Research Output 1969 2019

2014

Experimental analysis of stability of aluminium beams in case of fire, experiments

Meulen, van der, O. R., Soetens, F. & Maljaars, J., 2014, In : Journal of Structural Fire Engineering. 5, 2, p. 161-174 14 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Fires
Aluminum
Electric heating
Experiments
Heating rate

Failure and fatigue life assessment of steel railway bridges with brittle material

Maljaars, J., 2014, 37th IABSE Symposium Madrid 2014, Engineering for Progress, Nature and People, 3-5 September 2014, Madrid, Spain. Zurich: IABSE International Association for Bridge and Structural Engineering, p. 435-442 (IABSE Reports; vol. 102)

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Steel bridges
Brittleness
Fatigue of materials
Toughness
Fracture mechanics
11 Citations (Scopus)

Fatigue failure analysis of stay cables with initial defects : Ewijk bridge case study

Maljaars, J. & Vrouwenvelder, A. C. W. M., 2014, In : Structural Safety. 51, p. 47-56 10 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Failure analysis
Cables
Fatigue of materials
Wire
Defects

From rapid prototyping to automated manufacturing

van der Zee, A., de Vries, B. & Salet, T. A. M., 2014, Proceedings of the 32nd eCAADe Conference, 10-12 September 2014, Newcastle upon Tyne, United Kingdom. Thompson, E. M. (ed.). Newcastle upon Tyne, England: Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, p. 445-461

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Rapid prototyping
Nozzles
Printing
Materials properties

Generation of structure concepts via 3D topology optimisation

Hofmeyer, H. & Davila Delgado, J. M., 2014, Proceedings of the 21st International Workshop: Intelligent Computing in Engineering (EG-ICE 2014), July 16-18, 2014 in Cardiff, The United Kingdom. Li, H., Rafiq, Y. & Wilde, de, P. (eds.). Cardiff, Wales, United Kingdom: Cardiff University School of Engineering, p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Shape optimization
Bending moments
Strain energy
68 Citations (Scopus)

Guidelines for the on-site assessment of historic timber structures

Cruz, H., Yeomans, D., Tsakanika, E., Macchioni, N., Jorissen, A. J. M., Touza, M., Mannucci, M. & Lourenco, P. B., 2014, In : International Journal of Architectural Heritage : Conservation, Analysis, and Restoration. 9, 3, p. 277-289 13 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Timber
Structural analysis
Conservation
Bearings (structural)
Loads (forces)

Harmonization of the safety level of design rules for steel structures : from ductile to brittle failure modes

Taras, A., Simoes da Silva, L., Marques, L., Kuhlmann, U. & Snijder, H. H., 2014, Eurosteel 2014 – 7th European Conference on Steel and Composite Structures, 10-12 September 2014, Naples, Italy. Landolfo, R. & Mazzolani, F. M. (eds.). Brussels: ECCS European Convention for Constructional Steelwork, p. 1037-1038

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File

Hybride wapening in woningcasco : iQwoning met combinatie van staalvezels en traditionele wapening berekend en beproefd

Kleinman, C. S. & Rensen, J. T. H., 2014, In : Cement. 66, 6, p. 96-101 6 p.

Research output: Contribution to journalArticleProfessional

Hygromechanical behavior of a wooden panel

Gauvin, C. A. F., Jullien, D. & Gril, J., 2014

Research output: Contribution to conferencePosterAcademic

Open Access
File

Hygromechanical behaviour of a free wooden panel: monitoring using image correlation techniques and continuous weighting

Gauvin, C. A. F., Jullien, D. & Gril, J., 2014, Doctiss 2014. Montpellier

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

Hygromechanical behaviour of a wooden panel: monitoring using image correlation techniques and continuous weighting

Gauvin, C. A. F., Jullien, D. & Gril, J., 2014, First Iranian International Training Seminar on Timber Engineering and Wood in Constructions, 13-14 May 2014, Karaj, Iran.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

Open Access
File
8 Citations (Scopus)

Image correlation to evaluate influence of hygrothermal loading on wood

Gauvin, C. A. F., Jullien, D., Doumalin, P., Dupré, J-C. & Gril, J., 2014, In : Strain. 50, 5, p. 428-435

Research output: Contribution to journalArticleAcademicpeer-review

15 Citations (Scopus)

Indicators for functional service life of building structures

Blok, R. & Teuffel, P., 2014, Proceedings of the International Conference Civil Engineering for Sustainability and Resilience Amman, 24-27 April 2014. p. 52

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Service life

Investigation of the net cross-section failure mechanism : experimental research

Rombouts, I. M. J., Francken, W. L., Dekker, R. W. A. & Snijder, H. H., 2014, Eurosteel 2014 – 7th European Conference on Steel and Composite Structures, 10-12 September 2014, Naples, Italy. Landolfo, R. & Mazzolani, F. M. (eds.). Brussels: ECCS European Convention for Constructional Steelwork, p. 267-268 and full 6 pages paper on USB-stick

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File

Kinegrity: the kinetic transformation of a tensegrity

Pronk, A. D. C., Buskes, H., Klerk, L. S. & Koelewijn, P., 15 Sep 2014, Proceedings of the IASS-SLTE 2014 Symposium “Shells, Membranes and Spatial Structures: Footprints”, 15-19 September 2014, Brasilia, Brazil. Brasil, R. M. L. R. F. & Pauletti, R. M. O. (eds.). International Association for Shell and Spatial Structures, 9 p. 264

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

1 Citation (Scopus)

Load-bearing glass columns: the stacked column

van Heugten, R. J. H., Teuffel, P., Lindner, G. & Nijsse, R., 2014, Proceedings of the Challenging Glass 4 & COST Action TU0905 final conference, 6-7 february 2014, Lausanne, Switzerland. Louter, C., Bos, F. & Lebet, J-P. (eds.). London: Taylor and Francis Ltd., p. 717-724

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Bearings (structural)
Glass
Compressive strength
Bearing capacity
Loads (forces)
2 Citations (Scopus)

Model for analyzing the mechanical behavior of articular cartilage under creep indentation test

Elhamian, S. M., Karimi, H., Alizadeh, M., Mehrdad Shokrieh, M. & Karimi, A., 14 Nov 2014, In : Journal of Applied Physics. 116, 18, p. 1-9 184702

Research output: Contribution to journalArticleProfessional

Open Access
File
cartilage
indentation
collagens
fibers
fiber orientation

Multifunctional building skin for ultra-low energy construction of residential properties and inside refurbishments of terraced houses

Moonen, S. P. G., 2014, Advanced Building Skins, Conference Proceedings of the 9th Energy Forum, 28-29 )ctober 2014, Bressanone, Italy. Munich: Economic Forum, p. 1295-1306

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Skin
Insulation
Bearing capacity
Loads (forces)
Chemical analysis
2 Citations (Scopus)

Numerical simulation of fatigue crack growth rate and crack retardation due to an overload using a cohesive zone model

Silitonga, S., Maljaars, J., Soetens, F. & Snijder, H. H., 2014, 11th International Fatigue Congress, 2-7 March 2014,. Clark, G. & Wang, C. H. (eds.). Switzerland: Trans Tech Publications, p. 777-783 (Advanced Materials Research; vol. 891-892)

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File

Onderzoeksmiddag Construeren met hout : 17 januari 2014

Jorissen, A. J. M. (ed.) & Leijten, A. J. M. (ed.), 2014, Eindhoven: Technische Universiteit Eindhoven. 110 p.

Research output: Book/ReportBook editingAcademic

Optimising building structural topologies

Davila Delgado, J. M. & Hofmeyer, H., 2014, OPT-i : International Conference on Engineering and Applied Sciences Optimization : Proceedings of the 1st International Conference on Engineering and Applied Sciences, held in Kos Island, Greece, 4- 6 June 2014. Karlaftis, M. G., Lagaros, N. D. & Papadrakakis, M. (eds.). Athens: Institute of Structural Analysis and Antiseismic Research, School of Civil Engineering, National Technical University of Athens (NTUA), p. 1965-1976

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Topology
Bearings (structural)
Structural optimization
Shape optimization
Brick
1 Citation (Scopus)

Optimization of aluminum stressed skin panels in offshore applications

Hove, van, B. W. E. M. & Soetens, F., 2014, In : Materials. 7, 9, p. 6811-6831

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Aluminum
Skin
Explosions
Extrusion
Heat affected zone

Preparing students towards the complexity of today's practice : start-up in a multidisciplinary assignment

Moonen, S. P. G. & Veeger, T. T., 2014, International conference unspoken issues in architectural education(UIAE'14), 3-4 April 2014, Gazimagusa(Famagusta), North Cyprus. Dincyürek, Ö., Hoskara, S. & Vural, S. M. (eds.). Gazimagusa, North Cyprus: Eastern Mediterranean University Press, p. 299-319

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Students
Studios
Physics
Structural design
Education
20 Citations (Scopus)

Probabilistic fatigue life updating accounting for inspections of multiple critical locations

Maljaars, J. & Vrouwenvelder, A. C. W. M., 2014, In : International Journal of Fatigue. 68, p. 24-37 14 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Fatigue Life
Updating
Inspection
Fatigue of materials
Fatigue

Rapidly building with lightweight modules and a dry assembled foundation : used in a mock-up for home units made out of reclaimed materials

Moonen, S. P. G., 2014, Proceedings of the 4th International Conference on Mobile, Adaptable and Rapidly Assembled Structures (MARAS 2014), 11-13 June 2014, Ostend Belgium. Temmerman, de, N. & Brebbia, C. A. (eds.). WIT Press, p. 209-222

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

demolition
insulation
student
material
industry
3 Citations (Scopus)

Risk evaluation in Dutch land-use planning

Xanten, van, N. H. W., Pietersen, C. M., Pasman, H. J., Torn, van der, P., Vrijling, H. K., Wal, van der, A. J. & Kerstens, J. G. M., 2014, In : Process Safety and Environmental Protection : Official Journal of the European Federation of Chemical Engineering: Part B. 92, 4, p. 368-376 9 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
land use planning
Land use
Planning
safety
Decision making
2 Citations (Scopus)

Root cause analysis of the fatigue failures of the pulsation dampers of a large underground gas storage (UGS) system

Eijk, A., Lange, de, D. & Maljaars, J., 2014, 9th Conference European Forum for Reciprocating Compressors (EFRC) September 11th / 12th, 2014, Vienna, Austria. Vienna, p. 1-11

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Safety and redundancy of adaptive building structures

Slotboom, M., Robbemont, A., Habraken, A. P. H. W. & Teuffel, P., 2014, Proceedings of the Civil Engineering for Sustainability and Resilience International Conference (CESARE ’14), 24-27 april 2014, Amman, Jordan. p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Redundancy
Risk analysis
Accidents
2 Citations (Scopus)

Sandwich panels with holes

Jorissen, A. J. M., Castelijns, L. J. J., Van Rie, J. L. G. & Hofmeyer, H., 2014, Proceedings of the World Conference on Timber (WCTE) 2014, 10-14 August 2014, Quebec, Canada. Salenikovich, A. (ed.). Quebec city: FPInnovations, p. 1-11

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Analytical models
Cracks
Computer simulation
Energy balance
Stress concentration

Simulation results of cracking in point loaded masonry compared with experimental results.

Vermeltfoort, A. T., 2014, Proceedings of the 9th International Masonry Conference, 7-9 July 2014, Guimarães, Portugal. Lourenco, P. B., Hasseltine, B. A. & Vasconselos, G. (eds.). Minho: University of Minho and ISISE and International Masonry Society (IMS), p. 1-12

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

8 Citations (Scopus)

Size effect model for the edge strength of glass with cut and ground edge finishing

Vandebroek, M., Louter, C., Caspeele, R., Ensslen, F. & Belis, J. L. I. F., 15 Nov 2014, In : Engineering Structures. 79, p. 96-105

Research output: Contribution to journalArticleAcademicpeer-review

Spliting of timber caused by multiple connections

Leijten, A. J. M. & Schoenmakers, J. C. M., 2014, Proceedings of the 18th International Conference on Advances and Trends in Engineering Materials and their Applications, AES-ATEMA 2014, 11-15 August 2014, Toronto, Canada. Haddad, Y. M. (ed.). Ottawa: Advanced Engineering Solutions, p. 33-39

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Timber
Fracture mechanics

Splitting of beams caused by multiple connections along the beam span

Leijten, A. J. M., 2014, Proceedings of the World Conference on Timber (WCTE) 2014, 10-14 August 2014, Quebec, Canada. Salenikovich, A. (ed.). Quebec city: FPInnovations, p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Experiments

Spraying pykrete: The spraying of water and wood fibers to reinforce ice

Pronk, A. D. C., Vasiliev, N., Janssen, F. H. M. E. & Houben, R. W. G., 15 Sep 2014, Proceedings of the IASS-SLTE 2014 Symposium “Shells, Membranes and Spatial Structures: Footprints”, September 15-19, 2014, Brasilia, Brazil. Basil, R. M. L. R. F. & Pauletti, R. M. O. (eds.). 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Spraying
Ice
Wood
Fibers
Snow
2 Citations (Scopus)

Structural performance and advantages of DVW reinforced moment transmitting timber joints with steel plate connectors and tube fasteners

Brandon, D. & Leijten, A. J. M., 2014, Materials and joints in timber structures : recent developments of technology. Aicher, S., Reinhardt, H-W. & Garrecht, H. (eds.). Stuttgart: Springer, p. 255-263 839 p. (RILEM Bookseries; vol. 9)

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Open Access
File
Connectors (structural)
Veneers
Fasteners
Timber
Wood

The calculation and construction of a 30 meter span ice dome

Pronk, A. D. C. & Borgart, A., 15 Sep 2014, Proceedings of the IASS-SLTE 2014 Symposium “Shells, Membranes and Spatial Structures: Footprints”, September 15-19, 2014, Brasilia, Brazil. Brasil, R. M. L. R. F. & Pauletti, R. M. O. (eds.). 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

The glass sphinx : theory to reality

Bos, F. P., Heijden, van der, T. & Geurts, R., Feb 2014, Proceedings of Challenging Glass 4 : Conference on Architectural and Structural Applications of Glass, 6-7 February 2014, Lausanne, Switzerland. Louter, C., Bos, F., Belis, J. & Lebet, J-P. (eds.). Boca Raton: CRC Press, p. 551-558

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

The influence of hardening conditions on the properties of masonry cement mortar prisms made in brick moulds

Bertram, G., 2014, Proceedings of the 9th International Masonry Conference, 7-9 July 2014, Guimarães, Portugal. Lourenco, P. B., Hasseltine, B. A. & Vasconseles, G. (eds.). Guimarães, Portugal: University of Minho and ISISE and International Masonry Society (IMS), p. 1-11

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Brick
Prisms
Mortar
Hardening
Cements

Thermal break with cellular glass units in load-earing asonry walls

Martens, D. R. W., 7 Jul 2014, p. 158 10 p.

Research output: Contribution to conferencePaperAcademic

3 Citations (Scopus)

Timber beams loaded perpendicular to grain by multiple connections

Leijten, A. J. M. & Schoenmakers, J. C. M., 2014, In : Engineering Structures. 80, p. 147-152 6 p.

Research output: Contribution to journalArticleAcademicpeer-review

Timber
Structural design
Crack propagation
Experiments
48 Citations (Scopus)

Traditional timber frames

Jorissen, A. J. M., den Hamer, J. & Leijten, A. J. M., 2014, Proceedings of the World Conference on Timber (WCTE) 2014, 10-14 August 2014, Quebec, Canada. Salenikovich, A. (ed.). Quebec City: FPInnovations, p. 1-9

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Timber
Stiffness

Transparent shell structure

Pronk, A. D. C., van Dooren, T. A. & Hermans, J. W., 15 Sep 2014, Proceedings of the IASS-SLTE 2014 Symposium “Shells, Membranes and Spatial Structures: Footprints”, 15-19 September 2014, Brasilia, Brazil. Brasil, R. M. L. R. F. & Pauletti, R. M. O. (eds.). p. 1-8 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Forms (concrete)
Textures
Concretes
Formability
Membranes

Wall tie research for existing and new structures; literature study

Kobesen, M. G., Vermeltfoort, A. T. & Mulders, S. G. C., 2014, Proceedings of the 9th International Masonry Conference, 7-9 July 2014, Guimarães, Portugal. Lourenço, P. B., Haseltine, B. A. & Vasconcelos, G. (eds.). Minho: University of Minho and ISISE and International Masonry Society (IMS), p. 1-12

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2013

A challenging practical experience, The Trek-in; a durable and innovative hikers’ cabin

Moonen, S. P. G. & Hermans, K., 2013, Proceedings of the Fifth International Symposium on Project Approaches in Engineering Education (PAEE’2013), 8-9 July, Eindhoven, The Netherlands. Hattum-Janssen, v., N., Lima, R. M., Carvalho, D., Fernandes, S., Sousa, R. M., Moreira, F., Alves, A. & Mesquita, D. (eds.). Eindhoven, p. ID42.1-ID42.8

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
experience
student
education
building
1 Citation (Scopus)

Adaptable lightweight structures to minimise material use

Habraken, A. P. H. W., Sleddens, W. & Teuffel, P., 2013, Proceedings of the 6th International Conference on Textile Composites and Inflatable Structures, Structural Membranes 2013, 9-11 October 2013, Munich, Germany. Bletzinger, K-U., Kröplin, B. & Oñate, E. (eds.). p. 1-12

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Actuators
Structural optimization
Explosions
Industry

Adaptive fluid lens and sunlight redirection system : exploring a novel way of redirecting and altering sunlight in large span roofs

Heinzelmann, F., Bristogianni, T. & Teuffel, P., 2013, Computation and Performance : Proceedings of the Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2013), 18-20 September 2013, Delft, The Netherlands. Stouffs, R. & Sariyildiz, S. (eds.). Delft: eCAADe, p. P31-1/10

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Roofs
Lenses
Fluids
Testing
13 Citations (Scopus)

Advances in moment transfering dvw reinforced timber connections : analysis and experimental verification, Part 1

Leijten, A. J. M. & Brandon, D., 2013, In : Construction and Building Materials. 43, p. 614-622 9 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Timber
Stiffness
Veneers
Fasteners
Steel

Advantages of DVW reinforced moment transmitting timber joints with steel flitch plates for colum-beam application

Leijten, A. J. M. & Brandon, D., 2013, Proceedings AES ATEMA '2013 14th International Conference Series, 5-9 August 2013, Toronto, Canada. Haddad, Y. M. (ed.). Ottawa, Canada: Advanced Engineering Solutions, p. 31-38

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Timber
Veneers
Stiffness
Steel
Wood
2 Citations (Scopus)

Analytical and finite element modelling of long plate mode jumping behaviour

Hofmeyer, H. & Courage, J., 2013, In : Thin-Walled Structures. 73, p. 101-111 11 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Buckling
Flanges
Boundary conditions
Bending moments
Potential energy