C.F.J. (Jaap) den Doelder

2025

Impact of molecular architecture and draw ratio on enhancement of targeted mechanical properties of machine direction oriented polyethylene films produced after blown film extrusion

Guleria, D., Edeleva, M., Vervoort, S., Ge, S., den Doelder, C. F. J. (Corresponding author) & Cardon, L., Jan 2025, In: Journal of Plastic Film & Sheeting. 41, 1, p. 35-67 33 p.

Research output: Contribution to journal › Article › Academic › peer-review

Open Access

File

9 Downloads (Pure)

2024

Impact of resin density and short-chain branching distribution on structural evolution and enhancement of tensile modulus of MDO-PE films

Guleria, D., Ge, S., Cardon, L., Vervoort, S. & den Doelder, C. F. J. (Corresponding author), Oct 2024, In: Polymer Testing. 139, 15 p., 108560.

Research output: Contribution to journal › Article › Academic › peer-review

Open Access

File

1 Citation (Scopus)

13 Downloads (Pure)

Reprocessing polyurethane foam using dynamic covalent chemistry in extrusion

van Aart, J., den Doelder, J. & Heuts, J. P. A. (Corresponding author), 15 Feb 2024, In: Journal of Applied Polymer Science. 141, 7, 11 p., e54941.

Research output: Contribution to journal › Article › Academic › peer-review

Open Access

File

1 Citation (Scopus)

106 Downloads (Pure)

2023

Impact of Orientation Temperature and Resin Density in structural evolution and morphology of MDO-PE films

Guleria, D., den Doelder, C. F. J., Vervoort, S., Ragaert, K. & Ge, S., May 2023, Book of Abstracts, 38th International Conference of the Polymer Processing Society. p. 200 1 p. S07-216

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic

Open Access

Investigating the impact of resin molar mass and process draw ratio on enhancement of desired mechanical properties in MDO (machine direction oriented) PE films.

Guleria, D., den Doelder, C. F. J., Cardon, L. & Edeleva, M., Sept 2023, (Accepted/In press) Book of Abstracts, International Conference on Polymer Process Innovation | PPI 2023. 1 p. 149

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

Simulations mapping the influence of oxygen, extruder residence time, and mechanical shear on low-density polyethylene structure during recycling

Yaghini, N. (Corresponding author) & den Doelder, J., 16 Jan 2023, In: Polymer. 265, 10 p., 125596.

Research output: Contribution to journal › Article › Academic › peer-review

Open Access

File

2 Citations (Scopus)

82 Downloads (Pure)

X-Ray analysis of structural evolutions in MDO-PE films

Guleria, D., den Doelder, C. F. J., Vervoort, S. & Ge, S., 11 Aug 2023, Book of Abstracts, IUPAC Chains 2023 ( Connecting chemical worlds ). The Hague,The Netherlands., p. 622 1 p. P1-B0281

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic

Open Access

2022

Computational study of the structural properties of recycled low-density polyethylene

Yaghini, N. (Corresponding author), Tuinier, R. & den Doelder, J. (Corresponding author), 15 Feb 2022, In: Polymer. 241, 11 p., 124525.

Research output: Contribution to journal › Article › Academic › peer-review

Open Access

File

3 Citations (Scopus)

66 Downloads (Pure)

Experiments and Modeling of Flow-Enhanced Nucleation in LLDPE

Nicholson, D. A., Andreev, M., Kearns, K. L., Chyasnavichyus, M., Monaenkova, D., Moore, J., den Doelder, J. & Rutledge, G. C. (Corresponding author), 1 Sept 2022, In: Journal of Physical Chemistry B. 126, 34, p. 6529-6535 7 p.

Research output: Contribution to journal › Article › Academic › peer-review

Open Access

File

2 Citations (Scopus)

107 Downloads (Pure)

2021

Strategy for reducing molecular ensemble size for efficient rheological modeling of commercial polymers

Gong, Y., Ginzburg, V., Vervoort, S., Den Doelder, J. & Larson, R. G. (Corresponding author), 1 Jan 2021, In: Journal of Rheology. 65, 1, p. 43-57 15 p.

Research output: Contribution to journal › Article › Academic › peer-review

2 Citations (Scopus)

2020

Design of Nonideal Eutectic Mixtures Based on Correlations with Molecular Properties

Kollau, L. J. B. M., Tuinier, R. (Corresponding author), Verhaak, J., Den Doelder, J., Filot, I. A. W. & Vis, M., 25 Jun 2020, In: Journal of Physical Chemistry B. 124, 25, p. 5209-5219 11 p.

Research output: Contribution to journal › Article › Academic › peer-review

Open Access

19 Citations (Scopus)

Processability predictions for mechanically recycled blends of linear polymers

van Gisbergen, J. & den Doelder, J. (Corresponding author), 1 Oct 2020, In: Journal of Polymer Engineering. 40, 9, p. 771-781 11 p.

Research output: Contribution to journal › Article › Academic › peer-review

5 Citations (Scopus)

Rheology of crystallizing LLDPE

Andreev, M., Nicholson, D. A., Kotula, A., Moore, J. D., den Doelder, J. & Rutledge, G. C. (Corresponding author), 1 Nov 2020, In: Journal of Rheology. 64, 6, p. 1379-1389 11 p.

Research output: Contribution to journal › Article › Academic › peer-review

10 Citations (Scopus)

2019

Integrated kinetic Monte Carlo-structure-rheology model for solution copolymerization of ethylene and α-olefins

Agarwal, U. (Corresponding author) & den Doelder, J., 8 Jan 2019, In: Macromolecules. 52, 1, p. 293-310 19 p.

Research output: Contribution to journal › Article › Academic › peer-review

Open Access

File

7 Citations (Scopus)

64 Downloads (Pure)

2018

Compatibilization of polypropylene–polyethylene blends

Vervoort, S., den Doelder, J., Tocha, E., Genoyer, J., Walton, K. L., Hu, Y., Munro, J. & Jeltsch, K., 11 Apr 2018, In: Polymer Engineering & Science. 58, 4, p. 460-465 6 p.

Research output: Contribution to journal › Article › Academic › peer-review

33 Citations (Scopus)

2017

Her.bin.ding

den Doelder, C. F. J., 12 May 2017, Eindhoven: Technische Universiteit Eindhoven. 24 p.

Research output: Book/Report › Inaugural/farewell speech › Academic

Open Access

File

294 Downloads (Pure)

2016

Compatibilization of polypropylene – polyethylene blends

Vervoort, S., den Doelder, C. F. J., Tocha, E., Genoyer, J., Walton, K. L., Hu, Y., Munro, J. & Jeltsch, K., 22 Sept 2016, Proceedings of PMI 2016 – 7th bi-annual International Conference on Polymers and Moulds Innovations: 22-23 September 2016, Ghent (Belgium). p. 301-306 7 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

5 Downloads (Pure)

2014

Development of high Mooney viscosity, homogeneous long-chain branched EPDM

Li Pi Shan, C., Clayfield, T. & Den Doelder, C. F. J., 2014, In: Rubber World. 250, 2, p. 34-40 7 p.

Research output: Contribution to journal › Article › Academic › peer-review

1 Citation (Scopus)

Numerical prediction of nonlinear rheology of branched polymer melts

Das, C., Read, D. J., Auhl, D., Kapnistos, M., Den Doelder, C. F. J., Vittorias, I. & McLeish, T. C. B., 2014, In: Journal of Rheology. 58, 3, p. 737-757 21 p.

Research output: Contribution to journal › Article › Academic › peer-review

31 Citations (Scopus)

Physics-based film blowing modeling to enhance empirical film property predictions from polymer and processing parameters

Leonova, T. I., Eijndhoven, van, S. J. L. & Doelder, den, C. F. J., 2014, ANTEC 2014 (Proceedings of the Technical Conference & Exhibition, Las Vegas, Nevada, USA, April 28-30, 2014). Society of Plastics Engineers, p. 950-954

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

7 Downloads (Pure)

2011

Exploration of branching topology effects on polymer melt rheology using hierarchical calculation schemes

den Doelder, C. F. J., Das, C. & Read, D. J., Jun 2011, In: Rheologica Acta. 50, 5-6, p. 469-484 16 p.

Research output: Contribution to journal › Article › Academic › peer-review

2 Citations (Scopus)

Linking models of polymerization and dynamics to predict branched polymer structure and flow

Read, D. J., Auhl, D., Das, C., Den Doelder, C. F. J., Kapnistos, M., Vittorias, I. & McLeish, T. C. B., 30 Sept 2011, In: Science. 333, 6051, p. 1871-1874 4 p.

Research output: Contribution to journal › Article › Academic › peer-review

144 Citations (Scopus)

2010

Polymer melt fracture

Koopmans, R. J., den Doelder, C. F. J. & Molenaar, J., 2010, Boca Raton: Taylor and Francis Ltd. 341 p.

Research output: Book/Report › Book › Academic

2009

A modeling approach to the effect of resin characteristics on parison formation in extrusion blow molding

Yousefi, A. M., Den Doelder, C. F. J., Rainville, M. A. & Koppi, K. A., Feb 2009, In: Polymer Engineering & Science. 49, 2, p. 251-263 13 p.

Research output: Contribution to journal › Article › Academic › peer-review

19 Citations (Scopus)

Quantum mechanical criteria for choosing appropriate voltage stabilization additives for polyethylene

Kisin, S., den Doelder, C. F. J., Eaton, R. F. & Caronia, P. J., Feb 2009, In: Polymer Degradation and Stability. 94, 2, p. 171-175 5 p.

Research output: Contribution to journal › Article › Academic › peer-review

26 Citations (Scopus)

The relationship between tubular low-density polyethylene (LDPE) blown-film optics and molecular structure

Den Doelder, C. F. J., Karjala, T. & Demirors, M., 2009, 67th Annual Technical Conference of the Society of Plastics Engineers 2009, ANTEC 2009. Vol. 5. p. 2806-2810 5 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

1 Citation (Scopus)

2008

Constitutive model parameters estimation from rheotens steady state and resonance characteristics

Zavinska, O., van Eijndhoven, S. J. L., Claracq, J. & den Doelder, C. F. J., Jul 2008, In: International Journal of Material Forming. 1, SUPPL. 1, p. 807-810 4 p.

Research output: Contribution to journal › Article › Academic › peer-review

5 Citations (Scopus)

Correlations between high-density polyethylene viscoelasticity and annular extrudate swell

Den Doelder, C. F. J., Mangnus, M. & Kapur, M. B., 2008, The XVth International Congress on Rheology - The Society of Rheology 80th Annual Meeting. p. 51-54 (AIP Conference Proceedings; vol. 1027).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

From reactor to rheology in LDPE modeling

Read, D. J., Das, C., Kapnistos, M., Auhl, D., Den Doelder, C. F. J., Vittorias, I. & McLeish, T. C. B., 2008, The XVth International Congress on Rheology - The Society of Rheology 80th Annual Meeting. p. 424-426 3 p. (AIP Conference Proceedings; vol. 1027).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

1 Downloads (Pure)

The effect of molar mass distribution on extrudate swell of linear polymers

den Doelder, C. F. J. & Koopmans, R. J., Jun 2008, In: Journal of Non-Newtonian Fluid Mechanics. 152, 1-3, p. 195-202 8 p.

Research output: Contribution to journal › Article › Academic › peer-review

12 Citations (Scopus)

2006

Novel approach to develop rheological structure-property relationships using genetic programming

Jordaan, E., Den Doelder, C. F. J. & Smits, G., 2006, Parallel Problem Solving from Nature, PPSN IX: 9th International Conference, Reykjavik, Iceland, September 9-13, 2006, Proceedings. Runarsson, T. P., Beyer, H.-G., Burke, E., Merelo-Guervós, J. J., Whitley, L. D. & Yao, X. (eds.). Dordrecht: Springer, p. 322-331 10 p. (Lecture Notes in Computer Science; vol. 4193).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

2 Citations (Scopus)

Viscosity and compliance from molar mass distributions using double reptation models

den Doelder, C. F. J., Dec 2006, In: Rheologica Acta. 46, 2, p. 195-210 16 p.

Research output: Contribution to journal › Article › Academic › peer-review

12 Citations (Scopus)

2005

Extrudate swell analysis and simulations for the IUPAC-LDPE melt using the K-BKZ model

Gaidai, O., Doelder, den, C. F. J., Vries, de, S. & Ven, van de, A. A. F., 2005, Eindhoven: Technische Universiteit Eindhoven. 16 p. (CASA-report; vol. 0509)

Research output: Book/Report › Report › Academic

Open Access

File

78 Downloads (Pure)

Pressure oscillations and periodic extrudate distortions of long-chain branched polyolefins

Den Doelder, C. F. J., Koopmans, R., Dees, M. & Mangnus, M., 2005, In: Journal of Rheology. 49, 1, p. 113-126 14 p.

Research output: Contribution to journal › Article › Academic › peer-review

19 Citations (Scopus)

2002

Expanding the industrial use of linear viscoelastic material functions

den Doelder, C. F. J., Anile, A. M., Capasso, V. & Greco, A., 2002, Progress in Industrial Mathematics at ECMI 2000. Dordrecht: Springer, p. 420-426

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

1 Downloads (Pure)

Modeling foam growth in semi-crystalline thermoplastics

Den Doelder, C. F. J., Sammler, R. L., Koopmans, R. J. & Paquet, A. N., 2002, In: Cellular Polymers. 21, 2, p. 99-116 18 p.

Research output: Contribution to journal › Article › Academic › peer-review

10 Citations (Scopus)

2000

Modeling foam growth in thermoplastics

Koopmans, R. J., Den Doelder, C. F. J. & Paquet, A. N., 1 Dec 2000, In: Advanced Materials. 12, 23, p. 1873-1880 8 p.

Research output: Contribution to journal › Article › Academic › peer-review

37 Citations (Scopus)

1999

Design and implementation of polymer melt fracture models

Doelder, den, C. F. J., 1999, Eindhoven: Technische Universiteit Eindhoven. 144 p.

Research output: Thesis › Phd Thesis 2 (Research NOT TU/e / Graduation TU/e)

Open Access

File

2403 Downloads (Pure)

1998

Comparing the wall-slip and the constitutive approach for modelling spurt instabilities in polymer melt flows

Doelder, den, C. F. J., Koopmans, R. J., Molenaar, J. & Ven, van de, A. A. F., 1998, In: Journal of Non-Newtonian Fluid Mechanics. 75, 1, p. 25-41 17 p.

Research output: Contribution to journal › Article › Academic › peer-review

25 Citations (Scopus)

1 Downloads (Pure)

Onset of the sharkskin phenomenon in polymer extrusion

Molenaar, J., Koopmans, R. J. & Doelder, den, C. F. J., 1998, In: Physical Review E: Statistical, Physics, Plasmas, Fluids, and Related Interdisciplinary Topics. 58, 4, p. 4683-4691 9 p.

Research output: Contribution to journal › Article › Academic › peer-review

27 Citations (Scopus)

6 Downloads (Pure)

Quantitative modelling of HDPE spurt experiments using wall slip and generalised Newtonian flow

Doelder, den, C. F. J., Koopmans, R. J. & Molenaar, J., 1998, In: Journal of Non-Newtonian Fluid Mechanics. 79, 2-3, p. 503-514 12 p.

Research output: Contribution to journal › Article › Academic › peer-review

27 Citations (Scopus)

2 Downloads (Pure)

1997

A collection of modelling problems carried out in the academic year 1995-1996 by the ECMI-students at the Eindhoven University of Technology

Antens, J. C. A. M., Bakema, J., Beckker, M., Capellini, A., Cramwinckel, J., Doelder, den, C. F. J., Doortmont, D. F., Haan, de, S., Hanneman, F. A., Hoffmans, W. G. J., Knops, Y. M. M., Lebouille, M. F. G., Nolan, E., Overbeek, S. D., Pergamentsev, S. Y., Ptitchkina, I., Saastamoinen, J., Scholten, I., Tel, W. T. & van der Velde, A. G. I. & 4 others, van Weert, M. M. J., van der Werff Ten Bosch, J. D., van Woudenberg, T. A. & Wu, H. T., 1997, Eindhoven: Eindhoven University of Technology. 500 p. (Opleiding wiskunde voor de industrie Eindhoven : student report; vol. 9709)

Research output: Book/Report › Report › Popular

Open Access

File

63 Downloads (Pure)

1996

Sharkskin and sport in JSO modelled polymer extrusion

Doelder, den, C. F. J. & Technische Universiteit Eindhoven (TUE). Stan Ackermans Instituut. Mathematics for Industry (MI), 1996, Eindhoven: Eindhoven University of Technology.

Research output: Thesis › EngD Thesis

1995

Het koelsysteem van Bavaria

Doelder, den, C. F. J. & Hanneman, F. A., 1995, Eindhoven: Eindhoven University of Technology. 41 p. (Opleiding wiskunde voor de industrie Eindhoven : student report; vol. 9507)

Research output: Book/Report › Report › Popular

Open Access

File

720 Downloads (Pure)

C.F.J. (Jaap) den Doelder, PDEng

Research output

Search results