752-1757

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

5 Downloads (Pure)

Development of a linear position independent inductive energy transfer system

Gerrits, T., Krop, D. C. J., Encica, L. & Lomonova, E., 2011, Proceedings of the IEEE International Conference on Electric Machines and Drives (IEMDC), 15-18 May 2011, Niagara Falls, Ontario, Canada. IEMDC, p. 1467-1471

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

3 Citations (Scopus)
7 Downloads (Pure)
2010

Analysis of a novel double sided flux switching linear motor topology

Krop, D. C. J., Encica, L. & Lomonova, E., 2010, ICEM 2010 , Proceedings XIX International Conference on Electrical Machines, Rome - ITALY, September 6-8, 2010. ICEM, p. 1-5

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

30 Citations (Scopus)
3 Downloads (Pure)

Contactless power transfer to a rotating disk

Smeets, J. P. C., Krop, D. C. J., Jansen, J. W. & Lomonova, E., 2010, Proceedings of the 2010 IEEE International Symposium on Industrial Electronics (ISIE), 3-7July 2010, Bari. Piscataway: Institute of Electrical and Electronics Engineers, p. 748-753

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
20 Citations (Scopus)
762 Downloads (Pure)

Contactless power transfer to a rotating load

Smeets, J. P. C., Krop, D. C. J. & Lomonova, E., 2010, 5th IEEE Young Researchers Symposium, YRS2010 Leuven. Piscataway: Institute of Electrical and Electronics Engineers

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Hybrid modeling method fora the analysis of a linear flux switching machine

Krop, D. C. J., Encica, L. & Lomonova, E., 2010, Proc. CEFC Digest CD, 2010 14th Biennial IEEE Conference on Electromagnetic Field Computation. Institute of Electrical and Electronics Engineers

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
3 Citations (Scopus)
38 Downloads (Pure)

Optimal design of a pot core rotating transformer

Smeets, J. P. C., Krop, D. C. J., Jansen, J. W., Hendrix, M. A. M. & Lomonova, E., 2010, Proceedings of the 2010 IEEE Energy Conversion Congress and Exposition (ECCE), 12-16 September 2010, Atlanta, Georgia. Piscataway: Institute of Electrical and Electronics Engineers, p. 4390-4397

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
29 Citations (Scopus)
231 Downloads (Pure)

Reluctance network model for the in-wheel motor of a series-hybrid truck using Tooth Contour Method

Kremers, M. F. J., Ilhan, E., Krop, D. C. J., Paulides, J. J. H. & Lomonova, E., 2010, Proc.14th Biennial IEEE Conference on Electromagnetic Field Computation (CEFC), 2010,Chicago, IL, 9-12 May 2010. Piscataway: Institute of Electrical and Electronics Engineers, p. 1-1

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
4 Citations (Scopus)
67 Downloads (Pure)
2009

Improvement of the magnetizing inductance of a moving transformer integrated in the end teeth of a linear synchronous motor

Krop, D. C. J., Jansen, J. W., Paulides, J. J. H. & Lomonova, E., 2009, Proceedings of the 7th international Symposium on LDIA: Linear Drives for industry Applications, 07-09-2009, Seoul. Seoul: LDIA, p. 192-195

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
35 Downloads (Pure)
2008

A study on the integration of contactless energy transfer in the end tooth of a PM synchronous linear motor

Krop, D. C. J. & Lomonova, E. A., 2008, Abstracts of 53nd Magnetism and Magnetic Materials Conference. Austin, Texas: MMM, p. 524-524

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Design and synthesis of a permanent magnet linear synchronous motor by means of the Schwarz-Christoffel mapping

Krop, D. C. J. & Lomonova, E. A., 2008, Proc. 13th Biennial IEEE Conference on Electromagnetic Field Computation. Piscataway: Institute of Electrical and Electronics Engineers, p. 561-561

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Modeling of a permanent magnet linear synchronous motor by means of the Schwarz-Christoffel mapping

Krop, D. C. J. & Lomonova, E. A., 2008, 4th IEEE Benelux Young Researchers Symposium in Electrical Power Engineering, Eindhoven, The Netherlands, 7-8 February, 2008. Encica, L., Gysen, B. L. J., Jansen, J. W. & Krop, D. C. J. (eds.). Eindhoven: Technische Universiteit Eindhoven, p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review