Research Output 1969 2019

2019
1 Citation (Scopus)

A cohesive XFEM model for simulating fatigue crack growth under mixed-mode loading and overloading

Dekker, R., van der Meer, F. P., Maljaars, J. & Sluys, L. J., 8 Jun 2019, In : International Journal for Numerical Methods in Engineering. 118, 10, p. 561-577 17 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Fatigue Crack Growth
Mixed Mode
Fatigue crack propagation
Adaptive Meshing
Cohesive Zone Model

A computational model for chemo-mechanical degradation of historical oil paintings due to metal soap formation

Eumelen, G., Bosco, E., Suiker, A. S. J., van Loon, A. & Iedema, P., 1 Nov 2019, In : Journal of the Mechanics and Physics of Solids. 132, 21 p., 103683

Research output: Contribution to journalArticleAcademicpeer-review

soaps
Soaps (detergents)
Painting
paints
oils

Added value of regular in-service visual inspection to the fatigue reliability of structural details in steel bridges

Hashemi, S., Maljaars, J. & Snijder, B., 2019, 5th International Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures – SMAR 2019: Proceedings.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Steel bridges
Inspection
Fatigue of materials
Crack detection
Steel structures

Analysing optimisation data for multicriteria building spatial design

van der Blom, K., Boonstra, S., Hofmeyer, H. & Emmerich, M. T. M., 2019, Evolutionary Multi-Criterion Optimization, 10th International Conference, EMO 2019, East Lansing, MI, USA, March 10-13, 2019, Proceedings. Deb, K., Goodman, E., Coello, C. A., Klamroth, K., Miettinen, K., Mostaghim, S. & Reed, P. (eds.). Springer, p. 671-682 12 p. (Lecture Notes in Computer Science ; vol. 11411)

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Mechanical engineering
Multiobjective optimization
Data mining
Engineers
Hot Temperature
8 Citations (Scopus)

An approach to develop printable strain hardening cementitious composites

Chaves Figueiredo, S., Romero Rodríguez, C., Ahmed, Z., Bos, D. H., Xu, Y., Salet, T., Çopuroglu, O., Schlangen, E. & Bos, F., 14 Mar 2019, In : Materials & Design. 2019, 169, 17 p., 107651

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Strain hardening
Rheology
Yield stress
Composite materials
Printing

An interface damage model for high-cycle fatigue

Geng, F. & Suiker, A. S. J., 25 Sep 2019, In : Engineering Fracture Mechanics. 106644

Research output: Contribution to journalArticleAcademicpeer-review

Fatigue of materials
Crack initiation
Plasticity
Crack propagation
Fibers

Bending moment - shear force interaction of rolled I-shaped steel sections

Dekker, R. W. A., 9 Jan 2019, Eindhoven: Technische Universiteit Eindhoven. 249 p.

Research output: ThesisPhd Thesis 1 (Research TU/e / Graduation TU/e)Academic

Bio-based composite footbridge: design, production and in situ monitoring

Blok, R., Smits, J., Gkaidatzis, R. & Teuffel, P., 11 Jun 2019, In : Structural Engineering International. 29, 3, p. 453-465

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Footbridges
Natural fibers
Monitoring
Composite materials
Polymers

Boundary conditions effects on the crack growth mechanism under cycling bending

Pucillo, G. P., Leonetti, D. & Esposito, L., 2019, Proceedings of the 2019 Joint Rail Conference, JRC2019. American Society of Mechanical Engineers, 6 p. JRC2019-1274

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Crack propagation
Boundary conditions
Cracks
Stress intensity factors
Aspect ratio
Roofs
Composite materials

Climate-induced damage in oak museum objects

Luimes, R. A., 17 Sep 2019, Eindhoven: Technische Universiteit Eindhoven. 131 p.

Research output: ThesisPhd Thesis 1 (Research TU/e / Graduation TU/e)Academic

Open Access
File
Oak
Art Objects
Climate
Damage

Co-evolutionary design processes applied to building spatial design optimization

Boonstra, S., van der Blom, K., Hofmeyer, H. & Emmerich, M. T. M., 31 May 2019, Proceedings of the World Congress of Structural and Multidisciplinary Optimization. 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Evolutionary algorithms
Design optimization

Constructiesystemen voor hallen

Snijder, H. H., 2019, Hallen: kenmerken en constructiesystemen van stalen hallen en het ontwerp van een éénbeukige geschoorde hal volgens Eurocode 3. van Eldik, C. H. (ed.). Zoetermeer: Bouwen met staal, 28 p.

Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

Demolition versus transformation, "mortality of building structures" depending on their technical building properties

Blok, R. & Teuffel, P. M., 25 Feb 2019, In : IOP Conference Series: Earth and Environmental Science. 225, 1, 8 p., 012016

Research output: Contribution to journalConference articleAcademicpeer-review

Open Access
File
demolition
mortality
parameter
services
material

Design, construction and monitoring of an ice composite shell structure

Wu, Y., Liu, X., Chen, B., Li, Q., Luo, P. & Pronk, A., 1 Oct 2019, In : Automation in Construction. 106, 13 p., 102862

Research output: Contribution to journalArticleAcademicpeer-review

Shells (structures)
Ice
Monitoring
Composite materials
Masonry construction
2 Citations (Scopus)

Digital concrete: a review

Wangler, T., Roussel, N., Bos, F., Salet, T. & Flatt, R., 13 Jun 2019, In : Cement and Concrete Research. 123, 17 p., 105780

Research output: Contribution to journalArticleAcademicpeer-review

Concretes
Fabrication
Rheology
Hydration
Printing
3 Citations (Scopus)

Ductility of 3D printed concrete reinforced with short straight steel fibers

Bos, F. P., Bosco, E. & Salet, T. A. M., 2019, In : Virtual and Physical Prototyping. 14, 2, p. 160-174 15 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Ductility
Steel fibers
Reinforced Concrete
Straight
Reinforced concrete

Editorial special issue: advanced manufacturing and materials for inovative structural design

Orr, J., Pronk, A. & Ibell, T., 1 Apr 2019, In : Structures. 18, 1 p.

Research output: Contribution to journalEditorialAcademicpeer-review

Structural design
1 Citation (Scopus)

Effects of 3D zoning of spatial designs on the performance of structure systems

Hofmeyer, H., Claessens, D. P. H., Boonstra, S. & de Vries, B., 2019, Intelligent and Informed - Proceedings of the 24th International Conference on Computer-Aided Architectural Design Research in Asia, CAADRIA 2019. Schnabel, M. A., Fukuda, T. & Haeusler, M. H. (eds.). Hong Kong: The Association for Computer-Aided Architectural Design Research in Asia (CAADRIA), Vol. 1, p. 205-214 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Zoning

Environmental optimization of precast concrete beams using fibre reinforced polymers

van Loon, R. R. L., Pujadas, E., Moonen, F. & Blok, R., 5 Apr 2019, In : Sustainability. 11, su11072174, p. 1-12 2174

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Precast concrete
polymer
Fibers
Polymers
Reinforced concrete
1 Citation (Scopus)

Evaluating memetic building spatial design optimisation using hypervolume indicator gradient ascent

van der Blom, K., Boonstra, S., Wang, H., Hofmeyer, H. & Emmerich, M. T. M., 2019, Numerical and Evolutionary Optimization – NEO 2017. Trujillo, L., Schütze, O., Maldonado, Y. & Valle, P. (eds.). Cham: Springer, p. 62-82 (Studies in Computational Intelligence; vol. 785)

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

Gradient methods
Multiobjective optimization
Design optimization

Evaluation of clamping force in hot-driven rivets of the Botlekbrug

Leonetti, D., Maljaars, J. & Snijder, B., 2019, Proceedings of the Belgian-Dutch IABSE Young Engineers Colloquium 2019, YEC 2019. De Pauw, B., Leonetti, D., Snijder, H. H. & De Pauw, B. (eds.). Belgian and Dutch National Groups of IABSE, p. 76-77 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Rivets
Fatigue of materials
Bolted joints
Steel structures
Stress concentration

Evaluation of latent heat storage in mortars containing microencapsulated paraffin waxes – a selection of optimal composition and binders

Lucas, S. S. & Barroso de Aguiar, J. L., Sep 2019, In : Heat and Mass Transfer. 55, 9, p. 2429-2435

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Paraffin waxes
heat storage
Heat storage
phase change materials
waxes
Open Access
File
Concretes

Fatigue life prediction of hot riveted double covered butt joints

Maljaars, J., Leonetti, D. & Maas, C., 1 Jul 2019, In : International Journal of Fatigue. 124, p. 99-112 14 p.

Research output: Contribution to journalArticleAcademicpeer-review

Fatigue Life Prediction
Fatigue Strength
Fatigue of materials
Rivets
Steel
1 Citation (Scopus)

Fatigue life prediction of hot-riveted shear connections using system reliability

Leonetti, D., Maljaars, J. & Snijder, H. H., 2019, In : Engineering Structures. 186, p. 471-483 13 p.

Research output: Contribution to journalArticleAcademicpeer-review

Fatigue of materials
Rivets
Riveting
Structural members
Steel structures

Fluid architecture and flexible moulding

Pronk, A. D. C., 27 Feb 2019, Eindhoven: Technische Universiteit Eindhoven. 600 p.

Research output: ThesisPhd Thesis 1 (Research TU/e / Graduation TU/e)Academic

GEM tower: English

Pujadas, E., van Schie, F., Lenaers, P., Lazauskas, M., Ungurys, S. & Moonen, F., 1 Jun 2019, 1 p.

Research output: Other contributionPopular

Open Access
File
Towers
Solar collectors
Waste disposal
Sun
Architectural design

Glass is all around us!

Nielsen, J. H., Belis, J., Louter, C., Overend, M. & Schneider, J., 15 Jan 2019, In : Glass Structures & Engineering. 4, 1, p. 1-2 2 p.

Research output: Contribution to journalEditorialAcademicpeer-review

Open Access
4 Citations (Scopus)

Hardened properties of 3D printed concrete: the influence of process parameters on interlayer adhesion

Wolfs, R. J. M., Bos, F. P. & Salet, T. A. M., 2019, In : Cement and Concrete Research. 199, p. 132-140

Research output: Contribution to journalArticleAcademicpeer-review

Adhesion
Concretes
Printing
Nozzles
3D printers
1 Citation (Scopus)
Open Access
masonry
bricks
Brick
carbon fibers
clays

Masonry mechanical properties

Ghiassi, B., Vermeltfoort, A. T. & Lourenco, P. B., 2019, Numerical Modeling of Masonry and Historical Structures. Ghiassi, B. & Milani, G. (eds.). Elsevier, Woodhead publishing, p. 239-261

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

Mechanical properties of materials used for masonry

Ghiassi, B., Vermeltfoort, A. T. & Lourenço, P. B., 2019, (In preparation) Numerical Modeling of Masonry and Historical Structures. Ghiassi, B. & Milani, G. (eds.). 1st ed. Elsevier, Woodhead publishing, (Woodhead Publishing Series in Civil and Structural Engineering)

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

Mechanical properties
Computer simulation
1 Citation (Scopus)

Multi-scale modelling of granular materials: numerical framework and study on micro-structural features

Liu, J., Bosco, E. & Suiker, A. S. J., 1 Feb 2019, In : Computational Mechanics. 63, 2, p. 409–427 19 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Multiscale Modeling
Granular Materials
Granular materials
Macros
Anisotropy

On the effects of unilateral boundary conditions on the crack growth rate under cycling bending loads

Pucillo, G. P., Esposito, L. & Leonetti, D., 1 Jul 2019, In : International Journal of Fatigue. 124, p. 245-252 8 p.

Research output: Contribution to journalArticleAcademicpeer-review

Crack Growth Rate
Notch
Cycling
Crack propagation
Boundary conditions

Probabilistic approach to evaluate fatigue safety status in steel railway bridges

Hashemi, B., Maljaars, J. & Snijder, B., 2019, Proceedings of the Belgian-Dutch IABSE Young Engineers Colloquium 2019, YEC 2019. De Pauw, B., Leonetti, D., Snijder, H. H. & De Pauw, B. (eds.). Belgian and Dutch National Groups of IABSE, p. 36-37 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Steel bridges
Sensitivity analysis
Fatigue of materials
Steel

Proceedings of the Belgian-Dutch IABSE Young Engineers Colloquium 2019: YEC2019

Snijder, H. H. (ed.), De Pauw, B. (ed.) & Leonetti, D. (ed.), 15 Mar 2019, Eindhoven: Technische Universiteit Eindhoven. 106 p.

Research output: Book/ReportBook editingAcademicpeer-review

Open Access
File

Punching shear failure of welded rectangular hollow section joints in aluminium

Manders, W. W. J., Maljaars, J., Belin, B. & Lukić, M., 4 Jul 2019, In : Construction Métallique. 2019, 2, p. 119-142 22 p.

Research output: Contribution to journalArticleAcademicpeer-review

Punching
Aluminum
Steel structures
Failure modes
Welds

Rainwater ponding on roof structures with interaction between main girders and purlins

Snijder, B. & Wijte, S., 2019, 20th Congress of IABSE New York City 2019: The Evolving Metropolis - Report. Zurich: International Association for Bridge and Structural Engineering, p. 150-157 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Ponding
Beams and girders
Roofs
Rain
Climate change

Realistic structural stabilization based on spatial zoning

Boonstra, S., Claessens, D. P. H., Hofmeyer, H. & de Vries, B., 3 Jul 2019, 26th International Workshop on Intelligent Computing in Engineering. Geyer, P., Allacker, K., Schevenels, M., de Troyer, F. & Pauwels, P. (eds.). Leuven: Katholieke Universiteit Leuven, 10 p. 15. (CEUR Workshop Proceedings; vol. 2394)

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
Zoning
Stabilization
Structural design
Model structures
Kinematics

Recent advances on yield stress and elasticity of fresh cement-based materials

Roussel, N., Bessaies-Bey, H., Kawashima, S., Marchon, D., Vasilic, K. & Wolfs, R. J. M., 1 Oct 2019, In : Cement and Concrete Research. 124, 11 p., 105798

Research output: Contribution to journalReview articleAcademicpeer-review

Yield stress
Elasticity
Cements
Processing
Mechanical properties

Rekenregels beoordeling bestaande breedplaatvloeren: Resultaten onderzoek constructieve veiligheid in bestaande utiliteitsgebouwen

Wijte, S. & Dieteren, G. G. A., 1 Jun 2019, In : Cement. 2019, 4, p. 30-39 10 p.

Research output: Contribution to journalArticleProfessional

Open Access
File

Research by design: interdisciplinary explorations within architectural design, structural design and material lab to develop innovative bio-based material pavilions

Schröder, T., Kuit, B., Blok, R. & Teuffel, P., Apr 2019, Materiality as a process. Couceiro da Costa, M., Formiga, B. & Merin Abbas, G. (eds.). Lisbon: Caleidoscopio, p. 163-175

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

Architectural design
Structural design
Materials properties
Composite materials
Mockups

Revision of EN 1993-1-11 – fatigue design rules for tension components

Annan, R., Bechtold, M., Friedrich, H., Maljaars, J., Misiek, T. & Paschen, M., 21 Jun 2019, In : Steel Construction : Design and Research. 12, 15 p.

Research output: Contribution to journalArticleAcademicpeer-review

Fatigue of materials
Plastics
Defects
Brittle fracture
Fracture mechanics
Ligaments

Stabiliteit van hallen

Snijder, H. H., 2019, Hallen: kenmerken en constructiesystemen van stalen hallen en het ontwerp van een éénbeukige geschoorde hal volgens Eurocode 3. van Eldik, C. H. (ed.). Zoetermeer: Bouwen met staal, 20 p.

Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

Stability interaction effects in 3D steel frames: a case study

Snijder, B., Titulaer, L. H. J. D., Teeuwen, P. A. & Hofmeyer, H., 2019, Proceedings of the International Colloquia on Stability and Ductility of Steel Structures (SDSS 2019), September 11-13, 2019, Prague, Czech Republic. Wald, F. & Jandera, M. (eds.). Boca Raton: CRC Press Taylor & Francis Group, p. 1025-1033 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Finite element method
Steel
Stiffness
Computer simulation
Experiments

Structural adaptation through stiffness tuning

Hidding, A., Bier, H., Wang, Q., Teuffel, P. & Senatore, G., 1 Jan 2019, In : Spool. 6, 1, p. 43-48 6 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
stiffness
Tuning
Stiffness
robotics
layout

Structural failure during extrusion-based 3D printing processes

Wolfs, R. J. M. & Suiker, A. S. J., Sep 2019, In : International Journal of Advanced Manufacturing Technology. 104, 1-4, p. 565-584

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Extrusion
Printing
Curing
Buckling
Finite element method