Research Output 1969 2019

2018
1 Citation (Scopus)

Static-cyclic in-plane tests on clay brick masonry retrofitted with a single sided fabric-reinforced cementitious matrix layer, deep mounted CFRP strips and flexible anchor connection

Türkmen, Ö. S., De Vries, B. T., Wijte, S. N. M. & Vermeltfoort, A. T., Jul 2018, Tenth International Masonry Conference. p. 1668-1683 16 p. S09 647

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Brick
Anchors
Carbon fibers
Reinforcement
Polymers

Stiffness plasticity degradation of masonry mortar under compression: preliminary results: Perda de rigidez da argamassa de assentamento da alvenaria comprimida: resultados preliminares

Mohamad, G., Fonseca, F. S., Vermeltfoort, A. T. & Lubeck, A., 1 Apr 2018, In : IBRACON Structures and Materials Journal. 11, 7, p. 279-295 17 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Mortar
Plasticity
Stiffness
Degradation
Poisson ratio

Study of self-healing properties in concrete with bacteria encapsulated in expanded clay

Lucas, S. S., Moxham, C., Tziviloglou, E. & Jonkers, H., 3 Dec 2018, In : Science and Technology of Materials. 30, suppl. 1, p. 93-98 6 p.

Research output: Contribution to journalArticleAcademicpeer-review

Bacteria
Clay
Concretes
Cracks
Service life

The development of a methodology to understand climate-induced damage in decorated oak wood panels

Ekelund, S. E., Luimes, R. A., Gauvin, C. A. F., van Duin, P. H. J. C., Jorissen, A. J. M., Ankersmit, H. A., Suiker, A. S. J., Groves, R. M. & Schellen, H. L., 2018, ICOM-CC 18th Triennial Conference, Copenhagen, Denmark. p. 1-9 9 p. 1507

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Museums
Wood
Conservation
Specifications
Testing
5 Citations (Scopus)

Toolbox for super-structured and super-structure free multi-disciplinary building spatial design optimisation

Boonstra, S., van der Blom, K., Hofmeyer, H., Emmerich, M. T. M., van Schijndel, A. W. M. & de Wilde, P., 20 Mar 2018, In : Advanced Engineering Informatics. 36, p. 86-100 15 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Demonstrations
Design optimization
Hot Temperature

Uncertainty analysis of constant amplitude fatigue test data employing the six parameters random fatigue limit model

Leonetti, D., Maljaars, J. & Snijder, H. H., 25 May 2018, In : MATEC Web of Conferences. 165, 8 p., 10016

Research output: Contribution to journalConference articleAcademicpeer-review

Open Access
File
Uncertainty analysis
Fatigue of materials
Steel
Uncertainty
Durability

Use of HSS and VHSS in steel structures in civil and offshore engineering

van Es, S., Slot, H., Steenbergen, H., Maljaars, J. & Pijpers, R., 12 Nov 2018, In : Steel Construction. 11, 4, p. 249-256 8 p.

Research output: Contribution to journalArticleAcademicpeer-review

Steel structures
High strength steel
Fracture toughness
Tensile strength
Fatigue of materials
2017

2D URANS simulation of aerodynamic loads on a pitching airfoil: Impact of computational parameters

Geng, F., Kalkman, I. M., Suiker, A. S. J. & Blocken, B. J. E., 2017

Research output: Contribution to conferenceAbstractAcademic

Aerodynamic loads
Airfoils
Computational fluid dynamics
Kinematics
Vortex flow
5 Citations (Scopus)

3D concrete printing – a structural engineering perspective

Salet, T. A. M., Bos, F. P., Wolfs, R. J. M. & Ahmed, Z. Y., 2017, High Tech Concrete: where technology and engineering meet: Proceedings of the 2017 fib Symposium, held in Maastricht, The Netherlands, June 12–14, 2017. Hordijk, D. A. & Luković, M. (eds.). Cham : Springer, p. xliii-lvii 15 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Structural design
Printing
Concretes
Geometry
Structural analysis
13 Citations (Scopus)

3D printing concrete with reinforcement

Bos, F. P., Ahmed, Z. Y., Wolfs, R. J. M. & Salet, T. A. M., 2017, High Tech Concrete: where technology and engineering meet. Hordijk, D. A. & Luković, M. (eds.). Cham: Springer, p. 2484-2493 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Printing
Reinforcement
Concretes
Cables
3D printers

3D printing of ice

Pronk, A. D. C., Moonen, Y., AOb, C., Luo, P. & Wu, Y., 25 Sep 2017, Interfaces - Architecture. Engineering. Science : IASS Annual symposium 2017, 25-28 September 2017, Hamburg, Germany. Bogle, A. & Grohmann, M. (eds.). Hamburg: HafenCity University , p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

8 Citations (Scopus)

A 2-dimension dynamic Bayesian network for large-scale degradation modelling with an application to a bridges network

Kosgodagan, A., Morales-Napoles, O., Yeung, T. G., Courage, W., Maljaars, J. & Castanier, B., 2017, In : Computer-Aided Civil and Infrastructure Engineering. 32, 8, p. 641-656 15 p.

Research output: Contribution to journalArticleAcademicpeer-review

Bayesian networks
Degradation
Steel bridges
Markov processes

A coupled gradient-based shape and topology optimization method

Wang, Z., Suiker, A. S. J., Hofmeyer, H., Kalkman, I. & Blocken, B. J. E., 23 Oct 2017

Research output: Contribution to conferencePosterAcademic

Open Access
File

A fatigue cohesive zone law for simulating interfacial delamination

Geng, F. & Suiker, A. S. J., 2017

Research output: Contribution to conferencePosterAcademic

Open Access
File

A micro-mechanical modelling study of drying restraint effects on the hygro-mechanics of paper sheets

Bosco, E., Peerlings, R. H. J. & Geers, M. G. D., Sep 2017, Advances in Pulp and Paper Research: Transactions of the 16th Fundamental Research Symposium, 3-8 September 2017, Oxford, United Kingdom. Batchelor, W. & Söderberg, D. (eds.). Bury: FRC - The Pulp & Paper Fundamental Research Society, p. 627-649

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Drying
Mechanics
Wetting
Fibers
Buckling

Analytical modelling of the out-of-plane behavior of CFRP and ductile adhesive reinforced clay brick masonry walls

Wijte, S. N. M., Türkmen, Ö. S., Vermeltfoort, A. T. & Martens, D. R. W., 4 Jun 2017, Proceedings 13th Canadian Masonry Symposium. 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Brick
Carbon fibers
Adhesives
Clay
Polymers
4 Citations (Scopus)

A new method for fatigue life prediction based on the Thick Level Set approach

Voormeeren, L. O., van der Meer, F. P., Maljaars, J. & Sluys, L. J., 1 Sep 2017, In : Engineering Fracture Mechanics. 182, p. 449-466 18 p.

Research output: Contribution to journalArticleAcademicpeer-review

Fatigue of materials
Steel
Strain energy
Fracture mechanics
Free energy
2 Citations (Scopus)

Approach to include load sequence effects in the design of an offshore wind turbine substructure

Dragt, R. C., Allaix, D., Maljaars, J., Tuitman, J. T., Salman, Y. & Otheguy, M. E., 2017, Proceedings 27th International Ocean and Polar Engineering Conference. p. 312-319 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Arching effect in laterally loaded urm walls

Martens, D. R. W. & Vermeltfoort, A. T., Jun 2017, Proceedings 13th Canadian Masonry Symposium. p. 1-12 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Bearing capacity
Compressive strength
Loads (forces)
Arches
Analytical models

Architectural Design learning by construction: review of Sino-Euro join studio of ice architecture construction

Luo, P., Yuan, L., Wang, K., Wu, Y. & Pronk, A. D. C., 25 Sep 2017, 2017 IASS Symposium, 25-28 September 2017, Hamburg, Germany.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

5 Citations (Scopus)

A real-time height measurement and feedback system for 3D concrete printing

Wolfs, R. J. M., Bos, F. P., van Strien, E. C. F. & Salet, T. A. M., 2017, High Tech Concrete: where technology and engineering meet: Proceedings of the 2017 fib Symposium, held in Maastricht, The Netherlands, June 12–14, 2017. Hordijk, D. A. & Luković, M. (eds.). Cham: Springer, p. 2474-2483

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Time measurement
Printing
Concretes
Feedback
3D printers
9 Citations (Scopus)

Assessment of hyperelastic material models for the application of adhesive point-fixings between glass and metal

Dispersyn, J., Hertelé, S., De Waele, W. & Belis, J., 1 Sep 2017, In : International Journal of Adhesion and Adhesives. 77, p. 102-117 16 p.

Research output: Contribution to journalArticleAcademicpeer-review

Adhesives
Metals
Glass
Experiments
Curve fitting
4 Citations (Scopus)

Asymptotic homogenization of hygro-thermo-mechanical properties of fibrous networks

Bosco, E., Peerlings, R. H. J. & Geers, M. G. D., Jun 2017, In : International Journal of Solids and Structures. 115–116, p. 180–189 10 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
homogenizing
Homogenization
Mechanical Properties
Fiber
mechanical properties

Automated two-way CFD fire-FEM thermo-mechanical coupling for global modelling of building structures under fire

Hofmeyer, H., Feenstra, J. A., van Herpen, R. A. P. & Mahendran, M., 2017, Proceedings Nafems World Congress 2017, A World of Engineering Simulation, June 11-14, 2017, Stockholm, Sweden. p. 1-17

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

B3 : Brücke aus bio-basiertem Verbundwerkstoff

Teuffel, P. M., 2017, Deutschen Bautechnik-Tag 2017, 27-28 April, Stuttgart, Germany. p. 1-2 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

Open Access
File
12 Citations (Scopus)

Behaviour of monolithic and laminated glass exposed to radiant heating

Debuyser, M., Sjöström, J., Lange, D., Honfi, D., Sonck, D. & Belis, J., 15 Jan 2017, In : Construction and Building Materials. 130, p. 212-229 18 p.

Research output: Contribution to journalArticleAcademicpeer-review

Radiant heating
Glass
Heat flux
Bearings (structural)
Fires

Bending-shear interaction of steel I-shaped cross-sections: statistical evaluation

Dekker, R. W. A., Snijder, H. H. & Maljaars, J., 2017, 8th European Conference on Steel and Composite Structures (EUROSTEEL 2017), September 13-15, 2017, Copenhagen, Denmark. p. 3699–3708 10 p. (CE/Papers; vol. 1, no. 2-3)

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Strain hardening
Steel
Yield stress
Numerical models
Statistical methods

Bio-Based Composite Bridge – Lessons Learned

Blok, R. & Teuffel, P. M., 2017, Proceedings of the IASS Annual Symposium 2017 “Interfaces: architecture . engineering . science”, September 25-28th 2017, Hamburg, Germany. Bögle, A. & Grohmann, M. (eds.). iass, p. 1-8 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Composite bridges
Composite materials
Footbridges
Hemp
Flax

Bio composietens case study: uitwerking bio-brug

Blok, R., Oct 2017, Bio-Composieten Ontwerpen met vezels en ‘bio’ polymeren : Case study Bio-Brug. Tazelaar, K. (ed.). Hogeschool InHolland, p. 108-116 8 p.

Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

Open Access
File
3 Citations (Scopus)

Combined super-structured and super-structure free optimisation of building spatial designs

Boonstra, S., van der Blom, K., Hofmeyer, H. & Emmerich, M. T. M. M., Jul 2017, Intelligent computing in engineering. EG-ICE International workshop. 24TH 2017. : EG-ICE 2017. Koch, C., Tizani, W. & Ninić, J. (eds.). Nottingham: University of Nottingham, p. 23-34 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Knowledge engineering
Design optimization

Compatibility of S-N and crack growth curves in the fatigue reliability assessment of a welded steel joint

Hashemi, S. B., Maljaars, J., Leonetti, D. & Snijder, H. H., 6 Sep 2017, Procedia Structural Integrity. Vol. 5, p. 959-966 8 p. (Procedia Structural Integrity).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Crack propagation
Fatigue of materials
Steel
Miners
Reliability analysis

Condition assessment of sewer pipes by means of finite element modelling

Scheperboer, I. C., Suiker, A. S. J. & Bosco, E., 24 Oct 2017

Research output: Contribution to conferencePosterAcademic

5 Citations (Scopus)

Configuring advanced evolutionary algorithms for multicriteria building spatial design optimisation

van der Blom, K., Boonstra, S., Hofmeyer, H., Bäck, T. & Emmerich, M. T. M., 5 Jul 2017, 2017 IEEE Congress on Evolutionary Computation (CEC) Proceedings, June 5-8, 2017, Donostia - San Sebastián, Spain. Institute of Electrical and Electronics Engineers, p. 1803-1810 8 p. 7969520

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Evolutionary algorithms
Tuning
Design optimization

Developments in matrials codes and applications of steel structures

Snijder, H. H., 2017, Stahlbau, Holzbau und Verbundbau – Festschrift zum 60. Geburtstag von Univ.-Prof. Dr.-Ing. Ulrike Kuhlmann. Stuttgart: Institut für Konstruktion und Entwurf, Universität Stuttgart, Wilhelm Ernst & Sohn, p. 164-175 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Steel structures
High strength steel

Dynamic control of adaptive structures

Rooyackers, F. A. M., Suiker, A. S. J. & Habraken, A. P. H. W., 23 Oct 2017 1 p.

Research output: Contribution to conferencePosterAcademic

Open Access
File

Enabling large design search spaces in building optimisation

Boonstra, S., van der Blom, K., Hofmeyer, H. & Emmerich, M. T. M., Oct 2017

Research output: Contribution to conferencePosterAcademic

Open Access
File
18 Citations (Scopus)

Experimental exploration of metal cable as reinforcement in 3D printed concrete

Bos, F. P., Ahmed, Z. Y., Jutinov, E. R. & Salet, T. A. M., 16 Nov 2017, In : Materials. 2017, 10, p. 1-22 1011134

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Reinforcement
Cables
Metals
Concretes
Printing
3 Citations (Scopus)

Experimental–numerical investigation on the seismic behaviour of moment-resisting timber frames with densified veneer woodreinforced timber joints and expanded tube fasteners

van Bakel, R. H. B., Rinaldi, G., Leijten, A. J. M. & Fragiacomo, M., 1 Jul 2017, In : Earthquake Engineering & Structural Dynamics. 46, 8, p. 1307-1324 18 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Veneers
Fasteners
Timber
timber
Numerical models

Experiments to determine the out-of-plane behavior of CFRP and ductile adhesive reinforced clay brick masonry walls

Türkmen, Ö. S., Wijte, S. N. M., Vermeltfoort, A. T. & Martens, D. R. W., 4 Jun 2017, Proceedings 13th Canadian Masonry Symposium. p. 1-11 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Brick
Carbon fibers
Adhesives
Clay
Polymers
2 Citations (Scopus)

Expert judgment in life-cycle degradation and maintenance modelling for steel bridges

Kosgodagan, A., Morales-Nápoles, O., Maljaars, J. & Courage, W. M. G., 2017, Life-Cycle of Engineering Systems: Emphasis on Sustainable Civil Infrastructure - 5th International Symposium on Life-Cycle Engineering, IALCCE 2016, 16-19 October 2016, Delft, The Netherlands. s.l.: CRC Press/Balkema, p. 2130-2137 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Steel bridges
Bayesian networks
Markov processes
Life cycle
Degradation

Extended design method for in-plane stability of haunched sway portal frames

van Hove, B. W. E. M., Snijder, H. H., Hofmeyer, H. & Altinga, N., 2017, 8th European Conference on Steel and Composite Structures (EUROSTEEL 2017), September 13-15, 2017, Copenhagen, Denmark. p. 1344-1352 (CE/Papers; vol. 1, no. 2-3)

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Stiffness
Buckling
Amplification
Geometry
Steel

Fatigue damage evaluation using S-N curves obtained by different data fitting methods

Leonetti, D., Hashemi, S. B., Allaix, D. & Maljaars, J., 2017, Engineering the Future : 39th IABSE Symposium, 19-23 September 2017, Vancouver, British Columbia. p. 2551-2558

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Fatigue damage
Fatigue of materials
Miners
Fracture mechanics
Maximum likelihood

Fatigue life estimation of metal structures based on damage modeling

Silitonga, S., 15 May 2017, Eindhoven: Technische Universiteit Eindhoven. 197 p.

Research output: ThesisPhd Thesis 1 (Research TU/e / Graduation TU/e)Academic

Open Access
File
8 Citations (Scopus)

Fitting fatigue test data with a novel S-N curve using frequentist and Bayesian inference

Leonetti, D., Maljaars, J. & Snijder, H. H., 2017, In : International Journal of Fatigue. 105, p. 128-143

Research output: Contribution to journalArticleAcademicpeer-review

S-N Curve
Bayesian inference
Fatigue Limit
Fatigue
Fatigue of materials

Form-finding and construction of ice composite shell structures

Wu, Y., Liu, X., Chen, B., Li, Q., Luo, P., Pronk, A. D. C. & Mergny, E., 25 Sep 2017, 2017 IASS Symposium, 25-28 September 2017, Hamburg, Germany.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Ice
Composite materials
Cellulose
Domes
Towers
2 Citations (Scopus)

Formulation and numerical implementation of micro-scale boundary conditions for particle aggregates

Liu, J., Bosco, E. & Suiker, A. S. J., 1 Nov 2017, In : Granular Matter. 19, 24 p., 72

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Boundary conditions
boundary conditions
formulations
Finite difference method
Macros
3 Citations (Scopus)

Fully bio-based-composite footbridge : strain monitoring during use phase

Blok, R. & Teuffel, P. M., 2017, Footbridge 2017, 6-8 September 2017, Berlin, Germany. Berlin, p. 1-8 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Footbridges
Monitoring
Composite materials
Optical sensors
Loads (forces)
7 Citations (Scopus)

Fully bio-based composite pedestrian bridge : design, production, and monitoring

Luyckx, G., Coene, K., Voet, E., Blok, R., Teuffel, P. M. & Wijen, H. L. M., Nov 2017, Proceedings Sampe Europe 2017. Diamond Bar: Society for the Advancement of Material and Process Engineering (SAMPE), p. 215-222 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Footbridges
Composite bridges
pedestrian
Laminates
sensor
8 Citations (Scopus)
Open Access
File
homogenizing
mechanical properties
Mechanical properties
fibers
Fibers
9 Citations (Scopus)

Magnetic orientation of steel fibres in self-compacting concrete beams : effect on failure behaviour

Wijffels, M. J. H., Wolfs, R. J. M., Suiker, A. S. J. & Salet, T. A. M., 13 Apr 2017, In : Cement & Concrete Composites. 80, p. 342-355

Research output: Contribution to journalArticleAcademicpeer-review

Self compacting concrete
Steel fibers
Fibers
Silicone Oils
Gravel