Research Output 1969 2020

Filter
Conference contribution
2012

The effect of the position of the supports on the behaviour of composite masonry walls

Martens, D. R. W. & Vermeltfoort, A. T., 2012, Proceedings of the 15th International Brick Block Masonry Conference, 3-6 June 2012, Florianapolis, Brazil. Florianapolis: Universidade Federal de Santa Catarina, p. 1-9

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

52 Downloads (Pure)

The perpendicular to grain compressive behaviour of timber beams

Leijten, A. J. M., de Leijer, B. & Jorissen, A. J. M., 2012, Proceedings of the World Conference on Timber Engineering (WCTE 2012), 16-19 July 2012, Auckland, New Zealand. p. 356-361

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Timber
Extrapolation
Finite element method
Experiments
2011
2 Downloads (Pure)

Automated Generation of Structural Solutions based on Spatial Designs to serve as a Support Tool in early Stages of the Design Process

Davila Delgado, J. M., Hofmeyer, H. & Kerstens, J. G. M., 2011, CONVR2011, Proceedings of the 11th International Conference on Construction Applications of Virtual Reality 2011. Bargstädt, H-J. & Ailland, K. (eds.). Weimar: Bauhaus-Universität Weimar, p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Engines
Structural analysis
Geometry
53 Downloads (Pure)

Buckling length factors for welded lattice girders with hollow section braces and chords

Snijder, H. H., Boel, H. D., Hoenderkamp, J. C. D. & Spoorenberg, R. C., 2011, Proceedings of the 6th European Conference on Steel and Composite Structures (Eurosteel 2011), 31 August - 2 September 2011, Budapest, Hungary. Dunai, L., Iványi, M., Jármai, K., Kovács, N. & Vigh, L. G. (eds.). Brussels: ECCS, p. 1881-1886

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
1 Downloads (Pure)

Classification of aluminium beams in fire, analytical and numerical results

Meulen, van der, O. R., Maljaars, J. & Soetens, F., 2011, Proceedings of: Structural engineering world conges 2011 (SEWC2011), April 4-6, Como Italy. p. 8-

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Fires
Aluminum
Patents and inventions
Insulation
Aluminum alloys
115 Downloads (Pure)

Dynamic Analysis of the Rotterdam Central Station Footbridge

Breman, C., Stuit, H. G. & Snijder, H. H., 2011, Proceedings of the 4th International Footbridge Conference, 6-8 July 2011, Wroclaw, Poland. Biliszczuk, J., Bien, J., Hawryszkow, P. & Kaminski, T. (eds.). Wroclaw: DWE (Dolnoslaskie Wydawnictwo Edukacyjne, p. 1075-1084

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
42 Downloads (Pure)

Finite Element Modelling of Unreinforced and Post-tensioned Masonry Shear Wall Assemblies

Meer, van der, L. J., Martens, D. R. W. & Vermeltfoort, A. T., 2011, Proceedings of the 9th Australasian Masonry Conference, Queenstown, New Zealand, February 2011. Ingham, J., Dhanasekar, M. & Masia, M. (eds.). p. 135-144

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Shear walls
Flanges
Bearing capacity
Loads (forces)
Office buildings
88 Downloads (Pure)

Lateral Stiffness of Timber Frames with CLT Infill Panels

Leijten, A. J. M., Jorissen, A. J. M. & Hoenderkamp, J. C. D., 2011, AES-ATEMA’ 2011 Ninth International Conference. Haddad, Y. M. (ed.). Ottawa: Advanced Engineering Solutions, p. 39-47 (ASE Technical Reviews International Journal (Series)).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Timber
Stiffness
Steel
Fasteners
Concretes
1 Downloads (Pure)

Moment Capacity of Cold-Formed Steel Angles Supporting Masonry Veneer Walls

Martens, D. R. W. & Meer, van der, L. J., 2011, Proceedings of the Eleventh North American Masonry Conference, Minneapolis, June 2011. Schultz, A. E., Weeks, J. S., Bigelow, O. & Bean Popehn, J. (eds.). p. 1-12

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Veneers
Steel
Buckling
Steel structures
Experiments

Preliminary design of high-rise shear wall with outriggers and basement fin walls on non-rigid foundation

Hoenderkamp, J. C. D., 2011, Proceedings of the 36th International Conference on Our World in Concrete & Structures, 14-16 August 2011, Singapore. Singapore, p. 249-258

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Shear walls
Stiffness
Bending (deformation)
Bending moments
2 Downloads (Pure)

Shear walls in terraced houses, activating masonry by using reinforcement

Vermeltfoort, A. T., 2011, 11th North American Masonry Conference, Minneapolis, MN (USA), June 2011. Minneapolis: University of Minnesota, p. 1-12

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Shear walls
Piers
Reinforcement
Bearings (structural)
Experiments
2 Downloads (Pure)

Steel Frames with Discretely Connected Precast Concrete Infill Panels

Snijder, H. H., Hofmeyer, H. & Hoenderkamp, J. C. D., 2011, IABSE-IASS 2011 London Symposium Report Compact Disc (CD-ROM). London: International Association for Bridge and Structural Engineering, p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Precast concrete
Steel
Analytical models
Stiffness
Concretes
2 Downloads (Pure)

Strength properties of pinned connections in aluminium truss girders

Hove, van, B. W. E. M. & Soetens, F., 2011, Structural Engineers World Congress 2011 Abstract Book. Riccardo De Col, X., Gian Carlo Giuliani, X., Fabio Capsiono, X. & Enzo Siviero, X. (eds.). Italy: L.E.G.O. spa, p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Aluminum beams and girders
Stiffness
Load limits
Elongation
Bearings (structural)

The influence of single shear walls on the behaviour of coupled shear walls in high-rise structures

Hoenderkamp, J. C. D., 2011, The Twelfth East Asia-Pacific Conference on Structural Engineering and Construction. Tam, CM., Lam, HF., Kitipornchai, S. & Lo, YT. (eds.). Hong Kong: City University of Hong Kong

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

shear
bending moments
indication
85 Downloads (Pure)

The problem of a failure criterion for glass-metal adhesive bonds

Callewaert, D. D., Hulle, van, A. A., Belis, J. L. I. F., Bos, F. P., Dispersyn, J. & Out, B., Jun 2011, Proceedings of Glass Performance Days 2011. p. 654-657 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

Open Access
File
2010
2 Downloads (Pure)

Acetylated wood in structural applications

Bongers, F., Alexander, J., Jorissen, A. J. M., Blass, H. J. & Hill, C., 2010, Proceedings of the 5th European Conference on Wood Modification (ECWM), Riga, September 2010. Riga, p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Wood
Timber
Bearings (structural)
Concretes
Fabrication
2 Downloads (Pure)

Bearing capacity of bolt washers

Leijten, A. J. M. & Jorissen, A. J. M., 2010, Proceedings of the World Conference on Timber Engineering, Trento, June 2010. Ceccotti, A. & Van de Kuilen, J-W. (eds.). Trento: CNR-IVALSA, p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Washers
Timber
Bolts
Bearing capacity
Analytical models

Blast resistance behaviour of steel frame structrures

Mediavilla Varas, J. & Soetens, F., 2010, 34th International Symposium on Bridge and Structural Engineering, September 2010, Venice, Italy. Zürich: International Association for Bridge and Structural Engineering, p. 226-236 (IABSE Reports).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Blast resistance
Explosions
Steel
Computer simulation
6 Downloads (Pure)

Calculation with a spread sheet of wind load distribution over shear walls

Vermeltfoort, A. T., 2010, Proceedings of the 8th International Masonry Conference, Dresden, July 2010. Dresden, p. 1027-1035

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Shear walls
Spreadsheets
Stiffness matrix
Loads (forces)
3 Downloads (Pure)

Composite action in CASIEL TLM walls, a literature review and experimental results

Vermeltfoort, A. T., 2010, 8th International Masonry Conference, Dresden, July 2010. Dresden, p. 149-160

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Calcium silicate
Composite materials
Loads (forces)
Railroad cars
Stiffness
4 Citations (Scopus)
120 Downloads (Pure)

Cross-sectional classification of aluminium beams subjected to fire

Meulen, van der, O. R., Maljaars, J. & Soetens, F., 2010, New frontiers in light metals : 11th international aluminium conference, INALCO'2010, June 23-25, 2010, Eindhoven, Netherlands. Katgerman, L. & Soetens, F. (eds.). IOS Press, p. 397-409

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Fires
Aluminum
Aluminum alloys
Temperature
2 Citations (Scopus)
1 Downloads (Pure)

Design of a transparent column in glass and steel

Roebroek, F., Snijder, H. H., Herwijnen, van, F. & Huveners, E. M. P., 2010, Proceedings of Challenging Glass 2 - Conference on Architectural and Structural Applications of Glass. Bos, X., Louter, X. & Veer, X. (eds.). p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Glass
Steel
Experiments
148 Downloads (Pure)

Determining the moment-curvature diagram of aluminium cross-sections in fire; a numerical code and practical examples

Meulen, van der, O. R., Maljaars, J., Soetens, F. & Twilt, L., 2010, Proceedings of the Sixth International Conference on Structures in Fire (SIF'10). Kodur, X. & Franssen, X. (eds.). p. 1015-1022

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Fires
Aluminum
Patents and inventions
Temperature
Insulation

DistortionalDistortional elastic buckling for aluminium:Available prediction models versus design specifications

Kutanova, N., Peköz, T. & Soetens, F., 2010, 11th INALCO. Soetens, F. & Katgerman, L. (eds.). Amsterdam: IOS Press, p. 353-363

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

15 Downloads (Pure)

Ductility in timber structures

Jorissen, A. J. M. & Fragiacomo, M., 2010, Proceedings of CIB-W18 meeting fortythree, Christchurch (New Zealand), August 2010. Blass, HJ. & Görlacher, R. (eds.). p. 1-11

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

79 Downloads (Pure)

Dynamic behaviour of AA 2024 under blast loading : experiments and simulations

Mediavilla Varas, J., Soetens, F., van der Meulen, R., Kroon, E. & Aanhold, van, J. E., 2010, 11th International Aluminium Conference, INALCO 2010. Soetens, F. & Katgerman, L. (eds.). Amsterdam: IOS Press, p. 409-417

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Strain rate
Shock testing
Hydraulics
Experiments
Toughening
1 Downloads (Pure)

Elastic strain energy release at failure and its consequence for structural glass testing and design

Bos, F. P., May 2010, Proceedings of Challenging Glass 2 : Conference on Architectural and Structural Applications of Glass, 20-21 May 2010, Delft, The Netherlands. Bos, F., Louter, C. & Veer, F. (eds.). Delft: Technische Universiteit Delft, p. 287-296

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

3 Citations (Scopus)
1 Downloads (Pure)

Experimental and Numerical Analyses of Aluminium Frames exposed to Fire Conditions

Maljaars, J. & Soetens, F., 2010, Proceedings of INALCO 2010, 11th International Aluminium Conference (‘New Frontiers in Light Metals’), Eindhoven, June 2010. Katgerman, X. & Soetens, X. (eds.). Eindhoven, p. 201-212

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Fires
Aluminum
Constitutive models
Temperature
1 Citation (Scopus)

Experimental Research on pinned Connections is Aluminium Truss Girders

Hove, van, B. W. E. M. & Soetens, F., 2010, 11th INALCO Conference 2010. New Frontiers in Light Metals. Katgerman, L. & Soetens, F. (eds.). Amsterdam: IOS Press, p. 129-139

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

5 Citations (Scopus)
1 Downloads (Pure)

Global test standards and code design rules for compressive strength perpendicular to grain

Leijten, A. J. M. & Jorissen, A. J. M., 2010, Proceedings of the World Conference on Timber Engineering, Trento, June 2010. Ceccotti, A. & Van de Kuilen, Dr., J-W. (eds.). Trento: CNR-IVALSA, p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Compressive strength
Timber
Bearing capacity
Structural design
2 Downloads (Pure)

Improved design methods for connections perpendicular to grain

Schoenmakers, D., Jorissen, A. J. M. & Leijten, A. J. M., 2010, Proceedings of the World Timber Engineering Conference 2010. Ceccotti, A. & Van de Kuilen, J-W. (eds.). Trento: CNR-IVALSA, p. 1-9

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Timber
Fasteners
Bearing capacity
Loads (forces)
Geometry
45 Downloads (Pure)

Prestress loss of high-strength calcium silicate element masonry with thin-layer mortar

Meer, van der, L. J., Martens, D. R. W. & Vermeltfoort, A. T., 2010, Proceedings of the 8th International Masonry Conference. Jäger, W., Haseltine, B. & Fried, A. (eds.). Dresden, p. 177-186

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Calcium silicate
Mortar
Creep
Shear walls
Compressive strength
1 Downloads (Pure)

Residual stress measurements in roller bent HE 100B sections

Spoorenberg, R. C., Snijder, H. H. & Hoenderkamp, J. C. D., 2010, SDSS' Rio 2010 Stability and Ductility of Steel Structures. de Batista, E. M., da Vellasco, P. C. G. & de Lima, L. R. O. (eds.). Rio de Janeiro: Federal University of Rio de Janeiro and State University of Rio de Janeiro, Vol. 2. p. 579-586

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Stress measurement
Residual stresses
Flanges
Steel
Arches
75 Downloads (Pure)

Stress distribution in masonry walls, loaded in pane, simulated with comsol

Vermeltfoort, A. T. & Schijndel, van, A. W. M., 2010, Comsol Conference Paris 2010. Paris: Comsol, p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Stress concentration
Mortar
Tensile stress
Compressive strength
Materials properties

The bearing strength of timber beams on discrete supports

Jorissen, A. J. M., Leijten, A. J. M. & Leijer, de, B., 2010, Proceedings of CIB-W18 meeting fortythree, Christchurch (New Zealand), September 2010. Blass, H. J. & Görlacher, R. (eds.). Karlsruhe: Karlsruher Institut für Technologie, p. 1-11

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Bearings (structural)
Timber
Finite element method

The influence of hardening conditions on the physical properties of masonry

Bertram, G. & Martens, D. R. W., 2010, Proceedings of the Eighth International Masonry Conference. p. 139-

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

1 Downloads (Pure)

The Sustainable Highway for Environmentally Constrained Urbanized Areas

Vakar, L. I. & Snijder, H. H., 2010, 34th International Symposium on Bridge and Structural Engineering, Venice, September 2010. Zuerich: International Association for Bridge and Structural Engineering, p. 1-10 (IABSE reports; vol. 97).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Fossil fuels
Costs
Durability
Acoustic waves
Glass
4 Downloads (Pure)

Variation in shear properties of masonry

Vermeltfoort, A. T., 2010, 8th International Masonry Conference, Dresden, July 2010. Jäger, W., Haseltine, B. & Fried, A. (eds.). Dresden: International Masonry Society, p. 159-168

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Mortar
Prisms
Shear strength
Sand
Brick

Visualisation and research strategy for computational spatial and structural design interaction

Peeten, D. & Hofmeyer, H., 2010, CIB W78 2010 Program & Proceedings. Thabet, W. (ed.). Cairo, Egypt: Virginia Tech, Department of Building Construction, p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Structural design
Visualization
Engines
Sorting
Experiments
4 Citations (Scopus)

Wood modification in relation to bridge design in the Netherlands

Jorissen, A. J. M. & Luning, E., 2010, Proceedings of the World Conference on Timber Engieering, Trentino (Italy), June 2010. Ceccotti, A. & Kuilen, van der, J-W. (eds.). p. 1-9

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Wood
Timber
Wood preservation
Stiffness
Chemical modification
2009
128 Downloads (Pure)

Bracing Steel Frames with Adhesively Bonded Glass Panes - Mechanic Models

Huveners, E. M. P., Herwijnen, van, F., Soetens, F. & Hofmeyer, H., 2009, Conference proceedings Glass Performance Days, 11th International Conference on Architectural and Automotive Glass. Tampere, Finland: Glass Performance Days, Glaston Finland Oy, p. 256-260

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Glass
Steel
Adhesive joints
Facades
Stiffness

Cohesive modeling of ductile dynamic failure of pressurized metallic structures

Meulen, van der, O. R., Mediavilla, J., Weerheijm, J. & Soetens, F., 2009, Proceedings of the 12th International Conference on Fracture, ICF12, july 12-17 Ottawa Canada. Jones, R., Gao, M. & Azevedo, C. (eds.). ICF, p. 1-9

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Crack propagation
Cracks
Aluminum
4 Downloads (Pure)

Effects of support conditions on lintel-masonry interaction

Vermeltfoort, A. T., 2009, Proc. 11th Canadian Masonry Symposium, Ontario, June 2009. El-dakhakhni, W. W. & Drysdale, R. G. (eds.). McMaster University, p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Bearings (structural)
Precast concrete
Composite materials
Bearing capacity
Brick
3 Downloads (Pure)

Introduction to post-tensioned shear walls of calcium silicate element masonry

Meer, van der, L. J., Martens, D. R. W. & Vermeltfoort, A. T., 2009, Proc. 11th Canadian Masonry Symposium. El-dakhakhni, W. W. & Drysdale, R. G. (eds.). McMaster University, p. 59-68

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Calcium silicate
Shear walls
Bearings (structural)
Prestressing
Mortar
1 Downloads (Pure)

Lateral bracing force of IPE-240 beams at ultimate load

Snijder, H. H., Hoenderkamp, J. C. D., Bakker, M. C. M., Steenbergen, H. M. G. M. & Bruins, R. H. J., 2009, Proceedings of the 6th International Conference on Advances in Steel Structures, Hong Kong, 2009. Chan, SL. (ed.). Hong Kong, China, p. 205-212

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Buckling
Flanges
Stiffness
Defects

Parameter study on infilled steel frames with discretely connected precast concrete panels

Teeuwen, P. A., Kleinman, C. S., Snijder, H. H. & Hofmeyer, H., 2009, Proceedings of Sixth International Conference on Advances in Steel Structures 2009. Chan, S. L. (ed.). Hong Kong, China: The Hong Kong Institute of Steel Construction, Vol. 2. p. 826-833

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Precast concrete
Stiffness
Steel
Aspect ratio
Reinforcement

Perpendicular to grain bearing strength of timber

Leijten, A. J. M., 2009, Proceedings of the 33rd IABSE Symposium, Bangkok. Bangkok: International Association for Bridge and Structural Engineering, p. 1-7

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Bearings (structural)
Timber
Compressive strength
Bearing capacity
Structural design
2 Downloads (Pure)

Residual stresses in cold bent HE 100A steel arches

Spoorenberg, R. C., Snijder, H. H., Hoenderkamp, J. C. D. & Bakker, M. C. M., 2009, Proceedings of the Nordic Steel Construction Conference. Uppsala: Swedish Institute of Steel Construction, p. 414-421

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Arches
Residual stresses
Steel
Flanges
Cooling
4 Citations (Scopus)
4 Downloads (Pure)

The design rules in Eurocode 5 for compression perpendicular to the grain - continuous and semi continuous supported beams

Larsen, H. J., Leijten, A. J. M. & Put, van der, T. A. C. M., 2009, Proceedings CIB-W18, 42nd meeting, Zurich, August 2009. p. 1-12

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

4 Downloads (Pure)

Variation in mechanical properties of mortar and masonry

Vermeltfoort, A. T. & Martens, D. R. W., 2009, Proc. 11th Canadian Masonry Symposium, Ontario, June 2009. El-dakhakhni, W. W. & Drysdale, R. G. (eds.). McMaster University, p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

strength (mechanics)
mechanical properties
modulus of rupture
testing
shear stress