Research Output

2014

Bending-shear interaction of I-shaped cross-sections : preliminary experimental research to verify the EC3 design rule

Snijder, H. H., Dekker, R. W. A. & Saric, I., 2014, Eurosteel 2014 – 7th European Conference on Steel and Composite Structures, 10-12 September 2014, naples, Italy. Landolfo, R. & Mazzolani, F. M. (eds.). Brussels: ECCS European Convention for Constructional Steelwork, p. 1039-1040 and full 6 pages paper on USB-stick

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
32 Downloads (Pure)

Buckling curves for heavy wide flange QST columns based on statistical evaluation

Spoorenberg, R. C., Snijder, H. H., Cajot, L-G. & Popa, N., 2014, In : Journal of Constructional Steel Research. 101, p. 280-289 10 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
7 Citations (Scopus)
201 Downloads (Pure)

Buckling curves for heavy wide flange steel columns

Snijder, H. H., Cajot, L-G., Popa, N. & Spoorenberg, R. C., 2014, In : Romanian Journal of Technical Science : Applied Mechanics. 59, 1/2, p. 178-204 27 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
96 Downloads (Pure)

Editorial of the special issue on stability and nonlinear analysis of steel structures

Dubina, D., Snijder, H. H. & Simoes da Silva, L., 2014, In : Romanian Journal of Technical Science : Applied Mechanics. 59, 1/2, p. 3-8 6 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
57 Downloads (Pure)

Harmonization of the safety level of design rules for steel structures : from ductile to brittle failure modes

Taras, A., Simoes da Silva, L., Marques, L., Kuhlmann, U. & Snijder, H. H., 2014, Eurosteel 2014 – 7th European Conference on Steel and Composite Structures, 10-12 September 2014, Naples, Italy. Landolfo, R. & Mazzolani, F. M. (eds.). Brussels: ECCS European Convention for Constructional Steelwork, p. 1037-1038

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
87 Downloads (Pure)

Investigation of the net cross-section failure mechanism : experimental research

Rombouts, I. M. J., Francken, W. L., Dekker, R. W. A. & Snijder, H. H., 2014, Eurosteel 2014 – 7th European Conference on Steel and Composite Structures, 10-12 September 2014, Naples, Italy. Landolfo, R. & Mazzolani, F. M. (eds.). Brussels: ECCS European Convention for Constructional Steelwork, p. 267-268 and full 6 pages paper on USB-stick

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
80 Downloads (Pure)

Numerical simulation of fatigue crack growth rate and crack retardation due to an overload using a cohesive zone model

Silitonga, S., Maljaars, J., Soetens, F. & Snijder, H. H., 2014, 11th International Fatigue Congress, 2-7 March 2014,. Clark, G. & Wang, C. H. (eds.). Switzerland: Trans Tech Publications, p. 777-783 (Advanced Materials Research; vol. 891-892).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
2 Citations (Scopus)
230 Downloads (Pure)

Risk evaluation in Dutch land-use planning

Xanten, van, N. H. W., Pietersen, C. M., Pasman, H. J., Torn, van der, P., Vrijling, H. K., Wal, van der, A. J. & Kerstens, J. G. M., 2014, In : Process Safety and Environmental Protection. 92, 4, p. 368-376 9 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
5 Citations (Scopus)
192 Downloads (Pure)
2013

Belastingen en belastingcombinaties

Snijder, H. H., 2013, GTS 2013 : Grafieken en tabellen voor staal en staalconstructies voor gebouwen gebaseerd op Eurocode 0, 1 en 3. Eldik, C. H. V. (ed.). Zoetermeer: Bouwen met staal, p. 20-55 35 p.

Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

5 Downloads (Pure)

Environmental impact as a parameter in concrete construction parametric associative models

Dijk, M., Blom, I., Salet, T. A. M. & Marinus, P. C. P., 2013, Proceedings of the first international conference on concrete sustainability (ICCS13) : May 27-29, 2013, Tokyo, Japan. p. 740-745

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

3 Downloads (Pure)

Experimental investigation on residual stresses in heavy wide flange QST steel sections

Spoorenberg, R. C., Snijder, H. H., Cajot, L-G. & May, M. S., 2013, In : Journal of Constructional Steel Research. 89, p. 63-74 12 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
9 Citations (Scopus)
406 Downloads (Pure)

Fatigue of threaded rods in cable anchorages due to vortex shedding

Snijder, H. H. & Maljaars, J., 2013, 36th IABSE Symposium, 24-27 September 2013, Kolkata. Zurich: International Association for Bridge and Structural Engineering, p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
1 Citation (Scopus)
66 Downloads (Pure)

Kipgedrag bij niet-optimaal geplaatste flexibele kipsteun

Bruins, R. H. J., Snijder, H. H., Steenbergen, H. M. G. M. & Hoenderkamp, J. C. D., 2013, In : Bouwen met Staal. 2013, 233, p. 38-43 6 p.

Research output: Contribution to journalArticleProfessional

1 Downloads (Pure)

Kleurrijk grijs

Salet, T. A. M., 2013, In : Cement. 65, 8, p. 46-51 6 p.

Research output: Contribution to journalArticleProfessional

Out-of-plane stability of roller bent steel arches – an experimental investigation

La Poutre, D. B., Spoorenberg, R. C., Snijder, H. H. & Hoenderkamp, J. C. D., 2013, In : Journal of Constructional Steel Research. 81, p. 20-34 15 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
21 Citations (Scopus)
261 Downloads (Pure)

Parametric design and calculation of circular and elliptical tensegrity domes

Beetz, J., Telgen, van, M. V., Snijder, H. H. & Habraken, A. P. H. W., 2013, IASS 2013 Symposium The International Association for Shell and Spatial Structures( IASS), 23-27 September 2013, Wroclaw. Wroclaw, Poland

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Plastic collapse load of crown-hinged steel circular arches : a theoretical method

Spoorenberg, R. C., Snijder, H. H. & Hoenderkamp, J. C. D., 2013, In : Advances in Structural Engineering. 16, 4, p. 721-740 20 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
274 Downloads (Pure)

Slender high strength steel column laterally supported by glass panes

Dierks, D., Huveners, E. M. P., Snijder, H. H. & Spoorenberg, R. C., 2013, In : Heron. 58, 1, p. 1-24 24 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
1 Citation (Scopus)
52 Downloads (Pure)

Survey on damage mechanics models for fatigue life prediction

Silitonga, S., Maljaars, J., Soetens, F. & Snijder, H. H., 2013, In : Heron. 58, 1, p. 25-60 36 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
5 Citations (Scopus)
100 Downloads (Pure)
2012

A theoretical method for calculating the collapse load of steel circular arches

Spoorenberg, R. C., Snijder, H. H. & Hoenderkamp, J. C. D., 2012, In : Engineering Structures. 38, p. 89-103 15 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
7 Citations (Scopus)
515 Downloads (Pure)

Cold-bent laminated glass and steel canopy for a bus station next to Amsterdam Central Station

Vakar, L. I., Van Wolfswinkel, J. C. & Snijder, H. H., 2012, Proceedings of the 18th IABSE Congress on Innovative Infrastructures - Toward Human Urbanism, 19-21 September, Seoul, Korea. Zürich: International Association for Bridge and Structural Engineering, Vol. 2. p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

1 Downloads (Pure)

Composite action of steel frames and precast concrete infill panels with corner connections – Part 1 : experiments

Hoenderkamp, J. C. D., Snijder, H. H. & Hofmeyer, H., 2012, Proceedings of the 10th International Conference on Advances in Steel Concrete Composite and Hybrid Structure, 2-4 July, 2012, Singapore. Liew, J. Y. R. & Lee, S. C. (eds.). Singapore / India: Research Publishing, p. 702-709

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Composite action of steel frames and precast concrete infill panels with corner connections – Part 2 : finite element analysis

Hoenderkamp, J. C. D., Hofmeyer, H. & Snijder, H. H., 2012, Proceedings of the 10th International Conference on Advances in Steel Concrete Composite and Hybrid Structure, 2-4 July, 2012, Singapore. Liew, J. Y. R. & Lee, S. C. (eds.). Singapore / India: Research Publishing, p. 710-717

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Degree of coupling in high-rise mixed shear wall structures

Hoenderkamp, J. C. D., 2012, In : Sadhana : Academy Proceedings in Engineering Sciences (Indian Academy of Sciences). 37, 4, p. 481-492 12 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
1 Citation (Scopus)
333 Downloads (Pure)

Design rules for out-of-plane stability of roller bent steel arches with FEM

Spoorenberg, R. C., Snijder, H. H., Hoenderkamp, J. C. D. & Beg, D., 2012, In : Journal of Constructional Steel Research. 79, p. 9-21 13 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
18 Citations (Scopus)
107 Downloads (Pure)

High-Rise Structures with Belt Bracing Subject to Lateral Load

Hoenderkamp, J. C. D., Snijder, H. H. & Hofmeyer, H., 2012, In : Advances in Structural Engineering. 15, 1, p. 65-75 11 p.

Research output: Contribution to journalArticleAcademicpeer-review

2 Citations (Scopus)
7 Downloads (Pure)

Infill Panels and the tube connection in timber frames

Leijten, A. J. M., Jorissen, A. J. M. & Hoenderkamp, J. C. D., 2012, Proceedings of the World Conference on Timber Engineering (WCTE 2012), 16-19 July 2012, Auckland, New Zealand. p. 533-538

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
118 Downloads (Pure)

Kniklengtefactoren buisprofielen in gelaste vakwerken

Boel, H. D., Snijder, H. H., Hoenderkamp, J. C. D. & Spoorenberg, R. C., 2012, In : Bouwen met Staal. 230, 12, p. 44-49 6 p.

Research output: Contribution to journalArticleProfessional

Open Access
File
83 Downloads (Pure)

Mechanical model for steel frames with discretely connected precast concrete infill panels with window openings

Teeuwen, P. A., Kleinman, C. S. & Snijder, H. H., 2012, In : The Open Construction and Building Technology Journal. 6, 1-M12, p. 182-193 12 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
2 Citations (Scopus)
95 Downloads (Pure)

Mechanical properties of roller bent wide flange sections - part 1: Experimental investigation

Spoorenberg, R. C., Snijder, H. H. & Hoenderkamp, J. C. D., 2012, In : Journal of Constructional Steel Research. 68, 1, p. 51-62 12 p.

Research output: Contribution to journalArticleAcademicpeer-review

11 Citations (Scopus)
1 Downloads (Pure)

Mechanical properties of roller bent wide flange sections - part 2: Prediction model

Spoorenberg, R. C., Snijder, H. H. & Hoenderkamp, J. C. D., 2012, In : Journal of Constructional Steel Research. 68, 1, p. 63-77 15 p.

Research output: Contribution to journalArticleAcademicpeer-review

10 Citations (Scopus)

Natural periods of vibration of outrigger braced walls

Nicoreac, M. P. & Hoenderkamp, J. C. D., 2012, CD-ROM proceedings of the 6th european congress on computational methods in applied sciences and engineering (ECCOMAS 2012). Eberhardsteiner, J., Bohm, HJ. & Rammerstorfer, FG. (eds.). Vienna: Vienna University of Technology, p. 1-16

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Numerical simulation of stable fatigue crack growth rate using a cohesive zone model

Silitonga, S., Maljaars, J., Soetens, F. & Snijder, H. H., 2012, Proceedings of theEuropean Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), 10-14 September 2012, Vienna, Austria. Eberhardsteiner, J. & et al., X. (eds.). Vienna, p. 1-13

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
31 Downloads (Pure)

Out-of-plane buckling of roller bent wide flange arches - imperfections and finite element modeling

Spoorenberg, R. C., Snijder, H. H., Hoenderkamp, J. C. D. & Beg, D., 2012, Proceedings of seventh International Conference on Advances in Steel Structures. Chan, S. L. & Shu, G. P. (eds.). Nanjing: Southeast University Press, p. 1355-1362

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

1 Downloads (Pure)

Periods of vibration of braced frames with outriggers

Nicoreac, M. P. & Hoenderkamp, J. C. D., 2012, In : Procedia Engineering. 40, p. 298-303

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
4 Citations (Scopus)
89 Downloads (Pure)

Push-Pull interface connections in steel frames with precast concrete infill panels

Hoenderkamp, J. C. D., Snijder, H. H. & Hofmeyer, H., 2012, In : The Open Construction and Building Technology Journal. 6, Suppl 1-M4, p. 63-73

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
4 Citations (Scopus)
67 Downloads (Pure)

Structural properties and out-of-plane stability of roller bent steel arches

Spoorenberg, R. C., Snijder, H. H. & Hoenderkamp, J. C. D., 2012, In : Structural Engineering International. 22, 1, p. 154- 1 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
28 Downloads (Pure)
2011

Buckling length factors for welded lattice girders with hollow section braces and chords

Snijder, H. H., Boel, H. D., Hoenderkamp, J. C. D. & Spoorenberg, R. C., 2011, Proceedings of the 6th European Conference on Steel and Composite Structures (Eurosteel 2011), 31 August - 2 September 2011, Budapest, Hungary. Dunai, L., Iványi, M., Jármai, K., Kovács, N. & Vigh, L. G. (eds.). Brussels: ECCS, p. 1881-1886

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
57 Downloads (Pure)

De invloed van koudbuigen op restspanning, sterkte en taaiheid (Stabiliteit van vrijstaande bogen [1])

Spoorenberg, R. C., Snijder, H. H. & Hoenderkamp, J. C. D., 2011, In : Bouwen met Staal. 44, 219, p. 1-17 17 p.

Research output: Contribution to journalArticleProfessional

Dynamic Analysis of the Rotterdam Central Station Footbridge

Breman, C., Stuit, H. G. & Snijder, H. H., 2011, Proceedings of the 4th International Footbridge Conference, 6-8 July 2011, Wroclaw, Poland. Biliszczuk, J., Bien, J., Hawryszkow, P. & Kaminski, T. (eds.). Wroclaw: DWE (Dolnoslaskie Wydawnictwo Edukacyjne, p. 1075-1084

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
124 Downloads (Pure)

Finite element simulations of residual stresses in roller bent wide flange sections

Spoorenberg, R. C., Snijder, H. H. & Hoenderkamp, J. C. D., 2011, In : Journal of Constructional Steel Research. 67, 1, p. 39-50 12 p.

Research output: Contribution to journalArticleAcademicpeer-review

25 Citations (Scopus)
4 Downloads (Pure)

Krachtswerking : grondslagen voor het berekenen en toetsen van staalconstructies voor gebouwen volgens Eurocode 0,1 en 3

Snijder, H. H. & Steenbergen, H. M. G. M., 2011, Zoetermeer: Bouwen met staal. 284 p.

Research output: Book/ReportBookAcademic

Lateral Stiffness of Timber Frames with CLT Infill Panels

Leijten, A. J. M., Jorissen, A. J. M. & Hoenderkamp, J. C. D., 2011, AES-ATEMA’ 2011 Ninth International Conference. Haddad, Y. M. (ed.). Ottawa: Advanced Engineering Solutions, p. 39-47 (ASE Technical Reviews International Journal (Series)).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
100 Downloads (Pure)

Preliminary design of high-rise shear wall with outriggers and basement fin walls on non-rigid foundation

Hoenderkamp, J. C. D., 2011, Proceedings of the 36th International Conference on Our World in Concrete & Structures, 14-16 August 2011, Singapore. Singapore, p. 249-258

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Proposed residual stress model for roller bent wide flange sections

Spoorenberg, R. C., Snijder, H. H. & Hoenderkamp, J. C. D., 2011, In : Journal of Constructional Steel Research. 67, 6, p. 992-1000 9 p.

Research output: Contribution to journalArticleAcademicpeer-review

17 Citations (Scopus)
1 Downloads (Pure)

Steel Frames with Discretely Connected Precast Concrete Infill Panels

Snijder, H. H., Hofmeyer, H. & Hoenderkamp, J. C. D., 2011, IABSE-IASS 2011 London Symposium Report Compact Disc (CD-ROM). London: International Association for Bridge and Structural Engineering, p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2 Downloads (Pure)

Structural properties and out-of-plane stability of roller bent steel arches

Spoorenberg, R. C., 2011, Eindhoven: Technische Universiteit Eindhoven. 169 p.

Research output: ThesisPhd Thesis 1 (Research TU/e / Graduation TU/e)

Open Access
File
1374 Downloads (Pure)

The influence of single shear walls on the behaviour of coupled shear walls in high-rise structures

Hoenderkamp, J. C. D., 2011, The Twelfth East Asia-Pacific Conference on Structural Engineering and Construction. Tam, CM., Lam, HF., Kitipornchai, S. & Lo, YT. (eds.). Hong Kong: City University of Hong Kong

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

1 Citation (Scopus)
2010

Aluminium structures exposed to fire conditions - an overview

Maljaars, J., Twilt, L., Fellinger, J. H. H., Snijder, H. H. & Soetens, F., 2010, In : Heron. 55, 2, p. 85-116 32 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
17 Citations (Scopus)
101 Downloads (Pure)

Design of a transparent column in glass and steel

Roebroek, F., Snijder, H. H., Herwijnen, van, F. & Huveners, E. M. P., 2010, Proceedings of Challenging Glass 2 - Conference on Architectural and Structural Applications of Glass. Bos, X., Louter, X. & Veer, X. (eds.). p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2 Citations (Scopus)
1 Downloads (Pure)