Content available in repository
Content available in repository
- 1 - 50 out of 439 results
Search results
-
2023
Experimental Study to Assess Micro-mechanical Behavior of Oil Paintings over Time
Bagheri Behboud, A., Hoefnagels, J. P. M., Hermans, J. J. & Bosco, E., 31 Oct 2023, Twenty-sixt Engineering Mechanics Symposium: October 30- October31, 2023, Hotel Papendal, Arnhem. van Outvorst, R. A. M. F. (ed.). Eindhoven University of Technology, p. 69Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic
Open AccessFile1 Downloads (Pure) -
Sound insulation performance of ventilated labyrinthine metamaterial described by enriched homogenized continuum
Liupekevicius, R., van Dommelen, H., Geers, M. & Kouznetsova, V., 2023, META 2023 Paris - France: 13th International Conference on Metamaterials, Photonic Crystals and Plasmonics. Lalanne, P. & Zouhdi, S. (eds.). META, p. 1495 1 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
Open AccessFile4 Downloads (Pure) -
Unraveling the Effect of Microstructure on Edge Ductility of Dual-Phase Steels: A Computational Modelling Study
Rezazadeh, V., Hoefnagels, J. P. M., Geers, M. G. D. & Peerlings, R. H. J., 20 Sept 2023, Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity: ICTP 2023 - Volume 4. Mocellin, K., Bouchard, P.-O., Bigot, R. & Balan, T. (eds.). Cham: Springer, p. 674-685 12 p. (Lecture Notes in Mechanical Engineering).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
Open AccessFile1 Downloads (Pure) -
2022
Emergent phenomena in locally resonant acoustic metamaterials due to subharmonic energy exchange
Kouznetsova, V. G., Silva, P. B., Zega, V., Leamy, M. & Geers, M. G. D., 2022, META 2022 Torremolinos-Spain: The 12th International Conference on Metamaterials, Photonic Crystals and Plasmonics. Zouhdi, S. (ed.). META, p. 92-93 2 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
1 Downloads (Pure) -
Re-understanding the in-plane hygro-expansion of freely and restrained dried paper handsheets
Vonk, N. H., Peerlings, R. H. J., Geers, M. G. D. & Hoefnagels, J. P. M., 29 Aug 2022, 17th Fundamental Research Society Symposium 2022. Pulp & Paper Fundamental Research Society (FRC), p. 421-440 20 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
Open AccessFile53 Downloads (Pure) -
2021
An in-depth insight of the mechanical response of cellulose fibres by means of optical profilometry techniques
Maraghechi, S., Bosco, E., Hoefnagels, J. P. M. & Suiker, A. S. J., 8 Jul 2021, Optics for Arts, Architecture, and Archaeology VIII. Liang, H. & Groves, R. (eds.). SPIE, 9 p. 1178415. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11784).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
3 Citations (Scopus) -
Localization analysis of damage for one-dimensional peridynamic model
Mikeš, K., Jirásek, M., Zeman, J., Rokoš, O. & Peerlings, R. H. J., 22 Apr 2021, NMM 2020 Nano and Macro Mechanics. Czech Technical University in Prague, p. 47-52 6 p. (Acta Polytechnica CTU Proceedings; vol. 30).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
Open Access -
Real-Time Nonlinear Tracking Control of Photopolymerization for Additive Manufacturing
Classens, K., Hafkamp, T., Westbeek, S., Remmers, J. J. C. & Weiland, S., 28 Jul 2021, 2021 American Control Conference (ACC). Institute of Electrical and Electronics Engineers, p. 1365-1370 6 p. 9483091Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
-
2020
Quadratic Tracking Control of Photopolymerization for Additive Manufacturing
Classens, K. H. J., Hafkamp, T. M., Westbeek, S., Remmers, J. J. C. & Weiland, S., 11 Mar 2020, 39th Benelux Meeting on Systems and Control: Book of Abstracts. Carloni, R., Jayawardhana, B. & Lefeber, E. (eds.). Groningen: University of Groningen, p. 127 1 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
Open AccessFile72 Downloads (Pure) -
2019
Consistent transient thermomechanical process modeling for additive manufacturing
Knippenberg, J., Remmers, J. J. C., Etman, L. F. P. & Geers, M. G. D., 11 Sept 2019, Proceedings of the II International Conference on Simulation for Additive Manufacturing SIM-AM 2019.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic
Open AccessFile97 Downloads (Pure) -
Investigation of stencil/ screen printing of silver (Ag) electrodes for ionic polymer metal composites (IPMCs)
Sideris, E. A., Augoulas, E. I., Homburg, E., van Maris, M. P. & de Lange, R. C., 13 Mar 2019, Electroactive Polymer Actuators and Devices (EAPAD) XXI. Bar-Cohen, Y., Anderson, I. A. & Johnson, N. L. (eds.). SPIE, 7 p. 1096607. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 10966).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
1 Downloads (Pure) -
Modeling anisotropic and rate-dependent plasticity in short-fiber reinforced thermoplastics
Amiri Rad, A., Pastukhov, L., Govaert, L. E. & van Dommelen, J. A. W., Sept 2019, 15th International Conference on Computational Plasticity. Fundamentals and Applications, COMPLAS 2019. Onate, E., Owen, D. R. J., Peric, D., Chiumenti, M. & de Souza Neto, E. (eds.). Barcelona: International Center for Numerical Methods in Engineering (CIMNE), p. 385-394 10 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
Open AccessFile52 Downloads (Pure) -
Thermomechanical process modeling for additive manufacturing using element addition
Knippenberg, J., Remmers, J. J. C., Etman, L. F. P. & Geers, M. G. D., 23 Oct 2019, Thermomechanical Process Modeling for Additive Manufacturing using element addition.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic
-
2018
Crystal plasticity parameter identification by integrated DIC on microscopic topographies
Hoefnagels, J. P. M., Bertin, M., Du, C. & Hild, F., 2018, Residual Stress, Thermomechanics and Infrared Imaging, Hybrid Techniques and Inverse Problems: Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics. Baldi, A., Considine, J. M., Quinn, S. & Balandraud, X. (eds.). Berlin: Springer, Vol. 8. p. 47-49 3 p. (Conference Proceedings of the Society for Experimental Mechanics Series).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
1 Citation (Scopus)1 Downloads (Pure) -
Mechanical shape correlation: a novel integrated digital image correlation approach
Kleinendorst, S. M., Hoefnagels, J. P. M. & Geers, M. G. D., 2018, Advancement of Optical Methods in Experimental Mechanics, Volume 3: Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics. Lamberti, L., Lin, M.-T., Furlong, C. & Sciammarella, C. (eds.). Dordrecht: Springer, p. 47-54 8 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
2 Citations (Scopus)2 Downloads (Pure) -
Molecular statics simulation of dislocation pileup using quasicontinuum method
Mikes, K., Rokos, O. & Peerlings, R. H. J., 2018, Proceedings of the 24th International Conference Engineering Mechanics 2018. Prague: Institute of Theoretical and Applied Mechanics Academy of Sciences of the Czech Republic, p. 553-556 4 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
Open Access -
Non-local damage modeling for composite laminates: application to isogeometric analysis for impact simulations
Pigazzini, M. S., Kamensky, D., van Iersel, D. A. P., Remmers, J. & Bazilevs, Y., 2018, 33rd Technical Conference of the American Society for Composites 2018. Waas, A. (ed.). p. 2146-2158 13 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic
-
Novel image correlation based techniques for mechanical analysis of MEMS
Kleinendorst, S. M., Borger, R. R. M., Hoefnagels, J. P. M. & Geers, M. G. D., 2018, Micro and nanomechanics. Starman, L. & Hay, J. (eds.). Cham: Springer, p. 19-28 10 p. (Conference Proceedings of the Society for Experimental Mechanics Series; no. 5).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
-
On micromechanical parameter identification and the role of kinematic boundary conditions
Rokos, O., Hoefnagels, J. P. M., Peerlings, R. H. J. & Geers, M. G. D., 23 Mar 2018, Photomechanics 2018 (PM 2018), 20-22 march 2018, Toulouse, France. p. 109-110 2 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
Open AccessFile93 Downloads (Pure) -
On micromechanical parameter identification and the role of kinematic boundary conditions in integrated digital image correlation
Rokos, O., Hoefnagels, J. P. M., Peerlings, R. H. J. & Geers, M. G. D., 28 Mar 2018, 16th European Mechanics and Materials Conference (EMMC 16), 26-28 March 2018, Nantes, France. 1 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
Open AccessFile88 Downloads (Pure) -
On the boundary conditions and optimization methods in integrated digital image correlation
Kleinendorst, S. M., Verhaegh, B. J., Hoefnagels, J. P. M., Ruybalid, A., van der Sluis, O. & Geers, M. G. D., 2018, Advancement of Optical Methods in Experimental Mechanics, Volume 3: proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics. Lamberti, L., Lin, M.-T., Furlong, C. & Sciammarella, C. (eds.). Dordrecht: Springer, p. 55-61 7 p. (Conference Proceedings of the Society for Experimental Mechanics Series book series (CPSEMS)).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
2 Citations (Scopus)2 Downloads (Pure) -
Size effects in mechanical metamaterials exhibiting instability-induced pattern transformations
Mohammed Ameen, M., Rokos, O., Peerlings, R. H. J. & Geers, M. G. D., 2018, Engineering Mechanics Institute Conference 2018 (EMI 2018) co-organized by M.I.T., C.N.R.S and the University of Massachusetts at Dartmouth.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
-
2017
A micro-mechanical modelling study of drying restraint effects on the hygro-mechanics of paper sheets
Bosco, E., Peerlings, R. H. J. & Geers, M. G. D., Sept 2017, Advances in Pulp and Paper Research: Transactions of the 16th Fundamental Research Symposium, 3-8 September 2017, Oxford, United Kingdom. Batchelor, W. & Söderberg, D. (eds.). Bury: Pulp & Paper Fundamental Research Society (FRC), p. 627-649Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
Open AccessFile136 Downloads (Pure) -
An enriched quasi-continuum approach to crack propagation in discrete lattices
Rokos, O., Peerlings, R. H. J., Zeman, J. & Beex, L. A. A., 16 Jun 2017, Fifth International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
Open AccessFile45 Downloads (Pure) -
Boundary mechanics in lath martensite, studied by uni-axial micro-tensile tests
Hoefnagels, J. P. M., Du, C. & Geers, M. G. D., 2017, Micro and Nanomechanics, Volume 5: Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics . Starman, L. V., Hay, J. & Karanjgaokar, N. (eds.). Dordrecht: Springer, p. 21-25 5 p. (Conference Proceedings of the Society for Experimental Mechanics Series ; vol. 2017).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
2 Citations (Scopus)2 Downloads (Pure) -
Extended variational quasicontinuum methodology for modelling of crack propagation in discrete lattice systems
Rokos, O., Peerlings, R. H. J., Zeman, J. & Beex, L. A. A., 20 Jul 2017, 14th U.S. National Congress on Computational Mechanics (USNCCM). 1 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
Open AccessFile56 Downloads (Pure) -
Full-field identification methods: comparison of FEM updating and integrated DIC
Ruybalid, A. P., Hoefnagels, J. P. M., van der Sluis, O. & Geers, M. G. D., 2017, Advancement of Optical Methods in Experimental Mechanics, Volume 3: Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics. Yoshida, S., Lamberti, L. & Siammarella, C. (eds.). Dordrecht: Springer, p. 191-197 7 p. (Conference Proceedings of the Society for Experimental Mechanics Series ; vol. 2017).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
9 Downloads (Pure) -
Full-field identification of interfaces in microelectronic devices
Ruybalid, A. P., Hoefnagels, J. P. M., van der Sluis, O. & Geers, M. G. D., 2017, Micro and Nanomechanics, Volume 5: Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics. Starman, L. V., Hay, J. & Karanjgaokar, N. (eds.). Dordrecht: Springer, p. 9-13 5 p. (Conference Proceedings of the Society for Experimental Mechanics Series ; vol. 2017).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
8 Downloads (Pure) -
Higher-order asymptotic homogenization of periodic linear elastic composite materials at low scale separation
Ameen, M., Peerlings, R. H. J. & Geers, M. G. D., 2017, Contributions to the Foundations of Multidisciplinary Research in Mechanic: papers presented during the 24th International Congress of Theoretical and Applied Mechanics (ICTAM 2016) held in Montreal, Canada, August 22-26, 2016. Floryan, J. M. (ed.). IUTAM, Vol. 3. p. 2544-2545 2 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
Open AccessFile258 Downloads (Pure) -
Hydraulic fracturing in anisotropic and heterogeneous rocks
Valliappan, V., Remmers, J. J. C., Barnhoorn, A. & Smeulders, D. M. J., 2017, Poromechanics 2017 - Proceedings of the 6th Biot Conference on Poromechanics, 9-13 July 2017, Paris, France. s.l.: American Society of Civil Engineers, p. 2035-2040 6 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
4 Citations (Scopus) -
Hygro-mechanical structure–property relations for paper sheets
Peerlings, R. H. J., Bosco, E. & Geers, M. G. D., 2017, Contributions to the Foundations of Multidisciplinary Research in Mechanics: papers presented during the 24th International Congress of Theoretical and Applied Mechanics (ICTAM 2016) held in Montreal, Canada, August 22-26, 2016. Floryan, J. M. (ed.). IUTAM, p. 1929-1930 2 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
Open AccessFile143 Downloads (Pure) -
Multiscale modelling of damage and fracture in discrete materials using a variational quasicontinuum method
Rokoš, O., Peerlings, R. H. J., Beex, L. A. A. & Zeman, J., 7 Sept 2017, XIV International Conference on Computational Plasticity (COMPLAS).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
Open AccessFile58 Downloads (Pure) -
Numerical model for dislocation transmission across phase boundaries
Bormann, F., Peerlings, R. H. J. & Geers, M. G. D., 2017, Contributions to the Foundations of Multidisciplinary Research in Mechanics: papers presented during the 24th International Congress of Theoretical and Applied Mechanics (ICTAM 2016) held in Montreal, Canada, August 22-26, 2016. Floryan, J. M. (ed.). IUTAM, Vol. 3. p. 2534-2535 2 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
Open AccessFile101 Downloads (Pure) -
On the role and modelling of internal boundaries in size effects for metals
Geers, M. G. D., Kouznetsova, V. & Peerlings, R. H. J., 2017, Contributions to the Foundations of Multidisciplinary Research in Mechanics: papers presented during the 24th International Congress of Theoretical and Applied Mechanics (ICTAM 2016) held in Montreal, Canada, August 22-26, 2016. IUTAM, Vol. 3. p. 2460-2461 2 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
Open AccessFile141 Downloads (Pure) -
Self-adaptive isogeometric global digital image correlation and digital height correlation
Hoefnagels, J. P. M., Kleinendorst, S. M., Ruybalid, A. P., Verhoosel, C. V. & Geers, M. G. D., 2017, Advancement of Optical Methods in Experimental Mechanics - Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics. Yoshida, S., Lamberti, L. & Sciammarella, C. (eds.). Springer, Vol. 3. p. 165-172 8 p. (Conference Proceedings of the Society for Experimental Mechanics Series).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
1 Citation (Scopus)6 Downloads (Pure) -
Size effects in periodic materials with low scale separation
Mohammed Ameen, M., Rokos, O., Peerlings, R. H. J. & Geers, M. G. D., 2017, 5th International Conference on Material Modeling (ICMM5), 14-16 June 2017, Rome, Italy.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
1 Downloads (Pure) -
Strongly versus weakly non-local dislocation transport and pile-up
Mianroodi, J. R., Peerlings, R. H. J. & Svendsen, B., 2017, Contributions to the Foundations of Multidisciplinary Research in Mechanics: papers presented during the 24th International Congress of Theoretical and Applied Mechanics (ICTAM 2016) held in Montreal, Canada, August 22-26, 2016. Floryan, J. M. (ed.). IUTAM, p. 2464-2465 2 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
Open AccessFile136 Downloads (Pure) -
Swelling driven cracking in large deformation in porous media
Ding, J., Remmers, J. J. C., Malakpoor, K. & Huyghe, J. M., 2017, Poromechanics 2017 - Proceedings of the 6th Biot Conference on Poromechanics, 9-13 July 2017, Paris, France. s.l.: American Society of Civil Engineers, p. 648-655 8 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
1 Citation (Scopus) -
The role of kinematic boundary conditions and their (in)accuracy in micromechanical parameter identification
Rokoš, O., Hoefnagels, J. P. M., Peerlings, R. H. J. & Geers, M. G. D., 9 Nov 2017, Computational modeling of complex materials across the scales (CMCS).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
Open AccessFile69 Downloads (Pure) -
Unraveling the apparent ductility of lath martensite
Geers, M. G. D., Du, C., Maresca, F., Kouznetsova, V. G., Hoefnagels, J. P. M. & Curtin, W. A., 18 Jun 2017, 14th International Conference on Fracture. p. 542-543 2 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
1 Citation (Scopus) -
2016
A meso-scale model to study the compressive strength of woven carbon fiber reinforced plastics
Schormans, J. M. J., Remmers, J. J. C., Wilson, W. & Deshpande, V. S., 2016, ECCM 2016 - Proceedings of the 17th European Conference on Composite Materials, 26-30 June 2016, Munich, Germany. European Conference on Composite Materials, ECCMResearch output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
Open AccessFile143 Downloads (Pure) -
A statistical/computational/experimental approach to study the microstructural morphology of damage
Hoefnagels, J. P. M., Du, C., de Geus, T. W. J., Peerlings, R. H. J. & Geers, M. G. D., 2016, Fracture, Fatigue, Failure and damage Evolution, Vol. 8: Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics. Beese , A. M., Zehnder, A. T. & Xia, S. (eds.). Berlin: Springer, p. 61-65 (Conference Proceedings of the Society for Experimental Mechanics Series).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
6 Downloads (Pure) -
Experimental characterization of triaxially braided composites
García-Carpintero, A., Roelse, J. W., Knippenberg, J. J. M., Xu, J., Lopes, C. S. & González, C., 1 Jan 2016, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. Wels: European Conference on Composite Materials, ECCM, 6 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
2 Citations (Scopus)1 Downloads (Pure) -
Higher-order asymptotic homogenization of periodic materials with low scale separation
Ameen, M. M., Peerlings, R. H. J. & Geers, M. G. D., 2016, ECCOMAS Congress 2016 - Proceedings of the 7th European Congress on Computational Methods in Applied Sciences and Engineering. National Technical University of Athens, p. 2346-2352 7 p. (Eccomas Proceedia; vol. 1964).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
Open Access3 Citations (Scopus)1 Downloads (Pure) -
Multiscale mechanics of dynamical metamaterials
Geers, M. G. D., Kouznetsova, V., Sridhar, A. & Krushynska, A., 2016, Advances in Mechanics: Theoretical, Computational and Interdisciplinary Issues - 3rd Polish Congress of Mechanics, PCM 2015 and 21st International Conference on Computer Methods in Mechanics, CMM 2015. Kleiber, M., Burczynski, T., Wilde, K., Gorski, J., Winkelmann, K. & Smakosz, L. (eds.). CRC Press/Balkema, p. 11-12 2 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
-
Performance assessment of integrated digital image correlation versus FEM updating
Ruybalid, A. P., Hoefnagels, J. P. M., van der Sluis, O. & Geers, M. G. D., 2016, Conference Proceedings of the Society for Experimental Mechanics Series. Springer, Vol. 9. p. 11-15 5 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
1 Citation (Scopus)6 Downloads (Pure) -
Strategies for modelling delamination growth using isogeometric continuum shell elements
Remmers, J. J. C. & Fagerström, M., 2016, Proceedings of the 17th Europeaon Conference on Composite Materials (ECCM 17), Munich, Germany, 26-30 June, 2016. p. 1-8Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic
2 Downloads (Pure) -
Systematic analysis of fracture in two-phase materials at all stages
de Geus, T. W. J., Peerlings, R. H. J. & Geers, M. G. D., Aug 2016, Contributions to the Foundations of Multidisciplinary Research in Mechanics: papers presented during the 24th International Congress of Theoretical and Applied Mechanics (ICTAM 2016) held in Montreal, Canada, August 22-26, 2016. Floryan, J. M. (ed.). IUTAM, Vol. 3. p. 1814-1815 2 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
Open AccessFile114 Downloads (Pure) -
2015
A generic, time-resolved, integrated digital image correlation, identification approach
Hoefnagels, J. P. M., Neggers, J., Blaysat, B., Hild, F. & Geers, M. G. D., 2015, Advancement of Optical Methods in Experimental Mechanics - Proceedings of the 2014 Annual Conference on Experimental and Applied Mechanics. Jin, H., Sciammarella, C., Yoshida, S. & Lamberti, L. (eds.). New York: Springer, Vol. 3B. p. 257-263 7 p. (Conference proceedings of the Society for Experimental Mechanics series; vol. 3).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
6 Downloads (Pure) -
Analysis of transverse shear strains in pre-twisted thick beams using variational asymptotic method
Ameen, M. M. & Harursampath, D., 1 Jan 2015, Proceedings of the International Conference on Numerical Analysis and Applied Mathematics 2014, ICNAAM 2014. American Institute of Physics, 5 p. 360003. (AIP Conference Proceedings; vol. 1648, no. 1).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review