Research Output

2e Spoorbrug Amsterdam-Rijnkanaal, Weesp : verstijfde staafboogbrug wordt tweeling

Alberti, R. H., Jager, de, R., Smit, C. & Snijder, H. H., 1995, In : Railevant : Informatieblad voor de Leden van de Weg en Werken Vereniging. 41, 6, p. 5-12 8 p.

Research output: Contribution to journalArticleProfessional

2 Downloads (Pure)

About ECCS and its technical committee TC8 on the stability of steel structures

Snijder, H. H. B. & Lindner, J., 1 Nov 2019, In : Steel Construction : Design and Research. 12, 4, p. 372-376 5 p.

Research output: Contribution to journalArticleProfessional

Added value of regular in-service visual inspection to the fatigue reliability of structural details in steel bridges

Hashemi, S., Maljaars, J. & Snijder, B., 2019, 5th International Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures – SMAR 2019: Proceedings. p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
10 Downloads (Pure)

Adhesively bonded joints in aluminium structures - development of a material model to predict the change in cohesive strength of a joint due to ageing under static loads

Botter, H., 2001, Proceedings of the annual conference of the research school structural engineering. Zeist, p. 16-17

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

A FE-model for Analising Spatial Stability of Arches

La Poutre, D., Snijder, H. H. & Hoenderkamp, J. C. D., 2003, Proceedings of Structural Stability Research Council, Baltimore, USA. Iwankiw, N. (ed.). Missouri-Rolla: Structural Stability Research Council University, p. 279-298

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Aluminium bridges, actual designs and prospects

Soetens, F., Hove, van, B. W. E. M. & Mennink, J., 2003, Proceedings of the International Conference Advances in Structures, Steel, concrete, Coimposite and Aluminium, ASSCCA '03, Sydney, Australia. Hancock, G. J. & et al, X. (eds.). Balkema, p. 443-448

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Aluminium Bridges in The Netherlands

Soetens, F., Hove, van, B. W. E. M. & Mennink, J., 2001, Proceedings of the 8th International Conference on Joints in Alumunium. Munich Germany, p. 9-

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Aluminium building and civil engineering structures

Soetens, F. & Mennink, J., 1999, Light-Weight Steel and Aluminium Structures. Fourth International Conference on Steel and Aluminium Structures. Mäkeläinen, P. & Hassinen, P. (eds.). Amsterdam: Elsevier, p. 487-494 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

Aluminium Building and Civil Engineering Structures, Literary survey of local buckling

Mennink, J., 1999, onbekend: Staal.

Research output: Book/ReportReportAcademic

Aluminium Structural Design, resistance of connections

Soetens, F. & Hove, van, B. W. E. M., 2001, Proceedings of CISM Workshop. Udine Italie

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

Aluminium structures exposed to fire conditions - an overview

Maljaars, J., Twilt, L., Fellinger, J. H. H., Snijder, H. H. & Soetens, F., 2010, In : Heron. 55, 2, p. 85-116 32 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
17 Citations (Scopus)
101 Downloads (Pure)

Amsterdam CS: Middenkap

Spoon, M., Snijder, H. H., Bilsen, H. P. & Bosch, van den, J., 1997, In : Railevant : Informatieblad voor de Leden van de Weg en Werken Vereniging. 43, 2, p. 4-15

Research output: Contribution to journalArticleProfessional

Analysis of high-rise braced frames with outriggers

Hoenderkamp, J. C. D. & Bakker, M. C. M., 2003, In : The Structural Design of Tall and Special Buildings. 12, 4, p. 335-350 15 p.

Research output: Contribution to journalArticleAcademicpeer-review

56 Citations (Scopus)
4 Downloads (Pure)

Analysis of steel frames with precast concrete infill panels

Teeuwen, P. A., Kleinman, C. S., Snijder, H. H. & Hofmeyer, H., 2008, 17th Congress of IABSE, Creating and Renewing Urban Structures- Tall Buildings, Bridges and Infrastructure, Chicago 2008. IABSE-AIPPC-IVBH, X. (ed.). Zurich, Switzerland: International Association for Bridge and Structural Engineering, p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
235 Downloads (Pure)

A new test for stud connectors in ribbed slabs

Sanden, van de, P. G. F. J., Stark, J. W. B., Snijder, H. H. & Bennenk, H. W., 1997, Proceedings Composite Construction -Conventional and Innovative Conference, Innsbruck, Austria, IABSE, Sept. 16-18. International Association for Bridge and Structural Engineering, p. 838-839

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

An FE-model for analyzing spatial stability of steel arches

La Poutré, D. B., Snijder, H. H. & Hoenderkamp, J. C. D., 1 Dec 2003, p. 279-298. 20 p.

Research output: Contribution to conferencePaperAcademic

4 Citations (Scopus)

Approximate analysis of high-rise frames with flexible connections

Hoenderkamp, J. C. D. & Snijder, H. H., 2000, In : The Structural Design of Tall Buildings. 9, 3, p. 233-248

Research output: Contribution to journalArticleAcademicpeer-review

13 Citations (Scopus)

A simple design rule for overlap joints

Straalen, van, IJ. J., Botter, H. & Adams, R. D., 2004, 7th International Conference Structural Adhesives in Engineering (SAE-VII). Bristol, UK

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

A slender transparent glass supported high-strength steel column

Snijder, H. H., Dierks, D., Huveners, E. M. P. & Spoorenberg, R. C., 2014, IABSE Symposium Madrid 2014, Engineering for Progress, Nature and People, 3-5 September 2014, Madrid, Spain. Zurich: International Association for Bridge and Structural Engineering, p. 488-489 and full 8 pages paper on CD

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
109 Downloads (Pure)

A theoretical method for calculating the collapse load of steel circular arches

Spoorenberg, R. C., Snijder, H. H. & Hoenderkamp, J. C. D., 2012, In : Engineering Structures. 38, p. 89-103 15 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
7 Citations (Scopus)
515 Downloads (Pure)

Behaviour of flange tip connections; premliminary testing and analysis

Snijder, H. H. & Hoenderkamp, J. C. D., 2004, Proceedings of the 5th World Workshop on Connections ECCS-AISC. Amsterdam

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Belastingen en belastingcombinaties

Snijder, H. H., 2013, GTS 2013 : Grafieken en tabellen voor staal en staalconstructies voor gebouwen gebaseerd op Eurocode 0, 1 en 3. Eldik, C. H. V. (ed.). Zoetermeer: Bouwen met staal, p. 20-55 35 p.

Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

5 Downloads (Pure)

Belastinggeval regenwater theoretisch geanalyseerd - Constructief ontwerpen : wateraccumulatie op lichte daken (2)

Fijneman, H. J., Herwijnen, van, F. & Snijder, H. H., 2004, In : Bouwen met Staal. 37, 178, p. 47-51 5 p.

Research output: Contribution to journalArticleProfessional

Bending Moment Connections

Berebak, J., Bunkers, J. A., Evers, H. G. A., Gresnigt, A. M., Heer, de, C., Hoenderkamp, J. C. D., Stark, J. W. B., Steenhuis, C. M. & Verhoeven, J. A. L. M., 1999, Rotterdam: Kennisoverdracht SG.

Research output: Book/ReportBookProfessional

Bending moment - shear force interaction of rolled I-shaped steel sections

Dekker, R. W. A., 9 Jan 2019, Eindhoven: Technische Universiteit Eindhoven. 249 p.

Research output: ThesisPhd Thesis 1 (Research TU/e / Graduation TU/e)

Open Access
File
38 Downloads (Pure)

Bending-shear interaction of I-shaped cross-sections : preliminary experimental research to verify the EC3 design rule

Snijder, H. H., Dekker, R. W. A. & Saric, I., 2014, Eurosteel 2014 – 7th European Conference on Steel and Composite Structures, 10-12 September 2014, naples, Italy. Landolfo, R. & Mazzolani, F. M. (eds.). Brussels: ECCS European Convention for Constructional Steelwork, p. 1039-1040 and full 6 pages paper on USB-stick

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
32 Downloads (Pure)

Bending-shear interaction of steel I-shaped cross-sections: statistical evaluation

Dekker, R. W. A., Snijder, H. H. & Maljaars, J., 2017, 8th European Conference on Steel and Composite Structures (EUROSTEEL 2017), September 13-15, 2017, Copenhagen, Denmark. p. 3699–3708 10 p. (CE/Papers; vol. 1, no. 2-3).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
488 Downloads (Pure)

Berekening krachtverdeling vakwerk

Snijder, H. H., 2009, In : Bouwen met Staal. 209, 6, p. 54-54 1 p.

Research output: Contribution to journalArticleProfessional

2 Downloads (Pure)

Betonnen vloerplaat als kipsteun voor stalen liggers

Snijder, H. H., Hoenderkamp, J. C. D. & Maljaars, J., 2007, In : Bouwen met Staal. 2007/6, 199, p. 54-57 4 p.

Research output: Contribution to journalArticleProfessional

1 Downloads (Pure)

Buckling curves for heavy wide flange QST columns based on statistical evaluation

Spoorenberg, R. C., Snijder, H. H., Cajot, L-G. & Popa, N., 2014, In : Journal of Constructional Steel Research. 101, p. 280-289 10 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
7 Citations (Scopus)
201 Downloads (Pure)

Buckling curves for heavy wide flange steel columns

Snijder, H. H., Cajot, L-G., Popa, N. & Spoorenberg, R. C., 2014, In : Romanian Journal of Technical Science : Applied Mechanics. 59, 1/2, p. 178-204 27 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
96 Downloads (Pure)

Buckling curves for lateral torsional buckling of unrestrained beams

Snijder, H. H. & Hoenderkamp, J. C. D., 2007, Proceedings of the Hommages á René Maquoi Birthday Anniversary, 14 December 2007, Luik, Belgium. Ville de Goyet, de, V., Jaspart, J-P. & Rondal, J. (eds.). Luik: Université de Liège, p. 239-248

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

5 Downloads (Pure)

Buckling experiments and FE simulations on complex aluminium extrusions

Mennink, J., Soetens, F., Snijder, H. H. & Hove, van, B. W. E. M., 2003, Proc. of the International Conference Advances in Structures, Steel, Concrete, Composite and Aluminium, ASSCCA '03, Sydney Australia. Hancock, G. J. & et al, X. (eds.). Balkema, p. 421-426

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Buckling experiments and finite element simulations on uniformly compressed alumium U-sections

Mennink, J., Soetens, F., Snijder, H. H. & Hove, van, B. W. E. M., 2001, NSCC 2001, 9th Nordic Steel Construction Conference, Proceedings. Mäkeläinen, P., Kesti, J., Jutila, A. & Kaitila, O. (eds.). Helsinki, Finland, p. 815-821

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Buckling length factors for welded lattice girders with hollow section braces and chords

Snijder, H. H., Boel, H. D., Hoenderkamp, J. C. D. & Spoorenberg, R. C., 2011, Proceedings of the 6th European Conference on Steel and Composite Structures (Eurosteel 2011), 31 August - 2 September 2011, Budapest, Hungary. Dunai, L., Iványi, M., Jármai, K., Kovács, N. & Vigh, L. G. (eds.). Brussels: ECCS, p. 1881-1886

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
57 Downloads (Pure)

Buckling of aluminium structural elements with arbitrary cross-sectional shapes

Kutanova, N., Soetens, F., Snijder, H. H. & Hove, van, B. W. E. M., 2007, Proceedings of the 10th International Conference on Joints in Alumunium 2007 (INALCO 2007), 24-26 October 2007, Osaka, Japan. Sato, dr., S. & Katayama, Prof., S. (eds.). p. 239-244

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Buckling of uniformly compressed complex aluminium extrusions

Mennink, J., 2001, Proceedings of the 3rd Aluminium Design Workshop. Boston

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

Cold-bent laminated glass and steel canopy for a bus station next to Amsterdam Central Station

Vakar, L. I., Van Wolfswinkel, J. C. & Snijder, H. H., 2012, Proceedings of the 18th IABSE Congress on Innovative Infrastructures - Toward Human Urbanism, 19-21 September, Seoul, Korea. Zürich: International Association for Bridge and Structural Engineering, Vol. 2. p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

1 Downloads (Pure)

Cold forming hot-rolled wide flange beams into arches : Preliminary finite element simulations

Spoorenberg, R. C., Snijder, H. H., Hoenderkamp, J. C. D. & Bakker, M. C. M., 2008, 5th European Conference on Steel and Composite Structures. Ofner, R., Beg, D., Fink, J., Greiner, R. & Unterweger, H. (eds.). Brussel: ECCS, Vol. B. p. 1837-1842

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

Combined web crippling and bending moment failure of first-generation trapezoidal steel sheeting

Hofmeyer, H., Kerstens, J. G. M., Snijder, H. H. & Bakker, M. C. M., 2002, In : Journal of Constructional Steel Research. 58, 12, p. 1509-1529

Research output: Contribution to journalArticleAcademicpeer-review

20 Citations (Scopus)
1 Downloads (Pure)

Combined Web crippling and bending moment failure of second-generation trapezoidal steel sheeting

Kaspers, M. & Snijder, H. H., 2001, onbekend: Faculteit Bouwkunde. (BCO-Report; vol. 01-18)

Research output: Book/ReportReportAcademic

Compatibility of S-N and crack growth curves in the fatigue reliability assessment of a welded steel joint

Hashemi, S. B., Maljaars, J., Leonetti, D. & Snijder, H. H., 6 Sep 2017, Procedia Structural Integrity. Vol. 5. p. 959-966 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
150 Downloads (Pure)

Composite action of steel frames and precast concrete infill panels with corner connections – Part 1 : experiments

Hoenderkamp, J. C. D., Snijder, H. H. & Hofmeyer, H., 2012, Proceedings of the 10th International Conference on Advances in Steel Concrete Composite and Hybrid Structure, 2-4 July, 2012, Singapore. Liew, J. Y. R. & Lee, S. C. (eds.). Singapore / India: Research Publishing, p. 702-709

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Composite action of steel frames and precast concrete infill panels with corner connections – Part 2 : finite element analysis

Hoenderkamp, J. C. D., Hofmeyer, H. & Snijder, H. H., 2012, Proceedings of the 10th International Conference on Advances in Steel Concrete Composite and Hybrid Structure, 2-4 July, 2012, Singapore. Liew, J. Y. R. & Lee, S. C. (eds.). Singapore / India: Research Publishing, p. 710-717

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Composite Behaviour of Infilled Steel Frames with Precast reinforced Concrete Panels with Window Openings

Teeuwen, P. A., Kleinman, C. S. & Snijder, H. H., 2006, Syllabus TUE-COUT Researchdag 2006. Eindhoven: Unit COUT, Faculteit Bouwkunde, p. 11-21

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Composite behaviour of steel frames with precast concrete infilled panels Life

Hoenderkamp, J. C. D., 2005.

Research output: Contribution to conferenceOtherAcademic

Composite Behaviour of Steel Frames with Precast Concrete Infill Panels

Hoenderkamp, J. C. D., Hofmeyer, H. & Snijder, H. H., 2005, EUROSTEEL 2005 : 4th European conference on steel and composite structures : research, Eurocodes, practice : Maastricht, The Netherlands, June 8-10, 2005. Hoffmeister, B. & Hechler, O. (eds.). Aachen: Verlag Mainz, p. (4.2-) 31-(4.2-) 40

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
35 Downloads (Pure)

Connections in aluminium structures, design examples

Hove, van, B. W. E. M. & Soetens, F., 2001, Proceedings of SICM Workshop. Udine italie

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

Constructiesystemen voor hallen

Translated title of the contribution: Structural systems for hallsSnijder, H. H., 2019, Hallen: kenmerken en constructiesystemen van stalen hallen en het ontwerp van een éénbeukige geschoorde hal volgens Eurocode 3. van Eldik, C. H. (ed.). Zoetermeer: Bouwen met staal, 28 p.

Research output: Chapter in Book/Report/Conference proceedingChapterProfessional