Research Output per year
Research Output 1969 2019
- 1 - 50 out of 614 results
- Publication Year, Title (descending)
2019
A cohesive XFEM model for simulating fatigue crack growth under mixed-mode loading and overloading
Dekker, R., van der Meer, F. P., Maljaars, J. & Sluys, L. J., 8 Jun 2019, In : International Journal for Numerical Methods in Engineering. 118, 10, p. 561-577 17 p.Research output: Contribution to journal › Article › Academic › peer-review
Open Access
File
Fatigue Crack Growth
Mixed Mode
Fatigue crack propagation
Adaptive Meshing
Cohesive Zone Model
An approach to develop printable strain hardening cementitious composites
Chaves Figueiredo, S., Romero Rodríguez, C., Ahmed, Z., Bos, D. H., Xu, Y., Salet, T., Çopuroglu, O., Schlangen, E. & Bos, F., 14 Mar 2019, In : Materials & Design. 2019, 169, 17 p., 107651Research output: Contribution to journal › Article › Academic › peer-review
Open Access
File
Strain hardening
Rheology
Yield stress
Composite materials
Printing
Bio-based composite footbridge: Design, production and in situ monitoring
Blok, R., Smits, J., Gkaidatzis, R. & Teuffel, P., 11 Jun 2019, In : Structural Engineering International.Research output: Contribution to journal › Article › Academic › peer-review
Open Access
Footbridges
Natural fibers
Monitoring
Composite materials
Polymers
Design, construction and monitoring of an ice composite shell structure
Wu, Y., Liu, X., Chen, B., Li, Q., Luo, P. & Pronk, A., 1 Oct 2019, In : Automation in Construction. 106, 13 p., 102862Research output: Contribution to journal › Article › Academic › peer-review
Shells (structures)
Ice
Monitoring
Composite materials
Masonry construction
Digital concrete: a review
Wangler, T., Roussel, N., Bos, F., Salet, T. & Flatt, R., 13 Jun 2019, In : Cement and Concrete Research. 123, 17 p., 105780Research output: Contribution to journal › Article › Academic › peer-review
Concretes
Fabrication
Rheology
Hydration
Printing
Ductility of 3D printed concrete reinforced with short straight steel fibers
Bos, F. P., Bosco, E. & Salet, T. A. M., 2019, In : Virtual and Physical Prototyping. 14, 2, p. 160-174 15 p.Research output: Contribution to journal › Article › Academic › peer-review
Open Access
File
Ductility
Steel fibers
Reinforced Concrete
Straight
Reinforced concrete
Environmental optimization of precast concrete beams using fibre reinforced polymers
van Loon, R. R. L., Pujadas, E., Moonen, F. & Blok, R., 5 Apr 2019, In : Sustainability. 11, su11072174, p. 1-12 2174Research output: Contribution to journal › Article › Academic › peer-review
Open Access
File
Precast concrete
polymer
Fibers
Polymers
Reinforced concrete
Evaluation of latent heat storage in mortars containing microencapsulated paraffin waxes – a selection of optimal composition and binders
Lucas, S. S. & Barroso de Aguiar, J. L., 20 Feb 2019, In : Heat and Mass Transfer/Waerme- und Stoffuebertragung.Research output: Contribution to journal › Article › Academic › peer-review
Open Access
Paraffin waxes
heat storage
Heat storage
phase change materials
waxes
Fatigue life prediction of hot riveted double covered butt joints
Maljaars, J., Leonetti, D. & Maas, C., 1 Jul 2019, In : International Journal of Fatigue. 124, p. 99-112 14 p.Research output: Contribution to journal › Article › Academic › peer-review
Fatigue Life Prediction
Fatigue Strength
Fatigue of materials
Rivets
Steel
Fatigue life prediction of hot-riveted shear connections using system reliability
Leonetti, D., Maljaars, J. & Snijder, H. H., 2019, In : Engineering Structures. 186, p. 471-483 13 p.Research output: Contribution to journal › Article › Academic › peer-review
Fatigue of materials
Rivets
Riveting
Structural members
Steel structures
Hardened properties of 3D printed concrete: the influence of process parameters on interlayer adhesion
Wolfs, R. J. M., Bos, F. P. & Salet, T. A. M., 2019, In : Cement and Concrete Research. 199, p. 132-140Research output: Contribution to journal › Article › Academic › peer-review
Adhesion
Concretes
Printing
Nozzles
3D printers
In-plane behaviour of clay brick masonry wallettes retrofitted with single-sided fabric-reinforced cementitious matrix and deep mounted carbon fibre strips
Türkmen, S., De Vries, B. T., Wijte, S. N. M. & Vermeltfoort, A. T., 25 Mar 2019, In : Bulletin of Earthquake Engineering.Research output: Contribution to journal › Article › Academic › peer-review
Open Access
masonry
bricks
Brick
carbon fibers
clays
Multi-scale modelling of granular materials: numerical framework and study on micro-structural features
Liu, J., Bosco, E. & Suiker, A. S. J., 1 Feb 2019, In : Computational Mechanics. 63, 2, p. 409–427 19 p.Research output: Contribution to journal › Article › Academic › peer-review
Open Access
File
Multiscale Modeling
Granular Materials
Granular materials
Macros
Anisotropy
On the effects of unilateral boundary conditions on the crack growth rate under cycling bending loads
Pucillo, G. P., Esposito, L. & Leonetti, D., 1 Jul 2019, In : International Journal of Fatigue. 124, p. 245-252 8 p.Research output: Contribution to journal › Article › Academic › peer-review
Crack Growth Rate
Notch
Cycling
Crack propagation
Boundary conditions
Punching shear failure of welded rectangular hollow section joints in aluminium
Manders, W. W. J., Maljaars, J., Belin, B. & Lukić, M., 4 Jul 2019, In : Construction Métallique. 2019, 2, p. 119-142 22 p.Research output: Contribution to journal › Article › Academic › peer-review
Punching
Aluminum
Steel structures
Failure modes
Welds
Rekenregels beoordeling bestaande breedplaatvloeren: Resultaten onderzoek constructieve veiligheid in bestaande utiliteitsgebouwen
Wijte, S. & Dieteren, G. G. A., 1 Jun 2019, In : Cement. 2019, 4, p. 30-39 10 p.Research output: Contribution to journal › Article › Professional
Open Access
File
Revision of EN 1993-1-11 – fatigue design rules for tension components
Annan, R., Bechtold, M., Friedrich, H., Maljaars, J., Misiek, T. & Paschen, M., 20 Jun 2019, In : Steel Construction - Design and Research. 12, 2, p. 1-15 16 p.Research output: Contribution to journal › Article › Academic › peer-review
Fatigue of materials
Structural failure during extrusion-based 3D printing processes
Wolfs, R. J. M. & Suiker, A. S. J., 6 Jun 2019, In : International Journal of Advanced Manufacturing Technology.Research output: Contribution to journal › Article › Academic › peer-review
Open Access
Extrusion
Printing
Curing
Buckling
Finite element method
The 2017–18 design and construction of ice composite structures in Harbin
Pronk, A., Mistur, M., Li, Q., Liu, X., Blok, R., Liu, R., Wu, Y., Luo, P. & Dong, Y., 1 Apr 2019, In : Structures. 18, p. 117-127 11 p.Research output: Contribution to journal › Article › Academic › peer-review
Composite structures
Ice
Composite materials
Towers
Fibers
Triaxial compression testing on early age concrete for numerical analysis of 3D concrete printing
Wolfs, R., Bos, F. & Salet, T., 2 Jun 2019, In : Cement & Concrete Composites. 104, 12 p., 103344Research output: Contribution to journal › Article › Academic › peer-review
Compression testing
Printing
Numerical analysis
Concretes
Buckling
Two-way coupled CFD fire and thermomechanical FE analyses of a self-supporting sandwich panel façade system
de Boer, J. G. G. M., Hofmeyer, H., Maljaars, J. & van Herpen, R., 2019, In : Fire Safety Journal. 105, p. 154-168 15 p.Research output: Contribution to journal › Article › Academic › peer-review
Open Access
File
Facades
charge flow devices
Computational fluid dynamics
Fires
screws
2018
3D Printing Concrete on temporary surfaces: The design and fabrication of a concrete shell structure
Borg Costanzi, C., Ahmed, Z. Y., Schipper, H. R., Bos, F. P., Knaack, U. & Wolfs, R. J. M., 1 Oct 2018, In : Automation in Construction. 94, p. 395-404 10 p.Research output: Contribution to journal › Article › Academic › peer-review
Printing
Concretes
Fabrication
Adhesive pastes
Casting
A combined experimental and numerical examination of welding residual stresses
Rikken, M., Pijpers, R., Slot, H. & Maljaars, J., 1 Nov 2018, In : Journal of Materials Processing Technology. 261, p. 98-106 9 p.Research output: Contribution to journal › Article › Academic › peer-review
Residual stresses
Welding
Superconducting transition temperature
Phase transitions
Dilatometers
A general bearing deformation model for timber : compression perpendicular to grain
Leijten, A. J. M., 2018, In : Construction and Building Materials. 165, p. 707-716Research output: Contribution to journal › Article › Academic › peer-review
Bearings (structural)
Timber
Compaction
Wood
A method for studying climate-related changes in the condition of decorated wooden panels
Ekelund, S., van Duin, P. H. J. C., Jorissen, A. J. M., Ankersmit, B. & Groves, R. M., 2018, In : Studies in Conservation. 63, 2, p. 62-71 10 p.Research output: Contribution to journal › Article › Academic › peer-review
Open Access
File
Climate
Fluctuations
Humidity
Material Properties
Rijksmuseum
Automated two-way coupling of CFD fire simulations to thermomechanical FE analyses at the overall structural level
Feenstra, J. A., Hofmeyer, H., van Herpen, R. A. P. & Mahendran, M., 2018, In : Fire Safety Journal. 96, p. 165-175 11 p.Research output: Contribution to journal › Article › Academic › peer-review
charge flow devices
Computational fluid dynamics
Fires
Facades
simulation
Correlation between destructive compression tests and non-destructive ultrasonic measurements on early age 3D printed concrete
Wolfs, R. J. M., Bos, F. P. & Salet, T. A. M., 14 Jun 2018, In : Construction and Building Materials. 181, p. 447-454 8 p.Research output: Contribution to journal › Article › Academic › peer-review
Ultrasonic measurement
Quality control
Concretes
Compressive strength
Printing
Design of a 3D printed concrete bridge by testing
Salet, T. A. M., Ahmed, Z. Y., Bos, F. P. & Laagland, H. L. M., 1 Jun 2018, In : Virtual and Physical Prototyping. 13, 3, p. 222-236 15 p.Research output: Contribution to journal › Article › Academic › peer-review
Open Access
File
Concrete bridges
Concretes
Testing
3D printers
Traffic Network
Direct strength method for web crippling—Lipped channels under EOF and IOF loading
Heurkens, R. A. J., Hofmeyer, H., Mahendran, M. & Snijder, H. H., 2018, In : Thin-Walled Structures. 123, p. 126-141Research output: Contribution to journal › Article › Academic › peer-review
Plastics
Buckling
Experiments
Early age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing
Wolfs, R. J. M., Bos, F. P. & Salet, T. A. M., 9 Feb 2018, In : Cement and Concrete Research. 106, April 2018, p. 103-116 14 p.Research output: Contribution to journal › Article › Academic › peer-review
Concretes
Internal friction
Testing
Poisson ratio
Shear strength
Effective second moment of area of uniform built-up members
Snijder, H. H., Apr 2018, In : Stahlbau. 87, 4, p. 323-331 9 p.Research output: Contribution to journal › Article › Academic › peer-review
Open Access
File
Stiffness
Shear deformation
Amplification
Numerical models
Fatigue resistance of the deck plate in steel orthotropic deck structures
Maljaars, J., Bonet, E. & Pijpers, R. J. M., 1 Oct 2018, In : Engineering Fracture Mechanics. 201, p. 214-228Research output: Contribution to journal › Article › Academic › peer-review
Steel
Fatigue of materials
Cracks
Crack detection
Stringers
Fracture behaviour of historic and new oak wood
Luimes, R. A., Suiker, A. S. J., Verhoosel, C. V., Jorissen, A. J. M. & Schellen, H. L., 1 Sep 2018, In : Wood Science and Technology. 52, 5, p. 1243–1269Research output: Contribution to journal › Article › Academic › peer-review
Open Access
File
Wood
Quercus
Museums
Painting
damage
Hygro-mechanical response of oak wood cabinet door panels under relative humidity fluctuations
Luimes, R. A., Suiker, A. S. J., Jorissen, A. J. M., van Duin, P. H. J. C. & Schellen, H. L., 6 Dec 2018, In : Heritage Science. 6, 1, 72Research output: Contribution to journal › Article › Academic › peer-review
Open Access
File
fluctuation
museum
damages
climate
energy shortage
Lateral torsional buckling design imperfections for use in non-linear FEA
Snijder, H. H., van der Aa, R. P., Hofmeyer, H. & van Hove, B. W. E. M., 1 Feb 2018, In : Steel Construction - Design and Research. 11, 1, p. 49-56 8 p.Research output: Contribution to journal › Article › Academic › peer-review
Open Access
File
Buckling
Defects
Torsional stress
Steel
Mechanical performance of wall structures in 3D printing processes: theory, design tools and experiments
Suiker, A. S. J., 16 Jan 2018, In : International Journal of Mechanical Sciences. 137, p. 145-170 26 p.Research output: Contribution to journal › Article › Academic › peer-review
Open Access
File
printing
Buckling
Printing
buckling
Experiments
Nanotecnologia na construção civil: materiais fotocatalíticos contribuem para a sustentabilidade dos edifícios
Lucas, S. S., 2018, In : Betão. 40, p. 32-33 2 p.Research output: Contribution to journal › Article › Professional
Open Access
File
nanotechnology
building
sustainability
engineering
On the role of moisture in triggering out-of-plane displacement in paper : from the network level to the macroscopic scale.
Bosco, E., Peerlings, R. H. J., Lomans, B. A. G., van der Sman, C. G. & Geers, M. G. D., 2018, In : International Journal of Solids and Structures. 154, p. 66-77Research output: Contribution to journal › Article › Academic › peer-review
Moisture
moisture
Fiber
expansion
fibers
Rethinking reinforcement for digital fabrication with concrete
Asprone, D., Menna, C., Bos, F. P., Salet, T. A. M., Mata-Falcón, J. & Kaufmann, W., 1 Oct 2018, In : Cement and Concrete Research. 112, p. 111-121Research output: Contribution to journal › Article › Academic › peer-review
Reinforcement
Concretes
Concrete construction
Fabrication
Reinforced concrete
Scale effects in the hygro-thermo-mechanical response of fibrous networks
Bosco, E., Peerlings, R. H. J. & Geers, M. G. D., 1 Sep 2018, In : European Journal of Mechanics, A/Solids. 71, p. 113-121 9 p.Research output: Contribution to journal › Article › Academic › peer-review
scale effect
Moisture
Microstructure
Ink jet printing
Digital printing
Sensitivity analysis of airfoil aerodynamics during pitching motion at a Reynolds number of 1.35×105
Geng, F., Kalkman, I., Suiker, A. S. J. & Blocken, B., 1 Dec 2018, In : Journal of Wind Engineering and Industrial Aerodynamics. 183, p. 315-332 18 p.Research output: Contribution to journal › Article › Academic › peer-review
Open Access
File
Turbulence models
Airfoils
Sensitivity analysis
Aerodynamics
Reynolds number
Splitting of timber beams caused by perpendicular to grain forces of multiple connections
Leijten, A. J. M., 15 Sep 2018, In : Engineering Structures. 171, p. 10-14 5 p.Research output: Contribution to journal › Article › Academic › peer-review
Timber
Experiments
Stiffness plasticity degradation of masonry mortar under compression: preliminary results: Perda de rigidez da argamassa de assentamento da alvenaria comprimida: resultados preliminares
Mohamad, G., Fonseca, F. S., Vermeltfoort, A. T. & Lubeck, A., 1 Apr 2018, In : IBRACON Structures and Materials Journal. 11, 7, p. 279-295 17 p.Research output: Contribution to journal › Article › Academic › peer-review
Open Access
File
Mortar
Plasticity
Stiffness
Degradation
Poisson ratio
Study of self-healing properties in concrete with bacteria encapsulated in expanded clay
Lucas, S. S., Moxham, C., Tziviloglou, E. & Jonkers, H., 3 Dec 2018, In : Science and Technology of Materials. 30, suppl. 1, p. 93-98 6 p.Research output: Contribution to journal › Article › Academic › peer-review
Bacteria
Clay
Concretes
Cracks
Service life
Toolbox for super-structured and super-structure free multi-disciplinary building spatial design optimisation
Boonstra, S., van der Blom, K., Hofmeyer, H., Emmerich, M. T. M., van Schijndel, A. W. M. & de Wilde, P., 20 Mar 2018, In : Advanced Engineering Informatics. 36, p. 86-100 15 p.Research output: Contribution to journal › Article › Academic › peer-review
Open Access
File
Demonstrations
Design optimization
Hot Temperature
Use of HSS and VHSS in steel structures in civil and offshore engineering
van Es, S., Slot, H., Steenbergen, H., Maljaars, J. & Pijpers, R., 12 Nov 2018, In : Steel Construction. 11, 4, p. 249-256 8 p.Research output: Contribution to journal › Article › Academic › peer-review
Steel structures
High strength steel
Fracture toughness
Tensile strength
Fatigue of materials
2017
A 2-dimension dynamic Bayesian network for large-scale degradation modelling with an application to a bridges network
Kosgodagan, A., Morales-Napoles, O., Yeung, T. G., Courage, W., Maljaars, J. & Castanier, B., 2017, In : Computer-Aided Civil and Infrastructure Engineering. 32, 8, p. 641-656 15 p.Research output: Contribution to journal › Article › Academic › peer-review
Bayesian networks
Degradation
Steel bridges
Markov processes
A new method for fatigue life prediction based on the Thick Level Set approach
Voormeeren, L. O., van der Meer, F. P., Maljaars, J. & Sluys, L. J., 1 Sep 2017, In : Engineering Fracture Mechanics. 182, p. 449-466 18 p.Research output: Contribution to journal › Article › Academic › peer-review
Fatigue of materials
Steel
Strain energy
Fracture mechanics
Free energy
Assessment of hyperelastic material models for the application of adhesive point-fixings between glass and metal
Dispersyn, J., Hertelé, S., De Waele, W. & Belis, J., 1 Sep 2017, In : International Journal of Adhesion and Adhesives. 77, p. 102-117 16 p.Research output: Contribution to journal › Article › Academic › peer-review
Adhesives
Metals
Glass
Experiments
Curve fitting
Asymptotic homogenization of hygro-thermo-mechanical properties of fibrous networks
Bosco, E., Peerlings, R. H. J. & Geers, M. G. D., Jun 2017, In : International Journal of Solids and Structures. 115–116, p. 180–189 10 p.Research output: Contribution to journal › Article › Academic › peer-review
Open Access
File
homogenizing
Homogenization
Mechanical Properties
Fiber
mechanical properties