• 20 Citations
20022017
If you made any changes in Pure these will be visible here soon.

Personal profile

Research profile

Aant van der Zee is an assistant professor with the research group Information Systems in the Built Environment at the department of the Built Environment (research program Design and Decision Support Systems). The ISBE Group carries out research and education in the field of information systems used for the engineering and management of the built environment, into which they are embedded. This leads to new ICT methods and techniques in the context of building sciences and urban sciences. 

Academic background

Aant van der Zee was a research assistant at TU/e until 1990, when he became a technical draughtsman at Adviesbureau Tielemans (Eindhoven) and subsequently an architectural draughtsman with Architect Th. J. Lammers (Beek en Donk). From 1991 until 1993, Aant van der Zee worked for engineering firm ACE (Geldrop) and from 1993 until 1997, he was a project engineer at Haegens Holland (Horst). From 1997 until 2002, he was a software engineer at Twee Snoeken Automatisering (‘s Hertogenbosch) after which he was appointed as assistant professor in the Design Systems group of the department of the Built Environment of TU/e. 

Research Output 2002 2017

  • 20 Citations
  • 15 Conference contribution
  • 2 Article

3D concrete printing in architecture: a research on the potential benefits of 3D printing in architecture

van der Zee, A. & Marijnissen, M. P. A. M., 28 Sep 2017, ShoCK – Sharing of Computable Knowledge - Proceedings of the 35 th International Confer- ence on Education and Research in Computer Aided Architectural Design in Europe, Rome, Italy, 20 th -22 nd September 2017. Fioravanti, A., Cursi, S., Elahmar, S., Gargaro, S., Loffreda, G., Novembri, G. & Trento, A. (eds.). Rome: eCAADe, Vol. 2, p. 299-308

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Printing
Concretes
Structural design
Forms (concrete)
Concrete mixtures

Development of a multi-desciplinary university wide design course

Vries, de, B., Grond, M. M. G. J. J. & Zee, van der, A., 2015, The Next city : New technologies and futures of the built environment : 16th International Conference, CAAD Futures 2015, Sao Paulo, July 8-10, 2015. Celani, G., Sperling, D. M. & Franco, J. M. S. (eds.). Sao Paulo: Universidade Estadual de Campinas, p. 37-46

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File

From rapid prototyping to automated manufacturing

van der Zee, A., de Vries, B. & Salet, T. A. M., 2014, Proceedings of the 32nd eCAADe Conference, 10-12 September 2014, Newcastle upon Tyne, United Kingdom. Thompson, E. M. (ed.). Newcastle upon Tyne, England: Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, p. 445-461

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Rapid prototyping
Nozzles
Printing
Materials properties

Modeling of RL-Cities

Zee, van der, A. & Vries, de, B., 2012, Proceedings of the 30th International conference on education and research in computer aided architectural design in Europe (eCAADe 2012), September 12-14 2012, Prague, Chech Republic. Pavlicek, J., Hulin, J., Matejovska, D. & Achten, H. (eds.). Prague: eCAADe and CVUT, Faculty of Architecture, p. 375-380

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Urban planning
Knowledge based systems

Out of the box design : pedagogical approach on generative design teaching

Zee, van der, A. & Vries, de, B., 2011, Proceedings of the 29th conference on Education in Computer Aided Architectural Design in Europe (eCAADe 2011), Ljubljana Slovenis, September, 21-24, 2011. Zupancic, T., Juvancic, M., Verovsek, S. & Jutraz, A. (eds.). Ljubljana: University of Ljubljana, Faculty of Architecture, p. 709-715

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

Teaching
Studios
Students
Architectural design

Student theses

3D concrete printing in architecture: a research on the potential benefits of 3D concrete printing in the construction of residential buildings in the Netherlands

Author: Marijnissen, M., 31 Aug 2016

Supervisor: de Vries, B. (Supervisor 1), van der Zee, A. (Supervisor 2) & Willems, M. (Supervisor 2)

Student thesis: Master

File

Building an implementation strategy to enhance knowledge capture: the intricacies of implementating a cloud-based tool, a case study

Author: Duarte Duarte, M., 31 Aug 2017

Supervisor: de Vries, B. (Supervisor 1), van der Zee, A. (Supervisor 2), Trienekens, J. (Supervisor 2) & Vogel, H. (External person) (External coach)

Student thesis: Master

File

Business ecosystems and the transition to the circular economy: an explorative research into the process of circular business model innovation in a business ecosystem

Author: Chaïbi, H., 31 Aug 2018

Supervisor: van der Zee, A. (Supervisor 1), Han, Q. (Supervisor 2) & van Hout - van Delft, C. E. (External person) (External coach)

Student thesis: Master

File

Customization in architecture using virtual reality

Author: Kaiser, S., 31 Aug 2017

Supervisor: de Vries, B. (Supervisor 1), van der Zee, A. (Supervisor 2), Willems, M. (Supervisor 2) & Jessurun, A. (Supervisor 2)

Student thesis: Master

File

Exploring the idea of automating tower cranes: an analysis of opportunities and challenges for automating tower cranes on construction sites

Author: Pouw, J., 27 Feb 2018

Supervisor: Mazairac, L. (Supervisor 1), van der Zee, A. (Supervisor 2), Veerman, M. T. (External person) (External coach) & de Vries, B. (Supervisor 2)

Student thesis: Master

File