Research Output 1969 2019

2011

Der Traum Vom Baumhaus : Frei Otto`s Ökohausprojekt in Berlin

Lendt, B. J. & Lindner, G., 2011

Research output: Non-textual formDigital or Visual ProductsProfessional

Discrete Element Modelling of VACUUMATICS

Huijben, F. A. A., Herwijnen, van, F. & Nijsse, R., 2011, IABSE-IASS Symposium 2011 - Taller, Longer, Lighter. London: Hemming Group Ltd, p. 8-

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
prestressing
vacuum
atmospheric pressure
simulation
membranes

Dynamic Analysis of the Rotterdam Central Station Footbridge

Breman, C., Stuit, H. G. & Snijder, H. H., 2011, Proceedings of the 4th International Footbridge Conference, 6-8 July 2011, Wroclaw, Poland. Biliszczuk, J., Bien, J., Hawryszkow, P. & Kaminski, T. (eds.). Wroclaw: DWE (Dolnoslaskie Wydawnictwo Edukacyjne, p. 1075-1084

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
9 Citations (Scopus)

Embedment tests perpendicular to the grain – optical measurements of deformation fields

Schoenmakers, J. C. M. & Svensson, S., 2011, In : European Journal of Wood and Wood Products. 69, 1, p. 133-142

Research output: Contribution to journalArticleAcademicpeer-review

dowels
Timber
timber
Bearings (structural)
fasteners
11 Citations (Scopus)

Failure mechanisms of dowel-type fastener connections perpendicular to grain

Schoenmakers, J. C. M. & Jorissen, A. J. M., 2011, In : Engineering Structures. 33, 11, p. 3054-3063 9 p.

Research output: Contribution to journalArticleAcademicpeer-review

Fasteners
Ductility
Loads (forces)
Bearing capacity
Timber

Finite Element Modelling of Unreinforced and Post-tensioned Masonry Shear Wall Assemblies

Meer, van der, L. J., Martens, D. R. W. & Vermeltfoort, A. T., 2011, Proceedings of the 9th Australasian Masonry Conference, Queenstown, New Zealand, February 2011. Ingham, J., Dhanasekar, M. & Masia, M. (eds.). p. 135-144

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Shear walls
Flanges
Bearing capacity
Loads (forces)
Office buildings
17 Citations (Scopus)

Finite element simulations of residual stresses in roller bent wide flange sections

Spoorenberg, R. C., Snijder, H. H. & Hoenderkamp, J. C. D., 2011, In : Journal of Constructional Steel Research. 67, 1, p. 39-50 12 p.

Research output: Contribution to journalArticleAcademicpeer-review

Flanges
Residual stresses
Bending machines
Steel
Arches
69 Citations (Scopus)

General notes on ductility in timber structures

Jorissen, A. J. M. & Fragiacomo, M., 2011, In : Engineering Structures. 33, 11, p. 2987-2997 11 p.

Research output: Contribution to journalArticleAcademicpeer-review

Timber
Ductility
Plastics
Nonlinear analysis
Brittleness
32 Citations (Scopus)

Global satellite analysis of the relation between aerosols and short-lived trace gases

Veefkind, J. P., Boersma, K. F., Wang, J., Kurosu, T., Chance, K., Krotkov, N. A. & Levelt, P. F., 2011, In : Atmospheric Chemistry and Physics. 11, 3, p. 1255-1267 13 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
trace gas
aerosol
biomass burning
aerosol formation
combustion

Het splijtgedrag van hout loodrecht op de vezel belast door stiftvormige verbindingsmiddelen

Schoenmakers, D., Jorissen, A. J. M. & Leijten, A. J. M., 2011, In : De Houtconstructeur. 18, 44, p. 34-40 7 p.

Research output: Contribution to journalArticlePopular

Integrated approach towards sustainable constructions : summary report of the cooperation activities of COST Action C25 : volume 1

Bragança, L. (ed.), Koukkari, H. H. (ed.), Blok, R. (ed.), Gervasio, H. (ed.), Veljkovic, M. (ed.), Plewako, Z. (ed.) & Borg, R. P. (ed.), 2011, Malta: University of Malta. 570 p.

Research output: Book/ReportBook editingAcademic

integrated approach
life cycle
sustainability
engineering
co-operation

Krachtswerking : grondslagen voor het berekenen en toetsen van staalconstructies voor gebouwen volgens Eurocode 0,1 en 3

Snijder, H. H. & Steenbergen, H. M. G. M., 2011, Zoetermeer: Bouwen met staal. 284 p.

Research output: Book/ReportBookAcademic

Lateral Stiffness of Timber Frames with CLT Infill Panels

Leijten, A. J. M., Jorissen, A. J. M. & Hoenderkamp, J. C. D., 2011, AES-ATEMA’ 2011 Ninth International Conference. Haddad, Y. M. (ed.). Ottawa: Advanced Engineering Solutions, p. 39-47 (ASE Technical Reviews International Journal (Series))

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Timber
Stiffness
Steel
Fasteners
Concretes

Lightweight floor system for vibration comfort

Zegers, S. F. A. J. G., 2011, Eindhoven: Technische Universiteit Eindhoven. 220 p.

Research output: ThesisPhd Thesis 2 (Research NOT TU/e / Graduation TU/e)Academic

Open Access
File
Damping
Vibrations (mechanical)
Innovation
Industry
Environmental impact

Modeling and producing optimal open cell structures for architecture

Pronk, A. D. C., Dominicus, M. M. T. & ten Hoope, L. D., 2011, Proceedings of IASS 2011 , 20-23 September 2011, London. London: iass

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Modelling and producing optimal open cell structures for architecture

Dominicus, M. M. T., Khademagha, P. & Pronk, A. D. C., 2011, Proceedings of the IABSE-IASS Symposium, 20-23 september, 2011, London, UK. Zürich: IABSE

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Moment Capacity of Cold-Formed Steel Angles Supporting Masonry Veneer Walls

Martens, D. R. W. & Meer, van der, L. J., 2011, Proceedings of the Eleventh North American Masonry Conference, Minneapolis, June 2011. Schultz, A. E., Weeks, J. S., Bigelow, O. & Bean Popehn, J. (eds.). p. 1-12

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Veneers
Steel
Buckling
Steel structures
Experiments

Nondestructive evaluation techniques and acoustic emission for damage assessment of concrete bridge in marine environment

Suma, A. B., Ferraro, R. M., Metrovich, B., Matta, F. & Nanni, A., 2011, Recent Advances in Maintenance and Repair of Concrete Bridges. Kim, Y. L. (ed.). ACI, p. 109-128 SP277-08. (American Concrete Institute. SP; vol. 277)

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Concrete bridges
Acoustic emissions
Concretes
Carbon fibers
Laminates
2 Citations (Scopus)

Optimisation of pre/post-stressed embedment-type timber joint

Shiratori, T., Leijten, A. J. M. & Komatsu, K., 2011, In : Proceedings of the Institution of Civil Engineers - Structures and Buildings. 164, 2, p. 91-104 14 p.

Research output: Contribution to journalArticleAcademicpeer-review

Veneers
Timber
Wood
Bolts
Mechanical engineering
36 Citations (Scopus)

Oxide growth and damage evolution in thermal barrier coatings

Hille, T. S., Turteltaub, S. R. & Suiker, A. S. J., 2011, In : Engineering Fracture Mechanics. 78, 10, p. 2139-2152 14 p.

Research output: Contribution to journalArticleAcademicpeer-review

Thermal barrier coatings
Oxides
Thermal cycling
Cracks
Aluminum
1 Citation (Scopus)

Parametric study of multiphase TRIP steels undergoing cyclic loading

Tjahjanto, D. D., Suiker, A. S. J., Turteltaub, S. R. & Zwaag, van der, S., 2011, In : Computational Materials Science. 50, 4, p. 1490-1498 9 p.

Research output: Contribution to journalArticleAcademicpeer-review

Cyclic Loading
Steel
Elastoplasticity
plastic properties
steels

Preliminary design of high-rise shear wall with outriggers and basement fin walls on non-rigid foundation

Hoenderkamp, J. C. D., 2011, Proceedings of the 36th International Conference on Our World in Concrete & Structures, 14-16 August 2011, Singapore. Singapore, p. 249-258

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Shear walls
Stiffness
Bending (deformation)
Bending moments
6 Citations (Scopus)

Pre-processing parallel and orthogonally positioned structural design elements to be used within the finite element method

Hofmeyer, H., Roosmalen, van, M. & Gelbal, F., 2011, In : Advanced Engineering Informatics. 25, 2, p. 245-258 14 p.

Research output: Contribution to journalArticleAcademicpeer-review

Structural design
Pattern recognition
Finite element method
Processing
13 Citations (Scopus)

Proposed residual stress model for roller bent wide flange sections

Spoorenberg, R. C., Snijder, H. H. & Hoenderkamp, J. C. D., 2011, In : Journal of Constructional Steel Research. 67, 6, p. 992-1000 9 p.

Research output: Contribution to journalArticleAcademicpeer-review

Flanges
Residual stresses
Steel
Buckling
Hot rolling
9 Citations (Scopus)

Requirements for moment connections in statically indeterminate timber structures

Leijten, A. J. M., 2011, In : Engineering Structures. 33, 2011, p. 3027-3032 6 p.

Research output: Contribution to journalArticleProfessional

Timber
Fasteners
Reinforcement
Stiffness
Ductility

Seismic properties of moment-resisting timber joints with a combination of bolts and nails

Awaludin, A., Hayashikawa, T., Oikawa, A., Hirai, T., Sasaki, Y. & Leijten, A. J. M., 2011, In : Civil Engineering Dimension. 13, 1, p. 1-5 5 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Nails
Timber
Bolts
Damping
Gluing

Shear walls in terraced houses, activating masonry by using reinforcement

Vermeltfoort, A. T., 2011, 11th North American Masonry Conference, Minneapolis, MN (USA), June 2011. Minneapolis: University of Minnesota, p. 1-12

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Shear walls
Piers
Reinforcement
Bearings (structural)
Experiments

Spline Technology as an Inspiration for the Shaping Process of VACUUMATICS Formwork

Huijben, F. A. A., Herwijnen, van, F. & Nijsse, R., 2011, IASS Structural Morphology Group International Seminar, September 2011. London, p. 5-

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
flexibility

Steel Frames with Discretely Connected Precast Concrete Infill Panels

Snijder, H. H., Hofmeyer, H. & Hoenderkamp, J. C. D., 2011, IABSE-IASS 2011 London Symposium Report Compact Disc (CD-ROM). London: International Association for Bridge and Structural Engineering IABSE, International Association for Shell and Spatial Structures IASS, Hemming Group Ltd, p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Precast concrete
Steel
Analytical models
Stiffness
Concretes

Stijfheideisen voor momentverbindingen in statisch onbepaalde houtconstructies m.b.v. de "Beam-line" methode

Leijten, A. J. M., 2011, In : De Houtconstructeur. 18, 44, p. 44-50 7 p.

Research output: Contribution to journalArticleProfessional

Strength properties of pinned connections in aluminium truss girders

Hove, van, B. W. E. M. & Soetens, F., 2011, Structural Engineers World Congress 2011 Abstract Book. Riccardo De Col, X., Gian Carlo Giuliani, X., Fabio Capsiono, X. & Enzo Siviero, X. (eds.). Italy: L.E.G.O. spa, p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Aluminum beams and girders
Stiffness
Load limits
Elongation
Bearings (structural)

Structural Dynamic Facade

Habraken, A. P. H. W., 2011, Proceedings of the International Conference on Textile Composites and Inflatable Structures (Structural Membranes 2011), 5-7 October 2011, Barcelona, Spain,. Onate, E., Kroplin, B. & Blezinger, K. (eds.). Barcelona: International Center for Numerical Methods in Engineering (CIMNE)

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File

Structural properties and out-of-plane stability of roller bent steel arches

Spoorenberg, R. C., 2011, Eindhoven: Technische Universiteit Eindhoven. 169 p.

Research output: ThesisPhd Thesis 1 (Research TU/e / Graduation TU/e)Academic

Open Access
File
Arches
Structural properties
Steel
Buckling
Residual stresses

Sustainability of constructions : towards a better built environment : proceedings of the Final Conference of COST Action C25

Bragança, L. (ed.), Koukkari, H. H. (ed.), Blok, R. (ed.), Gervasio, H. (ed.), Veljkovic, M. (ed.), Borg, R. P. (ed.), Landolfo, R. (ed.), Ungureanu, V. (ed.) & Schaur, C. (ed.), 2011, Malta: University of Malta. 580 p.

Research output: Book/ReportBook editingAcademic

Sustainable development
Structural design
Life cycle

The effect of cavity flow on pressure equalization

Suma, A. B., Bentum, van, C. A., Koster, T. & Geurts, C. P. W., 2011, 13th International Conference on Wind Engineering. Geurts et.al., X. (ed.). Amsterdam

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

The influence of single shear walls on the behaviour of coupled shear walls in high-rise structures

Hoenderkamp, J. C. D., 2011, The Twelfth East Asia-Pacific Conference on Structural Engineering and Construction. Tam, CM., Lam, HF., Kitipornchai, S. & Lo, YT. (eds.). Hong Kong: City University of Hong Kong

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

shear
bending moments
indication

The problem of a failure criterion for glass-metal adhesive bonds

Callewaert, D. D., Hulle, van, A. A., Belis, J. L. I. F., Bos, F. P., Dispersyn, J. & Out, B., Jun 2011, Proceedings of Glass Performance Days 2011. p. 654-657 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

Open Access
File
2010

Acetylated wood in structural applications

Bongers, F., Alexander, J., Jorissen, A. J. M., Blass, H. J. & Hill, C., 2010, Proceedings of the 5th European Conference on Wood Modification (ECWM), Riga, September 2010. Riga, p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Wood
Timber
Bearings (structural)
Concretes
Fabrication
15 Citations (Scopus)

Aluminium structures exposed to fire conditions - an overview

Maljaars, J., Twilt, L., Fellinger, J. H. H., Snijder, H. H. & Soetens, F., 2010, In : Heron. 55, 2, p. 85-116 32 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Aluminum
Safety engineering
Fires
Buckling
Aluminum alloys
8 Citations (Scopus)

Aluminium Structures in Building and Civil Engineering Applications

Soetens, F., 2010, In : Structural Engineering International. 20, 4, p. 430-435 6 p.

Research output: Contribution to journalArticleAcademicpeer-review

Civil engineering
Aluminum
Optimum design

Bearing capacity of bolt washers

Leijten, A. J. M. & Jorissen, A. J. M., 2010, Proceedings of the World Conference on Timber Engineering, Trento, June 2010. Ceccotti, A. & Van de Kuilen, J-W. (eds.). Trento: CNR-IVALSA, p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Washers
Timber
Bolts
Bearing capacity
Analytical models

Blast resistance behaviour of steel frame structrures

Mediavilla Varas, J. & Soetens, F., 2010, 34th International Symposium on Bridge and Structural Engineering, September 2010, Venice, Italy. Zürich: IABSE, p. 226-236 (IABSE Reports)

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Blast resistance
Facades
Steel
Explosions
Computer simulation

Calculation with a spread sheet of wind load distribution over shear walls

Vermeltfoort, A. T., 2010, Proceedings of the 8th International Masonry Conference, Dresden, July 2010. Dresden, p. 1027-1035

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Shear walls
Spreadsheets
Stiffness matrix
Loads (forces)

Case Study Virtual Office building

Blok, R., 2010, Proceedings of the Sustainability of Constructions, Integrated Approach to Life-time Structural Engineering Conference (COST-C25). Braganca e.o., L. (ed.). Orizonturi Universitare Publishing House, p. 354-362

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Collapse mechanisms of aluminium structures in fire : the direct strength method

Meulen, van der, O. R., 2010, Eindhoven: Eindhoven University of Technology. 61 p.

Research output: Book/ReportReportAcademic

Open Access
File
aluminum
method
state of the art

Composite action in CASIEL TLM walls, a literature review and experimental results

Vermeltfoort, A. T., 2010, 8th International Masonry Conference, Dresden, July 2010. Dresden, p. 149-160

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Calcium silicate
Composite materials
Loads (forces)
Railroad cars
Stiffness

Concrete Recycling in Life Cycle assessment

Blok, R., Marinkovic, S., Silva, L. & Gervasio, H., 2010, Proceedings of the Sustainability of structions, integrated approach to life-time structural engineering Conference (COST-C25). Braganca, L. (ed.). Orizonturi Universitare Publishing House, p. 323-332

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

4 Citations (Scopus)

Cross-sectional classification of aluminium beams subjected to fire

Meulen, van der, O. R., Maljaars, J. & Soetens, F., 2010, In : Heron. 55, 3, p. 1-17 17 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Aluminum
Fires
Patents and inventions
Insulation
Aluminum alloys
4 Citations (Scopus)

Cross-sectional classification of aluminium beams subjected to fire

Meulen, van der, O. R., Maljaars, J. & Soetens, F., 2010, New frontiers in light metals : 11th international aluminium conference, INALCO'2010, June 23-25, 2010, Eindhoven, Netherlands. Katgerman, L. & Soetens, F. (eds.). IOS Press, p. 397-409

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Fires
Aluminum
Aluminum alloys
Temperature

De nieuwe constructeur (1)

Kleinman, C. S., 2010, In : Cement. 62, 4, p. 78-79 2 p.

Research output: Contribution to journalArticleAcademicpeer-review