Research Output

Filter
Conference contribution
2020

3D Concrete Printing - Free Form Geometries with Improved Ductility and Strength

Ahmed, Z. Y., Biffi, A., Hass, L., Bos, F. P. & Salet, T. A. M., 8 Jul 2020, Second RILEM International Conference on Concrete and Digital Fabrication: Digital Concrete 2020. Bos, F., Lucas, S., Wolfs, R. & Salet, T. (eds.). Springer, Vol. 28.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Bending and Pull-Out Tests on a Novel Screw Type Reinforcement for Extrusion-Based 3D Printed Concrete

Hass, L. & Bos, F. P., 8 Jul 2020, Second RILEM International Conference on Concrete and Digital Fabrication: Digital Concrete 2020. Springer, Vol. 28.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Bond of Reinforcement Cable in 3D Printed Concrete

Bos, F. P., Dezaire, S., Ahmed, Z. Y., Hoekstra, A. & Salet, T. A. M., 8 Jul 2020, Second RILEM International Conference on Concrete and Digital Fabrication: Digital Concrete 2020. Bos, F., Lucas, S., Wolfs, R. & Salet, T. (eds.). Springer, Vol. 28. (RILEM Bookseries).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Complex Architecture in Printed Concrete: The Case of the Innsbruck University 350th Anniversary Pavilion COHESION

Grasser, G., Pammer, L., Koell, H., Werner, E. & Bos, F. P., 8 Jul 2020, Second RILEM International Conference on Concrete and Digital Fabrication: Digital Concrete 2020. Springer

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Inspection Methods for 3D Concrete Printing

Buswell, R., Kinnell, P., Xu, J., Hack, N., Kloft, H., Maboudi, M., Gerke, M., Massin, P., Grasser, G., Wolfs, R. J. M. & Bos, F. P., 8 Jul 2020, Second RILEM International Conference on Concrete and Digital Fabrication: Digital Concrete 2020. Springer

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Quality Assessment of Printable Strain Hardening Cementitious Composites Manufactured in Two Different Printing Facilities

Chaves Figueiredo, S., Overmeir, van, A. L., Nefs, K., Schlangen, E., Salet, T. A. M., Savija, B., Suiker, A. S. J. & Bos, F. P., 8 Jul 2020, Second RILEM International Conference on Concrete and Digital Fabrication: Digital Concrete 2020. Bos, F., Lucas, S., Wolfs, R. & Salet, T. (eds.). Springer

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2019

3D printed grid shell in ice composite

Pronk, A. D. C., Bouw, I., Ezendam, T., van Hierden, N., Vleeshouwers, J. & van de Weijden, D., 6 Oct 2019, Proceedings of the IASS Annual Symposium 2019 – Structural Membranes 2019 Form and Force. Lázaro, C., Bletzinger, K-U. & Oñate, E. (eds.). International Association for Shell and Spatial Structures (IASS) , 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
7 Downloads (Pure)

Added value of regular in-service visual inspection to the fatigue reliability of structural details in steel bridges

Hashemi, S., Maljaars, J. & Snijder, B., 2019, 5th International Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures – SMAR 2019: Proceedings. p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
7 Downloads (Pure)

Analysing optimisation data for multicriteria building spatial design

van der Blom, K., Boonstra, S., Hofmeyer, H. & Emmerich, M. T. M., 2019, Evolutionary Multi-Criterion Optimization - 10th International Conference, EMO 2019, Proceedings. Coello Coello, C. A., Reed, P., Deb, K., Goodman, E., Klamroth, K., Miettinen, K. & Mostaghim, S. (eds.). Springer, p. 671-682 12 p. (Lecture Notes in Computer Science ; vol. 11411).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

1 Citation (Scopus)
5 Downloads (Pure)

Bio-based construction materials for a sustainable future

Blok, R., Kuit, B., Schröder, T. & Teuffel, P., 2019, 20th Congress of IABSE, New York City 2019: The Evolving Metropolis - Report. p. 860-866 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
63 Downloads (Pure)

BioMat pavilion 2018: development, fabrication and erection of a double curved segmented shell from biocomposite elements

Dahy, H., Peters, J., Bos, D. H., Baszynski, P., Habraken, A. P. H. W. & Teuffel, P., 2019, Proceedings of the IASS Annual Symposium 2019: Form and Force. p. 2862-2871 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

1 Downloads (Pure)

Boundary conditions effects on the crack growth mechanism under cycling bending

Pucillo, G. P., Leonetti, D. & Esposito, L., 2019, 2019 Joint Rail Conference, JRC 2019. American Society of Mechanical Engineers, 6 p. JRC2019-1274

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Characterization of variable stiffness joints for adaptive structures

Wang, Q., Teuffel, P., Habraken, A. P. H. W., Jansen, K. & Senatore, G., 22 Aug 2019, Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications: Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Computation (SEMC 2019), September 2-4, 2019, Cape Town, South Africa. Zingoni, A. (ed.). CRC Press, p. 1045-1050 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2 Downloads (Pure)

Co-evolutionary design processes applied to building spatial design optimization

Boonstra, S., van der Blom, K., Hofmeyer, H. & Emmerich, M. T. M., 31 May 2019, Advances in Structural and Multidisciplinary Optimization: Proceedings of the 13th World Congress of Structural and Multidisciplinary Optimization (WCSMO13). Guo, X. & Huang, H. (eds.). Beijing: ISSMO, p. 110-115 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

5 Downloads (Pure)

Effects of 3D zoning of spatial designs on the performance of structure systems

Hofmeyer, H., Claessens, D. P. H., Boonstra, S. & de Vries, B., 2019, Intelligent and Informed - Proceedings of the 24th International Conference on Computer-Aided Architectural Design Research in Asia, CAADRIA 2019. Haeusler, M. H., Schnabel, M. A. & Fukuda, T. (eds.). Hong Kong: The Association for Computer-Aided Architectural Design Research in Asia (CAADRIA), Vol. 1. p. 205-214 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
2 Citations (Scopus)
11 Downloads (Pure)

Evaluating memetic building spatial design optimisation using hypervolume indicator gradient ascent

van der Blom, K., Boonstra, S., Wang, H., Hofmeyer, H. & Emmerich, M. T. M., 2019, Numerical and Evolutionary Optimization – NEO 2017. Schutze, O., Trujillo, L., Maldonado, Y. & Valle, P. (eds.). Cham: Springer, p. 62-86 25 p. (Studies in Computational Intelligence; vol. 785).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

1 Citation (Scopus)
3 Downloads (Pure)

Evaluation of clamping force in hot-driven rivets of the Botlekbrug

Leonetti, D., Maljaars, J. & Snijder, B., 2019, Proceedings of the Belgian-Dutch IABSE Young Engineers Colloquium 2019, YEC 2019. De Pauw, B., Leonetti, D., Snijder, H. H. & De Pauw, B. (eds.). Belgian and Dutch National Groups of IABSE, p. 76-77 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Experimental research on clicked versus ridged aluminium connections

van Hove, B. W. E. M. D. & Maljaars, J., 13 Nov 2019, Proceedings of the 14th International Aluminium Conference. (INALCO2019). Tokyo, p. 156-157 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Experimental research on the strength of screws applied in aluminium screw channels

van Hove, B. W. E. M. D. & Maljaars, J., 13 Nov 2019, Proceedings of the 14th International Aluminium Conference. (INALCO2019). Maljaars, J. (ed.). Tokyo, p. 158-159 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Fatigue assessment of an existing orthotropic steel deck to comply with future traffic intensity

Nagy, W., De Backer, H., Thierens, G., Blontrock, H., Van Bogaert, P., Reynaert, K. & Maljaars, J., 1 Jan 2019, 20th Congress of IABSE, New York City 2019: The Evolving Metropolis - Report. International Association for Bridge and Structural Engineering, p. 712-718 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Integration of form-finding, analysis process and production of a bending-active textile hybrid into one model

Vorstermans, R. L. G., van Wijk, J., Teuffel, P., Habraken, A. P. H. W. & Houtman, R., 2019, Proceedings of the TensiNet Symposium 2019: Softening the habits. p. 123-134 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
13 Downloads (Pure)

Probabilistic approach to evaluate fatigue safety status in steel railway bridges

Hashemi, B., Maljaars, J. & Snijder, B., 2019, Proceedings of the Belgian-Dutch IABSE Young Engineers Colloquium 2019, YEC 2019. De Pauw, B., Leonetti, D., Snijder, H. H. & De Pauw, B. (eds.). Belgian and Dutch National Groups of IABSE, p. 36-37 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Rainwater ponding on roof structures with interaction between main girders and purlins

Snijder, B. & Wijte, S., 2019, 20th Congress of IABSE New York City 2019: The Evolving Metropolis - Report. Zurich: International Association for Bridge and Structural Engineering, p. 150-157 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Realistic structural stabilization based on spatial zoning

Boonstra, S., Claessens, D. P. H., Hofmeyer, H. & de Vries, B., 3 Jul 2019, 26th International Workshop on Intelligent Computing in Engineering. Geyer, P., Allacker, K., Schevenels, M., de Troyer, F. & Pauwels, P. (eds.). Leuven: Katholieke Universiteit Leuven, 10 p. 15. (CEUR Workshop Proceedings; vol. 2394).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
7 Downloads (Pure)

Stability interaction effects in 3D steel frames: a case study

Snijder, B., Titulaer, L. H. J. D., Teeuwen, P. A. & Hofmeyer, H., 2019, Proceedings of the International Colloquia on Stability and Ductility of Steel Structures (SDSS 2019), September 11-13, 2019, Prague, Czech Republic. Wald, F. & Jandera, M. (eds.). Boca Raton: CRC Press Taylor & Francis Group, p. 1025-1033 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Structural behavior of ice composite for 3D printing

Pronk, A. D. C., Jansen, D., Kara, K., Van Laar, J. & Willems, H., 6 Oct 2019, Proceedings of the IASS Annual Symposium 2019 – Structural Membranes 2019 Form and Force. Lázaro, C., Bletzinger, K-U. & Oñate, E. (eds.). International Association for Shell and Spatial Structures (IASS) , 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
4 Downloads (Pure)

The influence of material temperature on the in-print strength and stability of a 3D print mortar

Bos, F., Wolfs, R., Hermens, L. & Salet, T., 22 Aug 2019, Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications - Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Computation, 2019. Zingoni, A. (ed.). CRC Press/Balkema, p. 425-430 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2 Citations (Scopus)
2 Downloads (Pure)

Verification of the energy flow analysis method as identification tool for damping in high-rise buildings

Talib, I., Bronkhorst, O., Pruiksma, J. & Suiker, A., 1 Jan 2019, Proceedings of the Belgian-Dutch IABSE Young Engineers Colloquium 2019, YEC 2019. De Pauw, B., Leonetti, D., Snijder, H. H. & De Pauw, B. (eds.). Zoetermeer: Belgian and Dutch National Groups of IABSE, p. 98-99 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2018

3D printed concrete bridge

Salet, T. A. M., Ahmed, Z. Y., Bos, F. P. & Laagland, H. L. M., 1 Jan 2018, Proceedings of the 3rd International Conference on Progress in Additive Manufacturing (Pro-AM 2018). p. 2-9 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
3 Citations (Scopus)
1 Downloads (Pure)

A new model for fatigue load sequence effects in offshore wind turbine substructures and its implications for design life

Dragt, R. C., Hengeveld, S. T. & Maljaars, J., 1 Jan 2018, Proceedings of the 28th International Ocean and Polar Engineering Conference, ISOPE 2018. International Society of Offshore and Polar Engineers, p. 265-272 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Asymmetric high performance SIPS panels for loadbearing walls

Jorissen, A. J. M., van Rie, J. L. G., van Roestel, R. P. & Hofmeyer, H., 2018, Proceedings of 2018 World Conference on Timber Engineering WCTE 2018. Seoul: National Institute of Forest Science, 8 p. S163

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

A vibration control strategy using variable stiffness joints

Wang, Q., Senatore, G., Kaymenaki, V., Habraken, A. P. H. W. & Teuffel, P. M., 2018, Proceedings of the IASS Symposium 2018: Creativity in Structural Design. 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Bond slip behaviour of deep mounted carbon fibre reinforced polymer strops confined with a ductile adhesive in clay brick masonry

Türkmen, Ö. S., Wijte, S. N. M. & Vermeltfoort, A. T., 14 Feb 2018, Prtoceedings of the 10th Australasian Masonry Conference : Masonry Today and Tomorrow. Masia, M., Alternam, D., Totoev, Y. & Page, A. (eds.). p. 672-686

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
23 Downloads (Pure)

Climate-induced damage in historical cabinet doors

Luimes, R. A., Suiker, A. S. J., Jorissen, A. J. M., Schellen, H. L. & van Duin, P. H. J. C., 1 Jan 2018, World Conference on Timber Engineering 2018. p. 1-2 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
20 Downloads (Pure)

Coupling between a building spatial design optimisation toolbox and BouwConnect BIM

Boonstra, S., van der Blom, K., Hofmeyer, H., van den Buijs, J. & Emmerich, M. T. M., 4 Oct 2018, Advances in Informatics and Computing in Civil and Construction Engineering: Proceedings of the 35th CIB W78 2018 Conference: IT in Design, Construction, and Management. Mutis, I. & Hartman, T. (eds.). Cham: Springer, p. 95-102 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
76 Downloads (Pure)

Evaluation of the in-plane shear strength of a combined retrofit system for masonry walls

Türkmen, Ö. S., De Vries, B. T., Wijte, S. N. M. & Vermeltfoort, A. T., Jul 2018, Tenth International Masonry Conference. p. 1953-1962 10 p. S12 426

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Large scale testing of digitally fabricated concrete (DFC) elements

Bos, F., Wolfs, R., Ahmed, Z. & Salet, T., 31 Aug 2018, First RILEM International Conference on Concrete and Digital Fabrication – Digital Concrete 2018. Wangler, T. & Flatt, R. J. (eds.). Berlin: Springer, p. 129-147 19 p. (RILEM Bookseries; vol. 19).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

6 Citations (Scopus)
1 Downloads (Pure)

Numerical soil model for analysing sewer pipe-soil interactions

Scheperboer, I. C., Suiker, A. S. J., Bosco, E. & Clemens, F. H. L. R., 23 Sep 2018, Proceedings of 11th International Conference on Urban Drainage Modelling. Mannina, G. (ed.). Palermo: Universita di Palermo, p. 889-893 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

4 Downloads (Pure)

Partial factors for fatigue loads in the Eurocode system for road bridge design

Hashemi, S. B., Maljaars, J. & Snijder, H. H., 15 Jun 2018, Safety and Reliability - Safe Societies in a Changing World: Proceedings of ESREL 2018. van Gulijk, C., Haugen, S., Barros, A., Vinnem, J. E. & Kongsvik, T. (eds.). 1st ed. London: Taylor and Francis Ltd., p. 2339-2345 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
109 Downloads (Pure)

Repair, strengthening and upgrading of steel bridges in The Netherlands

Snijder, H. H. & Hesselink, B. H., 2018, Engineering the Future : Proceedings of the 39th IABSE Symposium, 21-23 September 2017, Vancouver, Canada . s.l.: International Association for Bridge and Structural Engineering, p. 1177-1184 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
668 Downloads (Pure)

Representativeness of compressed flange behaviour for trapezoidal steel sheeting under combined web crippling and bending

Hofmeyer, H., Vervoort, E. M. C., Snijder, H. H. & Maljaars, J., 2018, Proceedings Eight International Conference on Thin-Walled Structures ICTWS 2018, July 24-27, 2018, Lisbon, Portugal. 20 p. 22

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
55 Downloads (Pure)

Resource-efficient structural design

Blok, R., Habraken, A. P. H. W., Pronk, A. D. C. & Teuffel, P. M., 2018, Proceedings of the IASS Symposium 2018: Creativity in Structural Design. Mueller, C. & Adriaenssens, S. (eds.). p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
162 Downloads (Pure)

Static-cyclic in-plane tests on clay brick masonry retrofitted with a single sided fabric-reinforced cementitious matrix layer, deep mounted CFRP strips and flexible anchor connection

Türkmen, Ö. S., De Vries, B. T., Wijte, S. N. M. & Vermeltfoort, A. T., Jul 2018, Tenth International Masonry Conference. p. 1668-1683 16 p. S09 647

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

1 Citation (Scopus)

The development of a methodology to understand climate-induced damage in decorated oak wood panels

Ekelund, S. E., Luimes, R. A., Gauvin, C. A. F., van Duin, P. H. J. C., Jorissen, A. J. M., Ankersmit, H. A., Suiker, A. S. J., Groves, R. M. & Schellen, H. L., 2018, ICOM-CC 18th Triennial Conference, Copenhagen, Denmark. p. 1-9 9 p. 1507

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2017

3D concrete printing – a structural engineering perspective

Salet, T. A. M., Bos, F. P., Wolfs, R. J. M. & Ahmed, Z. Y., 2017, High Tech Concrete: where technology and engineering meet: Proceedings of the 2017 fib Symposium, held in Maastricht, The Netherlands, June 12–14, 2017. Hordijk, D. A. & Luković, M. (eds.). Cham : Springer, p. xliii-lvii 15 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

8 Citations (Scopus)
23 Downloads (Pure)

3D printing concrete with reinforcement

Bos, F. P., Ahmed, Z. Y., Wolfs, R. J. M. & Salet, T. A. M., 2017, High Tech Concrete: where technology and engineering meet. Hordijk, D. A. & Luković, M. (eds.). Cham: Springer, p. 2484-2493 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

23 Citations (Scopus)
7 Downloads (Pure)

3D printing of ice

Pronk, A. D. C., Moonen, Y., AOb, C., Luo, P. & Wu, Y., 25 Sep 2017, Interfaces - Architecture. Engineering. Science : IASS Annual symposium 2017, 25-28 September 2017, Hamburg, Germany. Bogle, A. & Grohmann, M. (eds.). Hamburg: HafenCity University , p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

A micro-mechanical modelling study of drying restraint effects on the hygro-mechanics of paper sheets

Bosco, E., Peerlings, R. H. J. & Geers, M. G. D., Sep 2017, Advances in Pulp and Paper Research: Transactions of the 16th Fundamental Research Symposium, 3-8 September 2017, Oxford, United Kingdom. Batchelor, W. & Söderberg, D. (eds.). Bury: FRC - The Pulp & Paper Fundamental Research Society, p. 627-649

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
88 Downloads (Pure)

Analytical modelling of the out-of-plane behavior of CFRP and ductile adhesive reinforced clay brick masonry walls

Wijte, S. N. M., Türkmen, Ö. S., Vermeltfoort, A. T. & Martens, D. R. W., 4 Jun 2017, Proceedings 13th Canadian Masonry Symposium. 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
41 Downloads (Pure)

Approach to include load sequence effects in the design of an offshore wind turbine substructure

Dragt, R. C., Allaix, D., Maljaars, J., Tuitman, J. T., Salman, Y. & Otheguy, M. E., 2017, Proceedings of the 27th International Ocean and Polar Engineering Conference, ISOPE 2017. p. 312-319 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2 Citations (Scopus)
1 Downloads (Pure)